Re: Linux 3.2.16
From: Greg KH
Date: Sun Apr 22 2012 - 19:49:48 EST
diff --git a/Makefile b/Makefile
index 6195122..3da29cb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 15
+SUBLEVEL = 16
EXTRAVERSION =
NAME = Saber-toothed Squirrel
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c2effc9..9c18ebd 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -273,7 +273,7 @@ restart: adr r0, LC0
add r0, r0, #0x100
mov r1, r6
sub r2, sp, r6
- blne atags_to_fdt
+ bleq atags_to_fdt
ldmfd sp!, {r0-r3, ip, lr}
sub sp, sp, #0x10000
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 82ef81d..785365e 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -382,6 +382,18 @@ __v7_setup:
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
+#ifndef CONFIG_ARM_THUMBEE
+ mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
+ and r0, r0, #(0xf << 12) @ ThumbEE enabled field
+ teq r0, #(1 << 12) @ check if ThumbEE is present
+ bne 1f
+ mov r5, #0
+ mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
+ mrc p14, 6, r0, c0, c0, 0 @ load TEECR
+ orr r0, r0, #1 @ set the 1st bit in order to
+ mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
+1:
+#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h
index 8428525..21ab376 100644
--- a/arch/ia64/include/asm/futex.h
+++ b/arch/ia64/include/asm/futex.h
@@ -107,15 +107,16 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
return -EFAULT;
{
- register unsigned long r8 __asm ("r8") = 0;
+ register unsigned long r8 __asm ("r8");
unsigned long prev;
__asm__ __volatile__(
" mf;; \n"
- " mov ar.ccv=%3;; \n"
- "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n"
+ " mov %0=r0 \n"
+ " mov ar.ccv=%4;; \n"
+ "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n"
" .xdata4 \"__ex_table\", 1b-., 2f-. \n"
"[2:]"
- : "=r" (prev)
+ : "=r" (r8), "=r" (prev)
: "r" (uaddr), "r" (newval),
"rO" ((long) (unsigned) oldval)
: "memory");
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index f929db9..a3c40e8 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -90,7 +90,6 @@ config S390
select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
- select HAVE_RCU_TABLE_FREE if SMP
select ARCH_SAVE_PAGE_KEYS if HIBERNATION
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 8eef9b5..78e3041 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -22,10 +22,7 @@ void crst_table_free(struct mm_struct *, unsigned long *);
unsigned long *page_table_alloc(struct mm_struct *, unsigned long);
void page_table_free(struct mm_struct *, unsigned long *);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
void page_table_free_rcu(struct mmu_gather *, unsigned long *);
-void __tlb_remove_table(void *_table);
-#endif
static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
{
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index c687a2c..775a5ee 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -30,14 +30,10 @@
struct mmu_gather {
struct mm_struct *mm;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
-#endif
unsigned int fullmm;
- unsigned int need_flush;
};
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch {
struct rcu_head rcu;
unsigned int nr;
@@ -49,7 +45,6 @@ struct mmu_table_batch {
extern void tlb_table_flush(struct mmu_gather *tlb);
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
-#endif
static inline void tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm,
@@ -57,29 +52,20 @@ static inline void tlb_gather_mmu(struct mmu_gather *tlb,
{
tlb->mm = mm;
tlb->fullmm = full_mm_flush;
- tlb->need_flush = 0;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb->batch = NULL;
-#endif
if (tlb->fullmm)
__tlb_flush_mm(mm);
}
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
- if (!tlb->need_flush)
- return;
- tlb->need_flush = 0;
- __tlb_flush_mm(tlb->mm);
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb_table_flush(tlb);
-#endif
}
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
- tlb_flush_mmu(tlb);
+ tlb_table_flush(tlb);
}
/*
@@ -105,10 +91,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long address)
{
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return page_table_free_rcu(tlb, (unsigned long *) pte);
-#endif
page_table_free(tlb->mm, (unsigned long *) pte);
}
@@ -125,10 +109,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pmd);
-#endif
crst_table_free(tlb->mm, (unsigned long *) pmd);
#endif
}
@@ -146,10 +128,8 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
return;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pud);
-#endif
crst_table_free(tlb->mm, (unsigned long *) pud);
#endif
}
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 301c84d..f8ceac4 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -687,8 +687,6 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
}
}
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-
static void __page_table_free_rcu(void *table, unsigned bit)
{
struct page *page;
@@ -742,7 +740,66 @@ void __tlb_remove_table(void *_table)
free_pages((unsigned long) table, ALLOC_ORDER);
}
-#endif
+static void tlb_remove_table_smp_sync(void *arg)
+{
+ /* Simply deliver the interrupt */
+}
+
+static void tlb_remove_table_one(void *table)
+{
+ /*
+ * This isn't an RCU grace period and hence the page-tables cannot be
+ * assumed to be actually RCU-freed.
+ *
+ * It is however sufficient for software page-table walkers that rely
+ * on IRQ disabling. See the comment near struct mmu_table_batch.
+ */
+ smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+ __tlb_remove_table(table);
+}
+
+static void tlb_remove_table_rcu(struct rcu_head *head)
+{
+ struct mmu_table_batch *batch;
+ int i;
+
+ batch = container_of(head, struct mmu_table_batch, rcu);
+
+ for (i = 0; i < batch->nr; i++)
+ __tlb_remove_table(batch->tables[i]);
+
+ free_page((unsigned long)batch);
+}
+
+void tlb_table_flush(struct mmu_gather *tlb)
+{
+ struct mmu_table_batch **batch = &tlb->batch;
+
+ if (*batch) {
+ __tlb_flush_mm(tlb->mm);
+ call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
+ *batch = NULL;
+ }
+}
+
+void tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+ struct mmu_table_batch **batch = &tlb->batch;
+
+ if (*batch == NULL) {
+ *batch = (struct mmu_table_batch *)
+ __get_free_page(GFP_NOWAIT | __GFP_NOWARN);
+ if (*batch == NULL) {
+ __tlb_flush_mm(tlb->mm);
+ tlb_remove_table_one(table);
+ return;
+ }
+ (*batch)->nr = 0;
+ }
+ (*batch)->tables[(*batch)->nr++] = table;
+ if ((*batch)->nr == MAX_TABLE_BATCH)
+ tlb_table_flush(tlb);
+}
/*
* switch on pgstes for its userspace process (for kvm)
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 381edcd..27728e1 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1267,4 +1267,4 @@ static int __init ds_init(void)
return vio_register_driver(&ds_driver);
}
-subsys_initcall(ds_init);
+fs_initcall(ds_init);
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index 77f1b95..9171fc2 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -20,11 +20,6 @@
.text
.align 32
-__handle_softirq:
- call do_softirq
- nop
- ba,a,pt %xcc, __handle_softirq_continue
- nop
__handle_preemption:
call schedule
wrpr %g0, RTRAP_PSTATE, %pstate
@@ -89,9 +84,7 @@ rtrap:
cmp %l1, 0
/* mm/ultra.S:xcall_report_regs KNOWS about this load. */
- bne,pn %icc, __handle_softirq
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-__handle_softirq_continue:
rtrap_xcall:
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 1055769..6d276c2 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -358,6 +358,7 @@ typedef enum {
*/
struct acpi_object_extra {
ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *method_REG; /* _REG method for this region (if any) */
+ struct acpi_namespace_node *scope_node;
void *region_context; /* Region-specific data */
u8 *aml_start;
u32 aml_length;
diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c
index 42163d8..d69e4a5 100644
--- a/drivers/acpi/acpica/dsargs.c
+++ b/drivers/acpi/acpica/dsargs.c
@@ -384,7 +384,7 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
/* Execute the argument AML */
- status = acpi_ds_execute_arguments(node, node->parent,
+ status = acpi_ds_execute_arguments(node, extra_desc->extra.scope_node,
extra_desc->extra.aml_length,
extra_desc->extra.aml_start);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 110711a..8a06dc5 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -330,6 +330,12 @@ acpi_ex_create_region(u8 * aml_start,
region_obj2 = obj_desc->common.next_object;
region_obj2->extra.aml_start = aml_start;
region_obj2->extra.aml_length = aml_length;
+ if (walk_state->scope_info) {
+ region_obj2->extra.scope_node =
+ walk_state->scope_info->scope.node;
+ } else {
+ region_obj2->extra.scope_node = node;
+ }
/* Init the region from the operands */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e820b68..acda773 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -866,6 +866,7 @@ cciss_scsi_detect(ctlr_info_t *h)
sh->can_queue = cciss_tape_cmds;
sh->sg_tablesize = h->maxsgentries;
sh->max_cmd_len = MAX_COMMAND_SIZE;
+ sh->max_sectors = h->cciss_max_sectors;
((struct cciss_scsi_adapter_data_t *)
h->scsi_ctlr)->scsi_host = sh;
@@ -1410,7 +1411,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
/* track how many SG entries we are using */
if (request_nsgs > h->maxSG)
h->maxSG = request_nsgs;
- c->Header.SGTotal = (__u8) request_nsgs + chained;
+ c->Header.SGTotal = (u16) request_nsgs + chained;
if (request_nsgs > h->max_cmd_sgentries)
c->Header.SGList = h->max_cmd_sgentries;
else
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index db811d2..003cd8d 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -71,6 +71,8 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x311D) },
+ { USB_DEVICE(0x13d3, 0x3375) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -87,6 +89,8 @@ static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c16c750..db44ad5 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -101,6 +101,7 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0c10, 0x0000) },
/* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x0a5c, 0x21e3) },
{ USB_DEVICE(0x413c, 0x8197) },
{ } /* Terminating entry */
@@ -126,6 +127,8 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 48ad2a7..8f3d6db 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -237,7 +237,6 @@ static void hci_uart_destruct(struct hci_dev *hdev)
return;
BT_DBG("%s", hdev->name);
- kfree(hdev->driver_data);
}
/* ------ LDISC part ------ */
@@ -310,12 +309,13 @@ static void hci_uart_tty_close(struct tty_struct *tty)
hci_uart_close(hdev);
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
- hu->proto->close(hu);
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
+ hu->proto->close(hu);
}
+ kfree(hu);
}
}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5a99bb3..da85c0d 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -201,18 +201,17 @@ config PL330_DMA
platform_data for a dma-pl330 device.
config PCH_DMA
- tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223) DMA support"
+ tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223/ML7831) DMA support"
depends on PCI && X86
select DMA_ENGINE
help
Enable support for Intel EG20T PCH DMA engine.
-
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config IMX_SDMA
tristate "i.MX SDMA support"
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index a6d0e3d..629c430 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -1018,6 +1018,8 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev)
#define PCI_DEVICE_ID_ML7223_DMA2_4CH 0x800E
#define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017
#define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B
+#define PCI_DEVICE_ID_ML7831_DMA1_8CH 0x8810
+#define PCI_DEVICE_ID_ML7831_DMA2_4CH 0x8815
DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -1030,6 +1032,8 @@ DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA2_4CH), 4}, /* Video SPI */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA3_4CH), 4}, /* Security */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA4_4CH), 4}, /* FPGA */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_DMA1_8CH), 8}, /* UART */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_DMA2_4CH), 4}, /* SPI */
{ 0, },
};
@@ -1057,7 +1061,7 @@ static void __exit pch_dma_exit(void)
module_init(pch_dma_init);
module_exit(pch_dma_exit);
-MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH "
- "DMA controller driver");
+MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICON ML7213/ML7223/ML7831 IOH"
+ "DMA controller driver");
MODULE_AUTHOR("Yong Wang <yong.y.wang@xxxxxxxxx>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23..4e04157 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -387,7 +387,7 @@ config GPIO_LANGWELL
Say Y here to support Intel Langwell/Penwell GPIO.
config GPIO_PCH
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
depends on PCI && X86
select GENERIC_IRQ_CHIP
help
@@ -395,11 +395,12 @@ config GPIO_PCH
which is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH GPIO device.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7223.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7223 and ML7831.
ML7223 IOH is for MP(Media Phone) use.
- ML7223 is companion chip for Intel Atom E6xx series.
- ML7223 is completely compatible for Intel EG20T PCH.
+ ML7831 IOH is for general purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index a6008e1..779ff70 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -392,6 +392,7 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
chip->reg = chip->base;
pci_set_drvdata(pdev, chip);
mutex_init(&chip->lock);
+ spin_lock_init(&chip->spinlock);
pch_gpio_setup(chip);
ret = gpiochip_add(&chip->gpio);
if (ret) {
@@ -524,6 +525,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index e52b705..d0f8830 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -64,7 +64,7 @@ MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
+module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6 (default: -1 (use per-chip default)");
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9011f48..390768f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5646,12 +5646,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
if (is_lvds) {
temp = I915_READ(PCH_LVDS);
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (HAS_PCH_CPT(dev))
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~PORT_TRANS_SEL_MASK;
temp |= PORT_TRANS_SEL_CPT(pipe);
- else if (pipe == 1)
- temp |= LVDS_PIPEB_SELECT;
- else
- temp &= ~LVDS_PIPEB_SELECT;
+ } else {
+ if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
/* set the corresponsding LVDS_BORDER bit */
temp |= dev_priv->lvds_border_bits;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 94f860c..12eb789 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -219,14 +219,38 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
return (max_link_clock * max_lanes * 8) / 10;
}
+static bool
+intel_dp_adjust_dithering(struct intel_dp *intel_dp,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_rate, mode_rate;
+
+ mode_rate = intel_dp_link_required(mode->clock, 24);
+ max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+ if (mode_rate > max_rate) {
+ mode_rate = intel_dp_link_required(mode->clock, 18);
+ if (mode_rate > max_rate)
+ return false;
+
+ if (adjusted_mode)
+ adjusted_mode->private_flags
+ |= INTEL_MODE_DP_FORCE_6BPC;
+
+ return true;
+ }
+
+ return true;
+}
+
static int
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
- int max_lanes = intel_dp_max_lane_count(intel_dp);
- int max_rate, mode_rate;
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
@@ -236,16 +260,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
return MODE_PANEL;
}
- mode_rate = intel_dp_link_required(mode->clock, 24);
- max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
-
- if (mode_rate > max_rate) {
- mode_rate = intel_dp_link_required(mode->clock, 18);
- if (mode_rate > max_rate)
- return MODE_CLOCK_HIGH;
- else
- mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
- }
+ if (!intel_dp_adjust_dithering(intel_dp, mode, NULL))
+ return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
@@ -673,7 +689,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
- int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+ int bpp;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
@@ -687,6 +703,11 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
mode->clock = intel_dp->panel_fixed_mode->clock;
}
+ if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode))
+ return false;
+
+ bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 30a9af9..8673581 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1052,7 +1052,7 @@ int intel_init_ring_buffer(struct drm_device *dev,
* of the buffer.
*/
ring->effective_size = ring->size;
- if (IS_I830(ring->dev))
+ if (IS_I830(ring->dev) || IS_845G(ring->dev))
ring->effective_size -= 128;
return 0;
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 0f8eb48..5351ee1 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -246,6 +246,10 @@ atombios_dvo_setup(struct drm_encoder *encoder, int action)
if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
return;
+ /* some R4xx chips have the wrong frev */
+ if (rdev->family <= CHIP_RV410)
+ frev = 1;
+
switch (frev) {
case 1:
switch (crev) {
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index f7d39ac..4a4493f 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -946,7 +946,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
encoder = obj_to_encoder(obj);
- if (encoder->encoder_type != DRM_MODE_ENCODER_DAC ||
+ if (encoder->encoder_type != DRM_MODE_ENCODER_DAC &&
encoder->encoder_type != DRM_MODE_ENCODER_TVDAC)
continue;
@@ -976,6 +976,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
* cases the DVI port is actually a virtual KVM port connected to the service
* processor.
*/
+out:
if ((!rdev->is_atom_bios) &&
(ret == connector_status_disconnected) &&
rdev->mode_info.bios_hardcoded_edid_size) {
@@ -983,7 +984,6 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)
ret = connector_status_connected;
}
-out:
/* updated in get modes as well since we need to know if it's analog or digital */
radeon_connector_update_scratch_regs(connector, ret);
return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 7bb1b07..1441b00 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -890,6 +890,10 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
struct radeon_i2c_chan *i2c;
int ret;
+ /* don't add the mm_i2c bus unless hw_i2c is enabled */
+ if (rec->mm_i2c && (radeon_hw_i2c == 0))
+ return NULL;
+
i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL);
if (i2c == NULL)
return NULL;
diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c
index e7ddb49..baa019e 100644
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -143,6 +143,12 @@ static bool radeon_msi_ok(struct radeon_device *rdev)
(rdev->pdev->subsystem_device == 0x01fd))
return true;
+ /* RV515 seems to have MSI issues where it loses
+ * MSI rearms occasionally. This leads to lockups and freezes.
+ * disable it by default.
+ */
+ if (rdev->family == CHIP_RV515)
+ return false;
if (rdev->flags & RADEON_IS_IGP) {
/* APUs work fine with MSIs */
if (rdev->family >= CHIP_PALM)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 2a8722b..62a8e68 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1819,7 +1819,9 @@ int bitmap_load(struct mddev *mddev)
* re-add of a missing device */
start = mddev->recovery_cp;
+ mutex_lock(&mddev->bitmap_info.mutex);
err = bitmap_init_from_disk(bitmap, start);
+ mutex_unlock(&mddev->bitmap_info.mutex);
if (err)
goto out;
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 48406ca..43c7b25 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -1745,6 +1745,12 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
int err;
+ /* Ensure we have a valid MAC */
+ if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
+ pr_err("Error: Invalid MAC address\n");
+ return -EINVAL;
+ }
+
/* hardware has been reset, we need to reload some things */
pch_gbe_set_multi(netdev);
@@ -2467,9 +2473,14 @@ static int pch_gbe_probe(struct pci_dev *pdev,
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
- dev_err(&pdev->dev, "Invalid MAC Address\n");
- ret = -EIO;
- goto err_free_adapter;
+ /*
+ * If the MAC is invalid (or just missing), display a warning
+ * but do not abort setting up the device. pch_gbe_up will
+ * prevent the interface from being brought up until a valid MAC
+ * is set.
+ */
+ dev_err(&pdev->dev, "Invalid MAC address, "
+ "interface disabled.\n");
}
setup_timer(&adapter->watchdog_timer, pch_gbe_watchdog,
(unsigned long)adapter);
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
index 9cb5f91..29e23be 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
@@ -321,10 +321,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter)
pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
hw->phy.autoneg_advertised = opt.def;
} else {
- hw->phy.autoneg_advertised = AutoNeg;
- pch_gbe_validate_option(
- (int *)(&hw->phy.autoneg_advertised),
- &opt, adapter);
+ int tmp = AutoNeg;
+
+ pch_gbe_validate_option(&tmp, &opt, adapter);
+ hw->phy.autoneg_advertised = tmp;
}
}
@@ -495,9 +495,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
.arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list),
.p = fc_list } }
};
- hw->mac.fc = FlowControl;
- pch_gbe_validate_option((int *)(&hw->mac.fc),
- &opt, adapter);
+ int tmp = FlowControl;
+
+ pch_gbe_validate_option(&tmp, &opt, adapter);
+ hw->mac.fc = tmp;
}
pch_gbe_check_copper_options(adapter);
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 8ddef3e..d771de5 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -20,7 +20,6 @@
/* Common calibration code */
-#define ATH9K_NF_TOO_HIGH -60
static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
{
@@ -348,10 +347,10 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf)
"NF calibrated [%s] [chain %d] is %d\n",
(i >= 3 ? "ext" : "ctl"), i % 3, nf[i]);
- if (nf[i] > ATH9K_NF_TOO_HIGH) {
+ if (nf[i] > limit->max) {
ath_dbg(common, ATH_DBG_CALIBRATE,
"NF[%d] (%d) > MAX (%d), correcting to MAX\n",
- i, nf[i], ATH9K_NF_TOO_HIGH);
+ i, nf[i], limit->max);
nf[i] = limit->max;
} else if (nf[i] < limit->min) {
ath_dbg(common, ATH_DBG_CALIBRATE,
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9afcad3..d44d398 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -926,8 +926,13 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
ring = &rtlpci->tx_ring[BEACON_QUEUE];
pskb = __skb_dequeue(&ring->queue);
- if (pskb)
+ if (pskb) {
+ struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+ pci_unmap_single(rtlpci->pdev, rtlpriv->cfg->ops->get_desc(
+ (u8 *) entry, true, HW_DESC_TXBUFF_ADDR),
+ pskb->len, PCI_DMA_TODEVICE);
kfree_skb(pskb);
+ }
/*NB: the beacon data buffer must be 32-bit aligned. */
pskb = ieee80211_beacon_get(hw, mac->vif);
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index ff1b84b..e86edfc 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -339,8 +339,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
/* Enable the clockwatch on ST Variants */
- if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
- (ldata->hw_revision > 1))
+ if (ldata->hw_designer == AMBA_VENDOR_ST)
writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
ldata->base + RTC_CR);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8ba4510..7587796 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -346,14 +346,14 @@ config SPI_TI_SSP
serial port.
config SPI_TOPCLIFF_PCH
- tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
depends on PCI
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
- This driver also supports the ML7213, a companion chip for the
- Atom E6xx series and compatible with the Intel EG20T PCH.
+ This driver also supports the ML7213/ML7223/ML7831, a companion chip
+ for the Atom E6xx series and compatible with the Intel EG20T PCH.
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 027b6d0..54b9d2e 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -95,16 +95,18 @@
#define PCH_CLOCK_HZ 50000000
#define PCH_MAX_SPBR 1023
-/* Definition for ML7213 by OKI SEMICONDUCTOR */
+/* Definition for ML7213/ML7831 by OKI SEMICONDUCTOR */
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_SPI 0x802c
#define PCI_DEVICE_ID_ML7223_SPI 0x800F
+#define PCI_DEVICE_ID_ML7831_SPI 0x8816
/*
* Set the number of SPI instance max
* Intel EG20T PCH : 1ch
* OKI SEMICONDUCTOR ML7213 IOH : 2ch
* OKI SEMICONDUCTOR ML7223 IOH : 1ch
+ * OKI SEMICONDUCTOR ML7831 IOH : 1ch
*/
#define PCH_SPI_MAX_DEV 2
@@ -218,6 +220,7 @@ static struct pci_device_id pch_spi_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_SPI), 1, },
{ }
};
@@ -315,22 +318,23 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
data->tx_index = tx_index;
data->rx_index = rx_index;
- }
-
- /* if transfer complete interrupt */
- if (reg_spsr_val & SPSR_FI_BIT) {
- if ((tx_index == bpw_len) && (rx_index == tx_index)) {
- /* disable interrupts */
- pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
-
- /* transfer is completed;
- inform pch_spi_process_messages */
- data->transfer_complete = true;
- data->transfer_active = false;
- wake_up(&data->wait);
- } else {
- dev_err(&data->master->dev,
- "%s : Transfer is not completed", __func__);
+ /* if transfer complete interrupt */
+ if (reg_spsr_val & SPSR_FI_BIT) {
+ if ((tx_index == bpw_len) && (rx_index == tx_index)) {
+ /* disable interrupts */
+ pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
+ PCH_ALL);
+
+ /* transfer is completed;
+ inform pch_spi_process_messages */
+ data->transfer_complete = true;
+ data->transfer_active = false;
+ wake_up(&data->wait);
+ } else {
+ dev_err(&data->master->dev,
+ "%s : Transfer is not completed",
+ __func__);
+ }
}
}
}
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index fc9ee97..870db4f 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -521,7 +521,9 @@ static int hmc5843_detect(struct i2c_client *client,
/* Called when we have found a new HMC5843. */
static void hmc5843_init_client(struct i2c_client *client)
{
- struct hmc5843_data *data = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct hmc5843_data *data = iio_priv(indio_dev);
+
hmc5843_set_meas_conf(client, data->meas_conf);
hmc5843_set_rate(client, data->rate);
hmc5843_configure(client, data->operating_mode);
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 1d04c50..5ba0898 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -555,7 +555,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem)
port->mapbase = res_mem->start;
- else if (platp->mapbase)
+ else if (platp)
port->mapbase = platp->mapbase;
else
return -EINVAL;
@@ -563,7 +563,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
port->irq = res_irq->start;
- else if (platp->irq)
+ else if (platp)
port->irq = platp->irq;
/* Check platform data first so we can override device node data */
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8e00926..6da8cf8 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1380,6 +1380,10 @@ static int pl011_startup(struct uart_port *port)
uap->port.uartclk = clk_get_rate(uap->clk);
+ /* Clear pending error and receive interrupts */
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+ UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+
/*
* Allocate the IRQ
*/
@@ -1414,10 +1418,6 @@ static int pl011_startup(struct uart_port *port)
cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
- /* Clear pending error interrupts */
- writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
- uap->port.membase + UART011_ICR);
-
/*
* initialise the old status of the modem signals
*/
@@ -1432,6 +1432,9 @@ static int pl011_startup(struct uart_port *port)
* as well.
*/
spin_lock_irq(&uap->port.lock);
+ /* Clear out any spuriously appearing RX interrupts */
+ writew(UART011_RTIS | UART011_RXIS,
+ uap->port.membase + UART011_ICR);
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
@@ -1932,6 +1935,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->port.line = i;
pl011_dma_probe(uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
amba_ports[i] = uap;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d6aba8c..da776a0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1438,6 +1438,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
}
pci_enable_msi(pdev);
+ pci_set_master(pdev);
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 45887a0..c77f0d6 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1198,8 +1198,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
if (status == 0) {
status = usb_suspend_device(udev, msg);
- /* Again, ignore errors during system sleep transitions */
- if (!PMSG_IS_AUTO(msg))
+ /*
+ * Ignore errors from non-root-hub devices during
+ * system sleep transitions. For the most part,
+ * these devices should go to low power anyway when
+ * the entire bus is suspended.
+ */
+ if (udev->parent && !PMSG_IS_AUTO(msg))
status = 0;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index bc06a8f..e238b3b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3072,6 +3072,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (retval)
goto fail;
+ /*
+ * Some superspeed devices have finished the link training process
+ * and attached to a superspeed hub port, but the device descriptor
+ * got from those devices show they aren't superspeed devices. Warm
+ * reset the port attached by the devices can fix them.
+ */
+ if ((udev->speed == USB_SPEED_SUPER) &&
+ (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+ dev_err(&udev->dev, "got a wrong device descriptor, "
+ "warm reset device\n");
+ hub_port_reset(hub, port1, udev,
+ HUB_BH_RESET_TIME, true);
+ retval = -EINVAL;
+ goto fail;
+ }
+
if (udev->descriptor.bMaxPacketSize0 == 0xff ||
udev->speed == USB_SPEED_SUPER)
i = 512;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfed..aed3e07 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
- retval != -EBUSY)
+ retval != -EBUSY &&
+ retval != -EIDRM)
dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
}
spin_lock(&io->lock);
}
- urb->dev = NULL;
/* on the last completion, signal usb_sg_wait() */
io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
case -ENXIO: /* hc didn't queue this one */
case -EAGAIN:
case -ENOMEM:
- io->urbs[i]->dev = NULL;
retval = 0;
yield();
break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
/* fail any uncompleted urbs */
default:
- io->urbs[i]->dev = NULL;
io->urbs[i]->status = retval;
dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
if (!io->urbs [i]->dev)
continue;
retval = usb_unlink_urb(io->urbs [i]);
- if (retval != -EINPROGRESS && retval != -EBUSY)
+ if (retval != -EINPROGRESS
+ && retval != -ENODEV
+ && retval != -EBUSY
+ && retval != -EIDRM)
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 5048a0c..e7fb1a3 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -311,6 +311,7 @@ struct pch_udc_ep {
* @registered: driver regsitered with system
* @suspended: driver in suspended state
* @connected: gadget driver associated
+ * @vbus_session: required vbus_session state
* @set_cfg_not_acked: pending acknowledgement 4 setup
* @waiting_zlp_ack: pending acknowledgement 4 ZLP
* @data_requests: DMA pool for data requests
@@ -337,6 +338,7 @@ struct pch_udc_dev {
registered:1,
suspended:1,
connected:1,
+ vbus_session:1,
set_cfg_not_acked:1,
waiting_zlp_ack:1;
struct pci_pool *data_requests;
@@ -554,6 +556,29 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
}
/**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ * and clear the disconnect status.
+ * @dev: Reference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev);
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+ pch_udc_init(dev);
+
+ /* enable device interrupts */
+ /* pch_udc_enable_interrupts() */
+ pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+ UDC_DEVINT_UR | UDC_DEVINT_ENUM);
+
+ /* Clear the disconnect */
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+ mdelay(1);
+ /* Resume USB signalling */
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
* pch_udc_vbus_session() - set or clearr the disconnect status.
* @dev: Reference to pch_udc_regs structure
* @is_active: Parameter specifying the action
@@ -563,10 +588,18 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
int is_active)
{
- if (is_active)
- pch_udc_clear_disconnect(dev);
- else
+ if (is_active) {
+ pch_udc_reconnect(dev);
+ dev->vbus_session = 1;
+ } else {
+ if (dev->driver && dev->driver->disconnect) {
+ spin_unlock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
pch_udc_set_disconnect(dev);
+ dev->vbus_session = 0;
+ }
}
/**
@@ -1126,7 +1159,17 @@ static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
if (!gadget)
return -EINVAL;
dev = container_of(gadget, struct pch_udc_dev, gadget);
- pch_udc_vbus_session(dev, is_on);
+ if (is_on) {
+ pch_udc_reconnect(dev);
+ } else {
+ if (dev->driver && dev->driver->disconnect) {
+ spin_unlock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+ pch_udc_set_disconnect(dev);
+ }
+
return 0;
}
@@ -2335,8 +2378,11 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
/* Complete request queue */
empty_req_queue(ep);
}
- if (dev->driver && dev->driver->disconnect)
+ if (dev->driver && dev->driver->disconnect) {
+ spin_unlock(&dev->lock);
dev->driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
}
/**
@@ -2371,6 +2417,11 @@ static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
pch_udc_set_dma(dev, DMA_DIR_TX);
pch_udc_set_dma(dev, DMA_DIR_RX);
pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+
+ /* enable device interrupts */
+ pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+ UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+ UDC_DEVINT_SI | UDC_DEVINT_SC);
}
/**
@@ -2472,8 +2523,24 @@ static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
if (dev_intr & UDC_DEVINT_SC)
pch_udc_svc_cfg_interrupt(dev);
/* USB Suspend interrupt */
- if (dev_intr & UDC_DEVINT_US)
+ if (dev_intr & UDC_DEVINT_US) {
+ if (dev->driver
+ && dev->driver->suspend) {
+ spin_unlock(&dev->lock);
+ dev->driver->suspend(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
+ if (dev->vbus_session == 0) {
+ if (dev->driver && dev->driver->disconnect) {
+ spin_unlock(&dev->lock);
+ dev->driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+ pch_udc_reconnect(dev);
+ }
dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+ }
/* Clear the SOF interrupt, if enabled */
if (dev_intr & UDC_DEVINT_SOF)
dev_dbg(&dev->pdev->dev, "SOF\n");
@@ -2499,6 +2566,14 @@ static irqreturn_t pch_udc_isr(int irq, void *pdev)
dev_intr = pch_udc_read_device_interrupts(dev);
ep_intr = pch_udc_read_ep_interrupts(dev);
+ /* For a hot plug, this find that the controller is hung up. */
+ if (dev_intr == ep_intr)
+ if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+ dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+ /* The controller is reset */
+ pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+ return IRQ_HANDLED;
+ }
if (dev_intr)
/* Clear device interrupts */
pch_udc_write_device_interrupts(dev, dev_intr);
@@ -2912,8 +2987,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
}
pch_udc = dev;
/* initialize the hardware */
- if (pch_udc_pcd_init(dev))
+ if (pch_udc_pcd_init(dev)) {
+ retval = -ENODEV;
goto finished;
+ }
if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
dev)) {
dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 7732d69..2afff88 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
}
}
- /* Disable any BIOS SMIs */
- writel(XHCI_LEGACY_DISABLE_SMI,
- base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index c7f3312..377f424 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
/* USB Legacy Support Control and Status Register - section 7.1.2 */
/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
#define XHCI_L1C (1 << 16)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c69cf54..01c3800 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1704,11 +1704,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
- if (xhci->ir_set) {
- xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
- }
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
dma_free_coherent(&pdev->dev, size,
@@ -1720,7 +1715,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
@@ -1749,7 +1743,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->medium_streams_pool = NULL;
xhci_dbg(xhci, "Freed medium stream array pool\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
@@ -2358,6 +2351,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
+ xhci_halt(xhci);
+ xhci_reset(xhci);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef98b38..211296a 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
}
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
}
/* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index ae92dc4..43b3447 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2343,7 +2343,7 @@ hw_died:
u32 irq_pending;
/* Acknowledge the PCI interrupt */
irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- irq_pending |= 0x3;
+ irq_pending |= IMAN_IP;
xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 034f554..4c00606 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -664,11 +664,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
- xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
}
static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -677,10 +677,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
- xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
- xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 09eda3a..4850c4d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
#define CMD_PM_INDEX (1 << 11)
/* bits 12:31 are reserved (and should be preserved on writes). */
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP (1 << 1)
+#define IMAN_IE (1 << 0)
+
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
#define STS_HALT XHCI_STS_HALT
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f2c9ef7..c4cf3f3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,7 +75,8 @@ struct ftdi_private {
unsigned long last_dtr_rts; /* saved modem control outputs */
struct async_icount icount;
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
- char prev_status, diff_status; /* Used for TIOCMIWAIT */
+ char prev_status; /* Used for TIOCMIWAIT */
+ bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
struct usb_serial_port *port;
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
@@ -1679,6 +1680,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
+ priv->dev_gone = false;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
@@ -1836,6 +1838,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
dbg("%s", __func__);
+ priv->dev_gone = true;
+ wake_up_interruptible_all(&priv->delta_msr_wait);
+
remove_sysfs_attrs(port);
kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -1979,17 +1984,19 @@ static int ftdi_process_packet(struct tty_struct *tty,
N.B. packet may be processed more than once, but differences
are only processed once. */
status = packet[0] & FTDI_STATUS_B0_MASK;
- if (status & FTDI_RS0_CTS)
- priv->icount.cts++;
- if (status & FTDI_RS0_DSR)
- priv->icount.dsr++;
- if (status & FTDI_RS0_RI)
- priv->icount.rng++;
- if (status & FTDI_RS0_RLSD)
- priv->icount.dcd++;
if (status != priv->prev_status) {
- priv->diff_status |= status ^ priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ char diff_status = status ^ priv->prev_status;
+
+ if (diff_status & FTDI_RS0_CTS)
+ priv->icount.cts++;
+ if (diff_status & FTDI_RS0_DSR)
+ priv->icount.dsr++;
+ if (diff_status & FTDI_RS0_RI)
+ priv->icount.rng++;
+ if (diff_status & FTDI_RS0_RLSD)
+ priv->icount.dcd++;
+
+ wake_up_interruptible_all(&priv->delta_msr_wait);
priv->prev_status = status;
}
@@ -2388,15 +2395,12 @@ static int ftdi_ioctl(struct tty_struct *tty,
*/
case TIOCMIWAIT:
cprev = priv->icount;
- while (1) {
+ while (!priv->dev_gone) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
cnow = priv->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
@@ -2405,7 +2409,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
}
cprev = cnow;
}
- /* not reached */
+ return -EIO;
break;
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54898c9..cbe3451 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index fc2d66f..5532ea5 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -421,7 +421,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- else
+ else if ((old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index b18179b..7c3ec9e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
{ USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
+ { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cc274fd..38d7ebd 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
serial->attached = 1;
}
+ /* Avoid race with tty_open and serial_install by setting the
+ * disconnected flag and not clearing it until all ports have been
+ * registered.
+ */
+ serial->disconnected = 1;
+
if (get_free_serial(serial, num_ports, &minor) == NULL) {
dev_err(&interface->dev, "No more free serial devices\n");
goto probe_error;
@@ -1083,6 +1089,8 @@ int usb_serial_probe(struct usb_interface *interface,
}
}
+ serial->disconnected = 0;
+
usb_serial_console_init(debug, minor);
exit:
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 7f8472c..8813588 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -815,8 +815,15 @@ static int __devinit uvesafb_vbe_init(struct fb_info *info)
par->pmi_setpal = pmi_setpal;
par->ypan = ypan;
- if (par->pmi_setpal || par->ypan)
- uvesafb_vbe_getpmi(task, par);
+ if (par->pmi_setpal || par->ypan) {
+ if (__supported_pte_mask & _PAGE_NX) {
+ par->pmi_setpal = par->ypan = 0;
+ printk(KERN_WARNING "uvesafb: NX protection is actively."
+ "We have better not to use the PMI.\n");
+ } else {
+ uvesafb_vbe_getpmi(task, par);
+ }
+ }
#else
/* The protected mode interface is not available on non-x86. */
par->pmi_setpal = par->ypan = 0;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index dbae4d9..7b1cd5c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1185,9 +1185,6 @@ struct ext4_sb_info {
unsigned long s_ext_blocks;
unsigned long s_ext_extents;
#endif
- /* ext4 extent cache stats */
- unsigned long extent_cache_hits;
- unsigned long extent_cache_misses;
/* for buddy allocator */
struct ext4_group_info ***s_group_info;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7507036..c2a2012 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2052,10 +2052,6 @@ static int ext4_ext_check_cache(struct inode *inode, ext4_lblk_t block,
ret = 1;
}
errout:
- if (!ret)
- sbi->extent_cache_misses++;
- else
- sbi->extent_cache_hits++;
trace_ext4_ext_in_cache(inode, block, ret);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
return ret;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9281dbe..961059b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2504,18 +2504,6 @@ static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a,
EXT4_SB(sb)->s_sectors_written_start) >> 1)));
}
-static ssize_t extent_cache_hits_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%lu\n", sbi->extent_cache_hits);
-}
-
-static ssize_t extent_cache_misses_show(struct ext4_attr *a,
- struct ext4_sb_info *sbi, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%lu\n", sbi->extent_cache_misses);
-}
-
static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
struct ext4_sb_info *sbi,
const char *buf, size_t count)
@@ -2573,8 +2561,6 @@ static struct ext4_attr ext4_attr_##name = __ATTR(name, mode, show, store)
EXT4_RO_ATTR(delayed_allocation_blocks);
EXT4_RO_ATTR(session_write_kbytes);
EXT4_RO_ATTR(lifetime_write_kbytes);
-EXT4_RO_ATTR(extent_cache_hits);
-EXT4_RO_ATTR(extent_cache_misses);
EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, sbi_ui_show,
inode_readahead_blks_store, s_inode_readahead_blks);
EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
@@ -2590,8 +2576,6 @@ static struct attribute *ext4_attrs[] = {
ATTR_LIST(delayed_allocation_blocks),
ATTR_LIST(session_write_kbytes),
ATTR_LIST(lifetime_write_kbytes),
- ATTR_LIST(extent_cache_hits),
- ATTR_LIST(extent_cache_misses),
ATTR_LIST(inode_readahead_blks),
ATTR_LIST(inode_goal),
ATTR_LIST(mb_stats),
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index aaf79af..a7e13bf 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -84,6 +84,7 @@ enum {
HCI_SERVICE_CACHE,
HCI_LINK_KEYS,
HCI_DEBUG_KEYS,
+ HCI_UNREGISTER,
HCI_RESET,
};
diff --git a/kernel/futex.c b/kernel/futex.c
index 0677023..866c9d5 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -59,6 +59,7 @@
#include <linux/magic.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
+#include <linux/ptrace.h>
#include <asm/futex.h>
@@ -2443,40 +2444,29 @@ SYSCALL_DEFINE3(get_robust_list, int, pid,
{
struct robust_list_head __user *head;
unsigned long ret;
- const struct cred *cred = current_cred(), *pcred;
+ struct task_struct *p;
if (!futex_cmpxchg_enabled)
return -ENOSYS;
+ rcu_read_lock();
+
+ ret = -ESRCH;
if (!pid)
- head = current->robust_list;
+ p = current;
else {
- struct task_struct *p;
-
- ret = -ESRCH;
- rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p)
goto err_unlock;
- ret = -EPERM;
- pcred = __task_cred(p);
- /* If victim is in different user_ns, then uids are not
- comparable, so we must have CAP_SYS_PTRACE */
- if (cred->user->user_ns != pcred->user->user_ns) {
- if (!ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
- goto ok;
- }
- /* If victim is in same user_ns, then uids are comparable */
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid &&
- !ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
-ok:
- head = p->robust_list;
- rcu_read_unlock();
}
+ ret = -EPERM;
+ if (!ptrace_may_access(p, PTRACE_MODE_READ))
+ goto err_unlock;
+
+ head = p->robust_list;
+ rcu_read_unlock();
+
if (put_user(sizeof(*head), len_ptr))
return -EFAULT;
return put_user(head, head_ptr);
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 5f9e689..a9642d5 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -10,6 +10,7 @@
#include <linux/compat.h>
#include <linux/nsproxy.h>
#include <linux/futex.h>
+#include <linux/ptrace.h>
#include <asm/uaccess.h>
@@ -136,40 +137,29 @@ compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr,
{
struct compat_robust_list_head __user *head;
unsigned long ret;
- const struct cred *cred = current_cred(), *pcred;
+ struct task_struct *p;
if (!futex_cmpxchg_enabled)
return -ENOSYS;
+ rcu_read_lock();
+
+ ret = -ESRCH;
if (!pid)
- head = current->compat_robust_list;
+ p = current;
else {
- struct task_struct *p;
-
- ret = -ESRCH;
- rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p)
goto err_unlock;
- ret = -EPERM;
- pcred = __task_cred(p);
- /* If victim is in different user_ns, then uids are not
- comparable, so we must have CAP_SYS_PTRACE */
- if (cred->user->user_ns != pcred->user->user_ns) {
- if (!ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
- goto ok;
- }
- /* If victim is in same user_ns, then uids are comparable */
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid &&
- !ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
-ok:
- head = p->compat_robust_list;
- rcu_read_unlock();
}
+ ret = -EPERM;
+ if (!ptrace_may_access(p, PTRACE_MODE_READ))
+ goto err_unlock;
+
+ head = p->compat_robust_list;
+ rcu_read_unlock();
+
if (put_user(sizeof(*head), len_ptr))
return -EFAULT;
return put_user(ptr_to_compat(head), head_ptr);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 4042064..c923640 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -508,9 +508,9 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
hrtimer_get_expires(&ts->sched_timer), 0))
break;
}
- /* Update jiffies and reread time */
- tick_do_update_jiffies64(now);
+ /* Reread time and update jiffies */
now = ktime_get();
+ tick_do_update_jiffies64(now);
}
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2316840..bd936ed 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2686,6 +2686,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
* so no worry about deadlock.
*/
page = pte_page(entry);
+ get_page(page);
if (page != pagecache_page)
lock_page(page);
@@ -2717,6 +2718,7 @@ out_page_table_lock:
}
if (page != pagecache_page)
unlock_page(page);
+ put_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b84458d..857dc88 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -510,6 +510,11 @@ int hci_dev_open(__u16 dev)
hci_req_lock(hdev);
+ if (test_bit(HCI_UNREGISTER, &hdev->flags)) {
+ ret = -ENODEV;
+ goto done;
+ }
+
if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
ret = -ERFKILL;
goto done;
@@ -1540,6 +1545,8 @@ int hci_unregister_dev(struct hci_dev *hdev)
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
+ set_bit(HCI_UNREGISTER, &hdev->flags);
+
write_lock_bh(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock_bh(&hci_dev_list_lock);
diff --git a/security/commoncap.c b/security/commoncap.c
index ee4f848..12440ee 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -28,6 +28,7 @@
#include <linux/prctl.h>
#include <linux/securebits.h>
#include <linux/user_namespace.h>
+#include <linux/personality.h>
/*
* If a non-root user executes a setuid-root binary in
@@ -514,6 +515,11 @@ int cap_bprm_set_creds(struct linux_binprm *bprm)
}
skip:
+ /* if we have fs caps, clear dangerous personality flags */
+ if (!cap_issubset(new->cap_permitted, old->cap_permitted))
+ bprm->per_clear |= PER_CLEAR_ON_SETID;
+
+
/* Don't let someone trace a set[ug]id/setpcap binary with the revised
* credentials unless they have the appropriate permit
*/
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 216e33a..adb372d 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -230,6 +230,18 @@ struct hist_entry *__hists__add_entry(struct hists *hists,
if (!cmp) {
he->period += period;
++he->nr_events;
+
+ /* If the map of an existing hist_entry has
+ * become out-of-date due to an exec() or
+ * similar, update it. Otherwise we will
+ * mis-adjust symbol addresses when computing
+ * the history counter to increment.
+ */
+ if (he->ms.map != entry->ms.map) {
+ he->ms.map = entry->ms.map;
+ if (he->ms.map)
+ he->ms.map->referenced = true;
+ }
goto out;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/