Caching issues with tmpfs?

[Florian Fainelli]

Hi Hugh,

I am encountering a very weird and serious issue with tmpfs, which I 
have seen both in 2.6.39 and 3.2.13. The issue is the following:

1) I read a file from a NAND device back to /tmp/bar
2) /tmp/bar is loopback mounted to /tmp/bar_mount/
3) when I list the contents of /tmp/bar_mount I see only half of my 
files, and using hexdump on /tmp/bar shows that the cramfs header is 
correct and contains all, which rules out the cramfs issue
4) if I move /tmp/bar to /tmp/bar.move and loopback mount /tmp/bar.move 
to /tmp/bar_mount, I now see all the files present

I have compared the md5sums of the cramfs file before mounting, after 
mounting, before moving, after moving, they are all the same. Also, the 
loopback mount does not yiel when mounting the cramfs file, which rules 
out its bad integrity.

the /tmp directory is mounted with the defaults attributes (rw,relatime).

My system is a x86 Atom-based System-on-a-Chip and should not suffer 
from the CPU data cache aliasing issue mentioned here: 
http://lkml.indiana.edu/hypermail/linux/kernel/1202.0/00090.html

I backported this patch however, and it does not make any difference as 
expected.

This behavior has been observed on several devices.

I will try to provide you with a test case to reproduce the issue, 
meanwhile any hints are appreciated :)

Thanks!
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/