[PATCH RFC] gpio: Device tree support for LPC32xx

From: Roland Stigge
Date: Mon Apr 02 2012 - 10:21:14 EST


This patch adds device tree support for gpio-lpc32xx.c

---

Hi!

I'm adding device tree support to the LPC32xx platform. Currently struggling
with GPIO, see patch below.

Generally, it works - GPIOs registered successfully like before:

================================================================
gpiochip_add: registered GPIOs 0 to 7 on device: gpio_p0
gpiochip_add: registered GPIOs 8 to 31 on device: gpio_p1
gpiochip_add: registered GPIOs 32 to 44 on device: gpio_p2
gpiochip_add: registered GPIOs 45 to 50 on device: gpio_p3
gpiochip_add: registered GPIOs 51 to 78 on device: gpi_p3
gpiochip_add: registered GPIOs 79 to 102 on device: gpo_p3
================================================================

But in connection with gpio-leds which I'm using like this:

leds {
compatible = "gpio-leds";
led0 {
gpios = <&gpio 0x50 1>; /* GPIO 80, active low */
linux,default-trigger = "heartbeat";
default-state = "keep";
};
};

I get the following error:

================================================================
Skipping unavailable LED gpio -22 (led0)
================================================================

Traced it back to drivers/of/gpio.c:144: (errno: -22 == -EINVAL)

When I disable the "lpc32xx_gpiochip[i].of_node = pdev->dev.of_node" in l.466,
it changes to:

================================================================
Skipping unavailable LED gpio -19 (led0)
================================================================

which comes from drivers/of/gpio.c:52: (errno: -19 == -ENODEV)

I suspect the strategy to do several gpiochip_add()s, ported from the non-DT
platform code, doesn't work well with the of_* registration - e.g.,
gpiochip_find() compares the static structs I'm registering with gpiochip_add()
with another (of_node's) one not in the registeded list. Should the various
GPIO areas be moved from lpc32xx_gpiochip[] to a dts file? So many callbacks
and memory references in there...

Any suggestions appreciated!

Thanks in advance,

Roland


Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt | 18 ++++++++
arch/arm/mach-lpc32xx/include/mach/gpio.h | 9 +++-
drivers/gpio/gpio-lpc32xx.c | 34 +++++++++++++++-
3 files changed, 58 insertions(+), 3 deletions(-)

--- /dev/null
+++ linux-2.6/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
@@ -0,0 +1,18 @@
+NXP LPC32xx SoC GPIO controller
+
+Required properties:
+- compatible : "nxp,lpc32xx-gpio"
+- reg : Physical base address and length of the controller's registers.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Example:
+
+gpio: gpio@40028000 {
+ compatible = "nxp,lpc32xx-gpio";
+ reg = <0x40028000 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
--- linux-2.6.orig/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ linux-2.6/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1 +1,8 @@
-/* empty */
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include "gpio-lpc32xx.h"
+
+#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
+
+#endif /* __MACH_GPIO_H */
--- linux-2.6.orig/drivers/gpio/gpio-lpc32xx.c
+++ linux-2.6/drivers/gpio/gpio-lpc32xx.c
@@ -21,6 +21,9 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>

#include <mach/hardware.h>
#include <mach/platform.h>
@@ -454,10 +457,37 @@ static struct lpc32xx_gpio_chip lpc32xx_
},
};

-void __init lpc32xx_gpio_init(void)
+static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev)
{
int i;

- for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+ for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
+#ifdef CONFIG_OF_GPIO
+ lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
+#endif
gpiochip_add(&lpc32xx_gpiochip[i].chip);
+ }
+
+ return 0;
}
+
+static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = {
+ { .compatible = "nxp,lpc32xx-gpio", },
+ { },
+};
+
+static struct platform_driver lpc32xx_gpio_driver = {
+ .driver = {
+ .name = "lpc32xx-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = lpc32xx_gpio_of_match,
+ },
+ .probe = lpc32xx_gpio_probe,
+};
+
+static int __init lpc32xx_gpio_init(void)
+{
+ return platform_driver_register(&lpc32xx_gpio_driver);
+}
+postcore_initcall(lpc32xx_gpio_init);
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/