Re: [PATCH v3] PM / QoS: Introduce new classes: DMA-Throughput and DVFS-Latency

From: Rafael J. Wysocki
Date: Fri Mar 16 2012 - 19:57:32 EST


On Friday, March 16, 2012, MyungJoo Ham wrote:
> On Sun, Mar 11, 2012 at 7:53 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> > On Friday, March 09, 2012, MyungJoo Ham wrote:
> >> On Thu, Mar 8, 2012 at 12:47 PM, mark gross <markgross@xxxxxxxxxxx> wrote:
> >> > On Wed, Mar 07, 2012 at 02:02:01PM +0900, MyungJoo Ham wrote:
> >> >> 1. CPU_DMA_THROUGHPUT
> >> ...
> >> >> 2. DVFS_LATENCY
> >> >
> >> > The cpu_dma_throughput looks ok to me. I do however; wonder about the
> >> > dvfs_lat_pm_qos. Should that knob be exposed to user mode? Does that
> >> > matter so much? why can't dvfs_lat use the cpu_dma_lat?
> >> >
> >> > BTW I'll be out of town for the next 10 days and probably will not get
> >> > to this email account until I get home.
> >> >
> >> > --mark
> >> >
> >>
> >> 1. Should DVFS Latency be exposed to user mode?
> >>
> >> It would depend on the policy of the given system; however, yes, there
> >> are systems that require a user interface for DVFS Latency.
> >> With the example of user input response (response to user click,
> >> typing, touching, and etc), a user program (probably platform s/w or
> >> middleware) may input QoS requests. Besides, when a new "application"
> >> is starting, such "middleware" may want faster responses from DVFS
> >> mechanisms.
> >
> > But this is a global knob, isn't it? And it seems that a per-device one
> > is needed rather than that?
> >
> > It also applies to your CPU_DMA_THROUGHPUT thing, doesn't it?
>
>
> Yes, the two are global knobs. And both the two control multiple
> devices simultaneously, not just a single device. I suppose per-device
> QoS is appropriate for QoS requests directed to a single device. Am I
> right about this one?
>
>
> Let's assume that, in an example system, we have devfreq on GPU,
> memory-Interface, and main bus and CPUfreq (Exynos5 will have them all
> seperated).
>
> If we use per-device QoS for DVFS LATENCY, in order to control the
> DVFS response latency, we will need to make QoS requests to all the
> four devices independently, not to the global DVFS LATENCY QOS CLASS.
> There, we could have a shared single QoS request list for these four
> DVFS devices, saying that the DVFS response should be done in "50ms"
> after a sudden utilization increase.

I think that the fact that you use the same value for all of those things
is a policy decision. You might as well use different values for different
things and the decision whether or not to do that should be left to user
space, IMO.

> We may be able to use "dev_pm_qos_add_notifier()" for a virtual device
> representing "DVFS Latency" or "DMA Throughput" and let the GPU, CPU,
> main-bus, and memory-interface listen to the events from the virtual
> device. Hmm..., do you recommend this approach? creating a device
> representing "DVFS" as a whole (both CPUFreq and device drivers of
> devfreq).

While there may be an interface representing a "global" or "default"
setting, I don't think it really should be a device. Just a separate
interface with well defined purpose.

> CPU_DMA_THROUGHPUT is quite similar as CPU_DMA_LATENCY. However, we
> think it is addtionally needed because many IPs (in-SoC devices) need
> to specify its DMA usage in "kbytes/sec", not "usecs/ops". For
> example, a video-decoding chip device driver may say it requires
> "750000kbytes/sec" for 1080p60, "300000kbytes/sec" for 720p60, and so
> on, which affects CPUfreq, memory-interface, and main-bus at the same
> time.

That depends on what you want to use that for. I'd really prefer to
see it in one patch along with the user.

> >> 2. Does DVFS Latency matter?
> >>
> >> Yes, in our experimental sets w/ Exynos4210 (those slapped in Galaxy
> >> S2 equivalent; not exactly as I'm not conducted in Android systems,
> >> but Tizen), we could see noticable difference w/ bare eyes for
> >> user-input responses. When we shortened DVFS polling interval with
> >> touches, the touch responses were greatly improved; e.g., losing 10
> >> frames into losing 0 or 1 frame for a sudden input rush.
> >
> > Well, this basically means PM QoS matters, which is kind of obvious.
> > It doesn't mean that it can't be implemented in a better way, though.
>
> For DVFS-Latency and DMA-Throughput, I think a normal pm-qos-dev (one
> device per one qos knob) isn't appropriate because there are multiple
> devices that are required to react simultaneously.
>
> It is possible to let multiple devices react by adding notifiers with
> dev_pm_qos_add_notifier(). However, I felt that it wasn't the purpose
> of this one and it might get things ugly.

I agree with that.

> Anyway, was allowing multiple devices to change their
> frequencies/voltages for a single per-device QoS list the purpose of
> dev_pm_qos_add_notifier()?

Well, please first tell me why exactly those devices are _required_ to
react simultaneously.

> Just throwing an idea and suggestion if it was the purpose,
> I speculate that If we are going to do this (supporting multiple
> devices per one qos knob without adding QoS class), we'd better create
> "qos class device" in /drivers/qos/ and let those qos class handle
> multiple devices depending on a single "qos class". Probably, this
> will transform "global PM-QoS class" that notifies related devices
> into "QoS class device" that notifies related devices.

At a general level, it would make sense to use a single PM QoS "knob"
for multiple devices at the same time, with an in-kernel API to
add/remove devices to/from such a "class". The details depend on the
implementation, though.

> >
> >> 3. Why not replace DVFS Latency w/ CPU-DMA-Latency/Throughput?
> >>
> >> When we implement the user-input response enhancement with CPU-DMA QoS
> >> requests, the PM-QoS will unconditionally increase CPU and BUS
> >> frequencies/voltages with user inputs. However, with many cases it is
> >> unnecessary; i.e., a user input means that there will be unexpected
> >> changes soon; however, the change does not mean that the load will
> >> increase. Thus, allowing DVFS mechanism to evolve faster was enough to
> >> shorten the response time and not to increase frequencies and voltages
> >> when not needed. There were significant difference in power
> >> consumption with this changes if the user inputs were not involving
> >> drastic graphics jobs; e.g., typing a text message.
> >
> > Again, you're arguing for having PM QoS rather than not having it. You don't
> > have to do that. :-)
> >
> > Generally speaking, I don't think we should add any more PM QoS "classes"
> > as defined in pm_qos.h, since they are global and there's only one
> > list of requests per class. While that may be good for CPU power
> > management (in an SMP system all CPUs are identical, so the same list of
> > requests may be applied to all of them), it generally isn't for I/O
> > devices (some of them work in different time scales, for example).
> >
> > So, for example, most likely, a list of PM QoS requests for storage devices
> > shouldn't be applied to input devices (keyboards and mice to be precise) and
> > vice versa.
> >
> > On the other hand, I don't think that applications should access PM QoS
> > interfaces associated with individual devices directly, because they may
> > not have enough information about the relationships between devices in the
> > system. So, perhaps, there needs to be an interface allowing applications
> > to specify their PM QoS expectations in a general way (e.g. "I want <number>
> > disk I/O throughput") and a code layer between that interface and device
> > drivers translating those expecataions into PM QoS requests for specific
> > devices.
>
> With DVFS Latency PM QoS Class, we can say "I want the system to react
> in 50ms for any sudden utilization increases.". Without it, we should
> say, for example, "CPUFreq/Ondemand should set interval at 25ms,
> Devfreq/Bus should set interval at 25ms, and Devfreq/GPU should set
> interval at 10ms."
>
> And with CPU Throughput PM QoS Class, we can say "I want 1000000
> kbytes/sec DMA transfer". Without it, we should say "Memory-Interface
> at 1000000 kbytes/sec, Exynos4412 core should be at least 500MHz, and
> Bus should be at least 166MHz".

That really depends on the design of the user space "management" layer.
Ideally, it should translate global requirements (like "I want the system to
react in 50ms for any sudden utilization increases") into specific PM QoS
settings (presumably with some user or platform designer configuration
input). If we try to do that in the kernel, we'll end up with a quite
inflexible system.

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/