[PATCH 3/3] powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
From: Vinh Nguyen Huu Tuong
Date: Tue Dec 20 2011 - 07:52:02 EST
This patch extends PCI-E driver to support PCI-E for APM821xx SoC on Bluestone board.
Signed-off-by: Vinh Nguyen Huu Tuong <vhtnguyen@xxxxxxx>
---
arch/powerpc/platforms/44x/Kconfig | 1 +
arch/powerpc/sysdev/ppc4xx_pci.c | 109 +++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/ppc4xx_pci.h | 4 +
3 files changed, 112 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 762322c..cd62377 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -23,6 +23,7 @@ config BLUESTONE
default n
select PPC44x_SIMPLE
select APM821xx
+ select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII
help
This option enables support for the APM APM821xx Evaluation board.
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 862f11b..4e866a5 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1040,6 +1040,109 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
.check_link = ppc4xx_pciex_check_link_sdr,
};
+static int __init apm821xx_pciex_core_init(struct device_node *np)
+{
+ /* Return the number of pcie port */
+ return 1;
+}
+
+static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+ u32 utlset1;
+ u32 timeout;
+
+ /*
+ * Do a software reset on PCIe ports.
+ * This code is to fix the issue that pci drivers doesn't re-assign
+ * bus number for PCIE devices after Uboot
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+ * PT quad port, SAS LSI 1064E)
+ */
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST + (port->index * 0x55), 0x0);
+ mdelay(10);
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x00000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+
+ switch (port->index) {
+ case 0:
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+ mdelay(50);
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+ break;
+
+ case 1:
+ mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST, 0x10000000);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ timeout = 0;
+ while ((!(mfdcri(SDR0, PESDR0_460EX_RSTSTA +
+ (port->index * 0x55)) & 0x1)) &&
+ (timeout < PCIE_PHY_RESET_TIMEOUT)) {
+ udelay(10);
+ timeout++;
+ }
+
+ if (timeout < PCIE_PHY_RESET_TIMEOUT) {
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return 0;
+ } else {
+ printk(KERN_INFO "PCIE: Can't reset PHY\n");
+ return -1;
+ }
+}
+
+static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = {
+ .core_init = apm821xx_pciex_core_init,
+ .port_init_hw = apm821xx_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+};
+
static int __init ppc460sx_pciex_core_init(struct device_node *np)
{
/* HSS drive amplitude */
@@ -1304,6 +1407,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
+ ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
@@ -1751,9 +1856,9 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
* if it works
*/
out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008); /* Moving on HB */
out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c); /* Moving on HB */
out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 32ce763..faf3017 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -441,6 +441,7 @@
/*
* Config space register offsets
*/
+#define PECFG_ECDEVCTL 0x060
#define PECFG_ECRTCTL 0x074
#define PECFG_BAR0LMPA 0x210
@@ -448,6 +449,7 @@
#define PECFG_BAR1MPA 0x218
#define PECFG_BAR2LMPA 0x220
#define PECFG_BAR2HMPA 0x224
+#define PECFG_ECDEVCAPPA 0x25c
#define PECFG_PIMEN 0x33c
#define PECFG_PIM0LAL 0x340
@@ -494,5 +496,7 @@ enum
LNKW_X8 = 0x8
};
+/* Timout for reset phy */
+#define PCIE_PHY_RESET_TIMEOUT 10
#endif /* __PPC4XX_PCI_H__ */
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/