Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches tobasic_mmio_gpio

[Tony Lindgren]

* Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> [111219 16:28]:
> On Tuesday 20 of December 2011 at 01:06:00, Tony Lindgren wrote:
> > 
> > This part especially looks like it really should be just a regular
> > device driver under drivers/ somewhere. 
> 
> I really don't understand what kind of a driver you might mean here.
> 
> The latch_gpios[] table is initially filled with all latch1 and latch2 
> GPIO pins in order to register and initialize them from the board file 
> until they are handled by respective existing device drivers (leds, 
> nand, lcd, serio, serial8250, asoc) instead of those drivers accessing 
> the latches with those old ams_delta_latch[12]_write() functions. That 
> table will get almost empty after the transision process is completed, 
> holding only pins not used by any drivers / connected to unsued devices, 
> in order to initialize them from the board file for power saving 
> purposes. A separate driver for the purpose of initializing a few GPIO 
> pins seems an overkill.

OK maybe update the comments a bit to describe how that table will
mostly disappear? It's not obvious from glancing over this patch
series :)
 
> The new ams_delta_latch_write() function is a unified replacement for 
> those removed ams_delta_latch[12]_write(), and serves as a temporary 
> wrapper over gpio_set_value(), providing the old API for those not yet 
> updated device drivers, and will be removed after all drivers are 
> converted.
> 
> Perhaps I was not clear enough with my intention of a smooth step by 
> step transition to the GPIO API without breaking any signle driver with 
> any single patch.
> 
> > That might simplify things quite a bit for you..
> 
> Will be simplified, step by step, while moving GPIO handling from the 
> board file to all those existing device drivers.
> 
> I hope this clarifies things enough.

Yes thanks :)

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/