Re: [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:50 Fri 02 Dec     , Nicolas Ferre wrote:
> Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and
> enable it in at91sam9m10g45ek board device tree file.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/at91sam9g45.dtsi     |    7 +++++++
>  arch/arm/boot/dts/at91sam9m10g45ek.dts |    6 ++++++
>  2 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index e89b1d7..67f94d3 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -101,6 +101,13 @@
>  				atmel,use-dma-tx;
>  				status = "disabled";
>  			};
> +
> +			macb0: ethernet@fffbc000 {
> +				compatible = "cdns,at32ap7000-macb", "cdns,macb";
> +				reg = <0xfffbc000 0x100>;
> +				interrupts = <25 4>;
why?
> +				status = "disabled";
> +			};
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index 85b34f5..17377a2 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -30,6 +30,12 @@
>  			usart1: serial@fff90000 {
>  				status = "okay";
>  			};
> +
> +			macb0: ethernet@fffbc000 {
> +				local-mac-address = [3a 0e 03 04 05 06];
please drop this is not supposed to be in the dts but updated for each board

Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/