Re: [PATCH] iommu: Include MSI susceptibility to DMA in creatingiommu groups

[Kai Huang]

On Fri, Nov 18, 2011 at 1:09 AM, Alex Williamson
<alex.williamson@xxxxxxxxxx> wrote:
> IOMMU drivers should account for the platform's susceptibility to
> DMA triggered MSI interrupts in creating IOMMU groups.  Skip
> devices when the IOMMU can't isolate MSI from DMA, but allow
> an iommu=group_unsafe_msi option for opt-in.  This removes the
> leap in logic for users that IOMMU_CAP_INTR_REMAP is required for
> interrupt security when they may be running on a non-x86 platform
> that does not have this dependency.
>
> Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> ---
>
>  Documentation/kernel-parameters.txt |    9 ++++++---
>  arch/ia64/include/asm/iommu.h       |    2 ++
>  arch/ia64/kernel/pci-dma.c          |    1 +
>  arch/x86/include/asm/iommu.h        |    1 +
>  arch/x86/kernel/pci-dma.c           |   12 ++++++++++++
>  drivers/iommu/amd_iommu.c           |    7 +++++++
>  drivers/iommu/intel-iommu.c         |    7 +++++++
>  7 files changed, 36 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index 9d5ac6c..ffa43b7 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -1059,9 +1059,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>                nomerge
>                forcesac
>                soft
> -               pt              [x86, IA-64]
> -               group_mf        [x86, IA-64]
> -
> +               pt                      [x86, IA-64]
> +               group_mf                [x86, IA-64]
> +                       Group multifunction devices together in IOMMU API.
> +               group_unsafe_msi        [x86, IA-64]
> +                       Allow grouping of devices even when the platfom
> +                       does not provide MSI isolation in IOMMU API.
>
>        io7=            [HW] IO7 for Marvel based alpha systems
>                        See comment before marvel_specify_io7 in
> diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
> index b6a809f..b726572 100644
> --- a/arch/ia64/include/asm/iommu.h
> +++ b/arch/ia64/include/asm/iommu.h
> @@ -12,11 +12,13 @@ extern int force_iommu, no_iommu;
>  extern int iommu_pass_through;
>  extern int iommu_detected;
>  extern int iommu_group_mf;
> +extern int iommu_group_unsafe_msi;
>  #else
>  #define iommu_pass_through     (0)
>  #define no_iommu               (1)
>  #define iommu_detected         (0)
>  #define iommu_group_mf         (0)
> +#define iommu_group_unsafe_msi (0)
>  #endif
>  extern void iommu_dma_init(void);
>  extern void machvec_init(const char *name);
> diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
> index eb11757..63721ce 100644
> --- a/arch/ia64/kernel/pci-dma.c
> +++ b/arch/ia64/kernel/pci-dma.c
> @@ -34,6 +34,7 @@ int force_iommu __read_mostly;
>
>  int iommu_pass_through;
>  int iommu_group_mf;
> +int iommu_group_unsafe_msi;
>
>  /* Dummy device used for NULL arguments (normally ISA). Better would
>    be probably a smaller DMA mask, but this is bug-to-bug compatible
> diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
> index dffc38e..e3d289c 100644
> --- a/arch/x86/include/asm/iommu.h
> +++ b/arch/x86/include/asm/iommu.h
> @@ -6,6 +6,7 @@ extern int force_iommu, no_iommu;
>  extern int iommu_detected;
>  extern int iommu_pass_through;
>  extern int iommu_group_mf;
> +extern int iommu_group_unsafe_msi;
>
>  /* 10 seconds */
>  #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
> diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
> index 1c4d769..80eb6b6 100644
> --- a/arch/x86/kernel/pci-dma.c
> +++ b/arch/x86/kernel/pci-dma.c
> @@ -54,6 +54,16 @@ int iommu_pass_through __read_mostly;
>  */
>  int iommu_group_mf __read_mostly;
>
> +/*
> + * For the iommu_device_group interface, we not only need to be concerned
> + * with DMA isolation between devices, but also DMA isolation that could
> + * affect the platform, including MSI isolation.  If a platform is
> + * susceptible to malicious DMA writes triggering MSI interrupts, the
> + * IOMMU driver can't reasonably group devices.  This allows the iommu
> + * driver to ignore MSI isolation when creating groups.
> + */
> +int iommu_group_unsafe_msi __read_mostly;
> +
>  extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
>
>  /* Dummy device used for NULL arguments (normally ISA). */
> @@ -180,6 +190,8 @@ static __init int iommu_setup(char *p)
>                        iommu_pass_through = 1;
>                if (!strncmp(p, "group_mf", 8))
>                        iommu_group_mf = 1;
> +               if (!strncmp(p, "group_unsafe_msi", 16))
> +                       iommu_group_unsafe_msi = 1;
>
>                gart_parse_options(p);
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index ad074dc..5f55e7a 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -2794,6 +2794,13 @@ static int amd_iommu_device_group(struct device *dev, unsigned int *groupid)
>        struct pci_dev *pdev = to_pci_dev(dev);
>        u16 devid;
>
> +       if (!iommu_group_unsafe_msi) {
> +               printk_once(KERN_NOTICE "%s: "
> +                           "IOMMU device group disabled without interrupt remapping support",
> +                           pci_bus_type.name);
> +               return -ENODEV;
> +       }
> +
>        if (!dev_data)
>                return -ENODEV;
>
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index e918f72..f3fcd69 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -4094,6 +4094,13 @@ static int intel_iommu_device_group(struct device *dev, unsigned int *groupid)
>                u32 group;
>        } id;
>
> +       if (!intr_remapping_enabled && !iommu_group_unsafe_msi) {
> +               printk_once(KERN_NOTICE "%s: "
> +                           "IOMMU device group disabled without interrupt remapping support",
> +                           pci_bus_type.name);
> +               return -ENODEV;
> +       }
> +

When intr_remapping_enabled == 0 and iommu_group_unsafe_msi == 1, is
it better to add an print msg that notice user we enabled the group by
allowing unsafe msi but without hardware interrupt remapping support?
Or have we added such msg at some other place?

-cody

>        if (iommu_no_mapping(dev))
>                return -ENODEV;
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/