Re: [PATCH 2/2] Initial support for the Ubiquiti Networks XM board.

[Gabor Juhos]

Hi Rene,

> Signed-off-by: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
> ---
>  arch/mips/ath79/Kconfig        |   12 ++++
>  arch/mips/ath79/Makefile       |    1 +
>  arch/mips/ath79/Platform       |    7 ++-
>  arch/mips/ath79/mach-ubnt-xm.c |  110 ++++++++++++++++++++++++++++++++++++++++
>  arch/mips/ath79/machtypes.h    |    1 +
>  5 files changed, 128 insertions(+), 3 deletions(-)
>  create mode 100644 arch/mips/ath79/mach-ubnt-xm.c
> 
> diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
> index 4770741..fa74e73 100644
> --- a/arch/mips/ath79/Kconfig
> +++ b/arch/mips/ath79/Kconfig
> @@ -23,6 +23,16 @@ config ATH79_MACH_PB44
>  	  Say 'Y' here if you want your kernel to support the
>  	  Atheros PB44 reference board.
>  
> +config ATH79_MACH_UBNT_XM
> +	bool "Ubiquiti Networks XM board"
> +	select SOC_AR724X
> +	select ATH79_DEV_GPIO_BUTTONS
> +	select ATH79_DEV_LEDS_GPIO
> +	select ATH79_DEV_SPI
> +	help
> +	  Say 'Y' here if you want your kernel to support the
> +	  Ubiquiti Networks XM board.
> +
>  endmenu
>  
>  config SOC_AR71XX
> @@ -33,6 +43,8 @@ config SOC_AR71XX
>  config SOC_AR724X
>  	select USB_ARCH_HAS_EHCI
>  	select USB_ARCH_HAS_OHCI
> +	select HW_HAS_PCI
> +	select PCI

Please don't select the whole PCI subsystem. Even if the hardware has PCI
support, not everyone wants to build a kernel with PCI support.

>  	def_bool n
>  
>  config SOC_AR913X
> diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
> index c33d465..ac9f375 100644
> --- a/arch/mips/ath79/Makefile
> +++ b/arch/mips/ath79/Makefile
> @@ -26,3 +26,4 @@ obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
>  #
>  obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
>  obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
> +obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
> diff --git a/arch/mips/ath79/Platform b/arch/mips/ath79/Platform
> index 2bd6636..aca7ab1 100644
> --- a/arch/mips/ath79/Platform
> +++ b/arch/mips/ath79/Platform
> @@ -2,6 +2,7 @@
>  # Atheros AR71xx/AR724x/AR913x
>  #
>  
> -platform-$(CONFIG_ATH79)	+= ath79/
> -cflags-$(CONFIG_ATH79)		+= -I$(srctree)/arch/mips/include/asm/mach-ath79
> -load-$(CONFIG_ATH79)		= 0xffffffff80060000
> +platform-$(CONFIG_ATH79)		+= ath79/
> +cflags-$(CONFIG_ATH79)			+= -I$(srctree)/arch/mips/include/asm/mach-ath79
> +load-$(CONFIG_ATH79)			= 0xffffffff80060000
> +load-$(CONFIG_ATH79_MACH_UBNT_XM)	= 0xffffffff80002000

Please don't add another load address here.The ath79 platform code has been
designed in a way which allows a single kernel image to run on all
AR71xx/AR724x/AR913X/AR933x based boards, and the 0x80060000 load address has
been chosen due to compatibility reasons. It allows to boot the kernel on older
boards which are using RedBoot as the bootloader. The U-Boot on the
AR724x/AR933x based boards can load the kernel to 0x8006000.

> diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c
> new file mode 100644
> index 0000000..150a0a0
> --- /dev/null
> +++ b/arch/mips/ath79/mach-ubnt-xm.c
> @@ -0,0 +1,110 @@
> +/*
> + *  Ubiquiti Networks XM board support
> + *
> + *  Copyright (C) 2011 Renà Bolldorf <xsecute@xxxxxxxxxxxxxx>
> + *
> + *  Derived from: mach-pb44.c
> + *
> + *  This program is free software; you can redistribute it and/or modify it
> + *  under the terms of the GNU General Public License version 2 as published
> + *  by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/pci.h>
> +#include <linux/ath9k_platform.h>
> +
> +#include "machtypes.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-spi.h"
> +
> +#define UBNT_XM_GPIO_LED_L1		0
> +#define UBNT_XM_GPIO_LED_L2		1
> +#define UBNT_XM_GPIO_LED_L3		11
> +#define UBNT_XM_GPIO_LED_L4		7
> +
> +#define UBNT_XM_GPIO_BTN_RESET		12
> +
> +#define UBNT_XM_KEYS_POLL_INTERVAL	20
> +#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
> +
> +#define UBNT_XM_PCI_IRQ			48
> +#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
> +
> +static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
> +	{
> +		.name		= "signal:poor",
> +		.gpio		= UBNT_XM_GPIO_LED_L1,
> +		.active_low	= 0,
> +	}, {
> +		.name		= "signal:bad",
> +		.gpio		= UBNT_XM_GPIO_LED_L2,
> +		.active_low	= 0,
> +	}, {
> +		.name		= "signal:good",
> +		.gpio		= UBNT_XM_GPIO_LED_L3,
> +		.active_low	= 0,
> +	}, {
> +		.name		= "signal:excellent",
> +		.gpio		= UBNT_XM_GPIO_LED_L4,
> +		.active_low	= 0,
> +	},

The LED names should follow the Linux LED Device Naming convention.
See Documentation/leds/leds-class.txt.

> +};
> +
> +static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
> +	{
> +		.desc		= "reset",
> +		.type		= EV_KEY,
> +		.code		= KEY_RESTART,
> +		.debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
> +		.gpio		= UBNT_XM_GPIO_BTN_RESET,
> +		.active_low	= 1,
> +	}
> +};
> +
> +static struct spi_board_info ubnt_xm_spi_info[] = {
> +	{
> +		.bus_num	= 0,
> +		.chip_select	= 0,
> +		.max_speed_hz	= 25000000,
> +		.modalias	= "mx25l6405d",
> +	}
> +};
> +
> +static struct ath79_spi_platform_data ubnt_xm_spi_data = {
> +	.bus_num		= 0,
> +	.num_chipselect		= 1,
> +};
> +
> +static struct ath9k_platform_data ubnt_xm_eeprom_data;
> +
> +int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
> +{
> +	return UBNT_XM_PCI_IRQ;
> +}
> +
> +int pcibios_plat_dev_init(struct pci_dev *dev)
> +{
> +	dev->dev.platform_data = &ubnt_xm_eeprom_data;
> +
> +	return 0;
> +}

The 'pci_bios_map_irq' and 'pcibios_plat_dev_init' functions are global, so you
can have only one instance of them within the kernel. Adding these functions
into a machine specific file would prevent to build a kernel which supports
multiple different boards.

> +
> +static void __init ubnt_xm_init(void)
> +{
> +	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
> +				 ubnt_xm_leds_gpio);

The Ubiquiti xM family has several different models. Registering all of these
LEDs on every XM board makes no sense, the number of the LEDs and the assigned
GPIO lines varies between the different boards.

> +
> +	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
> +					ARRAY_SIZE(ubnt_xm_gpio_keys),
> +					ubnt_xm_gpio_keys);
> +
> +	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
> +			   ARRAY_SIZE(ubnt_xm_spi_info));
> +
> +	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
> +	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_UBNT_XM, "UBNT-XM", "Ubiquiti Networks XM board", ubnt_xm_init);
> diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
> index 3940fe4..1bb0747 100644
> --- a/arch/mips/ath79/machtypes.h
> +++ b/arch/mips/ath79/machtypes.h
> @@ -18,6 +18,7 @@ enum ath79_mach_type {
>  	ATH79_MACH_GENERIC = 0,
>  	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
>  	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
> +	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board */
>  };
>  
>  #endif /* _ATH79_MACHTYPE_H */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/