[PATCH 0/8] serial: 8250: support hw-based RS485 direction control (finally!)

[Wolfram Sang]

Some 8250-variants control the direction pin for RS485 in hardware. Linux has
RS485 support these days, so update the 8250-driver to adhere to that. There
have been attempts for mainlining this before. So, I started with the version
from Matthias which got no further comments, a proof-of-concept for the 16V2750
from JÃrgen, and reworked it to match the current state of RS485 in Linux. Some
minor cleanup patches came along the way. Really looking forward to
comments/tags, because I think it is really time to get this functionality into
mainline once and for all ;)

Code is based on 3.2-rc2, tested on a OMAP-based custom board with a 16V2750.
A git tree can be found here:

	git://git.pengutronix.de/git/wsa/linux-2.6.git 8250_rs485

Thanks and regards,

   Wolfram

Matthias Fuchs (1):
  serial: 8250: Add ioctl to enable auto rs485 mode with some Exar UARTs

Wolfram Sang (7):
  serial: 8250: replace hardcoded 0xbf with #define
  serial: 8250: save rs485_flags per instance
  serial: 8250: add RX_DURING_TX capability to RS485 mode
  serial: 8250: reject delaying RTS with RS485
  serial: 8250: update rs485 flags with polarity settings
  serial: 8250: add Exar 16V2750 support
  serial: 8250: fix comment about accessing EMSR

 drivers/tty/serial/8250.c   |  143 +++++++++++++++++++++++++++++++++++++++---
 include/linux/serial_core.h |    3 +-
 include/linux/serial_reg.h  |    4 +-
 3 files changed, 137 insertions(+), 13 deletions(-)

-- 
1.7.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/