Re: [PATCH 2/5 v14] arm: omap: usb: ehci and ohci hwmod structuresfor omap3

From: Munegowda, Keshava
Date: Fri Oct 14 2011 - 04:04:21 EST


On Fri, Oct 14, 2011 at 6:33 AM, Paul Walmsley <paul@xxxxxxxxx> wrote:
>
> Hi
>
> I probably shouldn't have, but I've gone ahead and fixed a bunch of issues
> with this patch locally.  Modified patch below.  Please give it a test and
> ensure that it works for you.
>
>
> - Paul
>
> From: Keshava Munegowda <keshava_mgowda@xxxxxx>
> Date: Thu, 13 Oct 2011 17:27:28 -0600
> Subject: [PATCH] ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
>
> Following 2 hwmod structures are added
>    1. usb_host_hs
>         The hwmod of usbhs with uhh, ehci and ohci base addresses
>         functional clock and ehci, ohci irqs
>
>    2. usb_tll_hs
>          hwmod of usbhs with the TLL base address and irq.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
> Reviewed-by: Partha Basak <parthab@xxxxxxxxxxxx>
> [paul@xxxxxxxxx: fixed whitespace; removed nonexistent TLL->L4 CORE interface;
>  added master & slave for L4 CORE->TLL interface; skip registration on
>  3430ES1; fixed multiline comment style; updated to apply on Tony's cleanup
>  branch]
> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> ---
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |  221 ++++++++++++++++++++++++++++
>  1 files changed, 221 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index ab35acb..060543e 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
>  static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
>  static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
>  static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
> +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
> +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
>
>  /* L3 -> L4_CORE interface */
>  static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
> @@ -3123,6 +3125,218 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
>        .class          = &omap34xx_mmc_class,
>  };
>
> +/*
> + * 'usb_host_hs' class
> + * high-speed multi-port usb host controller
> + */
> +static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
> +       .master         = &omap3xxx_usb_host_hs_hwmod,
> +       .slave          = &omap3xxx_l3_main_hwmod,
> +       .clk            = "core_l3_ick",
> +       .user           = OCP_USER_MPU,
> +};
> +
> +static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
> +       .rev_offs       = 0x0000,
> +       .sysc_offs      = 0x0010,
> +       .syss_offs      = 0x0014,
> +       .sysc_flags     = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
> +                          SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
> +                          SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
> +       .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> +                          MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
> +       .sysc_fields    = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
> +       .name = "usb_host_hs",
> +       .sysc = &omap3xxx_usb_host_hs_sysc,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
> +       &omap3xxx_usb_host_hs__l3_main_2,
> +};
> +
> +static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
> +       {
> +               .name           = "uhh",
> +               .pa_start       = 0x48064000,
> +               .pa_end         = 0x480643ff,
> +               .flags          = ADDR_TYPE_RT
> +       },
> +       {
> +               .name           = "ohci",
> +               .pa_start       = 0x48064400,
> +               .pa_end         = 0x480647ff,
> +       },
> +       {
> +               .name           = "ehci",
> +               .pa_start       = 0x48064800,
> +               .pa_end         = 0x48064cff,
> +       },
> +       {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
> +       .master         = &omap3xxx_l4_core_hwmod,
> +       .slave          = &omap3xxx_usb_host_hs_hwmod,
> +       .clk            = "usbhost_ick",
> +       .addr           = omap3xxx_usb_host_hs_addrs,
> +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
> +       &omap3xxx_l4_core__usb_host_hs,
> +};
> +
> +static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
> +         { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
> +};
> +
> +static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
> +       { .name = "ohci-irq", .irq = 76 },
> +       { .name = "ehci-irq", .irq = 77 },
> +       { .irq = -1 }
> +};
> +
> +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
> +       .name           = "usb_host_hs",
> +       .class          = &omap3xxx_usb_host_hs_hwmod_class,
> +       .clkdm_name     = "l3_init_clkdm",
> +       .mpu_irqs       = omap3xxx_usb_host_hs_irqs,
> +       .main_clk       = "usbhost_48m_fck",
> +       .prcm = {
> +               .omap2 = {
> +                       .module_offs = OMAP3430ES2_USBHOST_MOD,
> +                       .prcm_reg_id = 1,
> +                       .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
> +                       .idlest_reg_id = 1,
> +                       .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
> +                       .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
> +               },
> +       },
> +       .opt_clks       = omap3xxx_usb_host_hs_opt_clks,
> +       .opt_clks_cnt   = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
> +       .slaves         = omap3xxx_usb_host_hs_slaves,
> +       .slaves_cnt     = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
> +       .masters        = omap3xxx_usb_host_hs_masters,
> +       .masters_cnt    = ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
> +
> +       /*
> +        * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
> +        * id: i660
> +        *
> +        * Description:
> +        * In the following configuration :
> +        * - USBHOST module is set to smart-idle mode
> +        * - PRCM asserts idle_req to the USBHOST module ( This typically
> +        *   happens when the system is going to a low power mode : all ports
> +        *   have been suspended, the master part of the USBHOST module has
> +        *   entered the standby state, and SW has cut the functional clocks)
> +        * - an USBHOST interrupt occurs before the module is able to answer
> +        *   idle_ack, typically a remote wakeup IRQ.
> +        * Then the USB HOST module will enter a deadlock situation where it
> +        * is no more accessible nor functional.
> +        *
> +        * Workaround:
> +        * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
> +        */
> +
> +       /*
> +        * Errata: USB host EHCI may stall when entering smart-standby mode
> +        * Id: i571
> +        *
> +        * Description:
> +        * When the USBHOST module is set to smart-standby mode, and when it is
> +        * ready to enter the standby state (i.e. all ports are suspended and
> +        * all attached devices are in suspend mode), then it can wrongly assert
> +        * the Mstandby signal too early while there are still some residual OCP
> +        * transactions ongoing. If this condition occurs, the internal state
> +        * machine may go to an undefined state and the USB link may be stuck
> +        * upon the next resume.
> +        *
> +        * Workaround:
> +        * Don't use smart standby; use only force standby,
> +        * hence HWMOD_SWSUP_MSTANDBY
> +        */
> +
> +       /*
> +        * During system boot; If the hwmod framework resets the module
> +        * the module will have smart idle settings; which can lead to deadlock
> +        * (above Errata Id:i660); so, dont reset the module during boot;
> +        * Use HWMOD_INIT_NO_RESET.
> +        */
> +
> +       .flags          = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
> +                         HWMOD_INIT_NO_RESET,
> +};
> +
> +/*
> + * 'usb_tll_hs' class
> + * usb_tll_hs module is the adapter on the usb_host_hs ports
> + */
> +static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
> +       .rev_offs       = 0x0000,
> +       .sysc_offs      = 0x0010,
> +       .syss_offs      = 0x0014,
> +       .sysc_flags     = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
> +                          SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
> +                          SYSC_HAS_AUTOIDLE),
> +       .idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> +       .sysc_fields    = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
> +       .name = "usb_tll_hs",
> +       .sysc = &omap3xxx_usb_tll_hs_sysc,
> +};
> +
> +static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
> +       { .name = "tll-irq", .irq = 78 },
> +       { .irq = -1 }
> +};
> +
> +static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
> +       {
> +               .name           = "tll",
> +               .pa_start       = 0x48062000,
> +               .pa_end         = 0x48062fff,
> +               .flags          = ADDR_TYPE_RT
> +       },
> +       {}
> +};
> +
> +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
> +       .master         = &omap3xxx_l4_core_hwmod,
> +       .slave          = &omap3xxx_usb_tll_hs_hwmod,
> +       .clk            = "usbtll_ick",
> +       .addr           = omap3xxx_usb_tll_hs_addrs,
> +       .user           = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
> +       &omap3xxx_l4_core__usb_tll_hs,
> +};
> +
> +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
> +       .name           = "usb_tll_hs",
> +       .class          = &omap3xxx_usb_tll_hs_hwmod_class,
> +       .clkdm_name     = "l3_init_clkdm",
> +       .mpu_irqs       = omap3xxx_usb_tll_hs_irqs,
> +       .main_clk       = "usbtll_fck",
> +       .prcm = {
> +               .omap2 = {
> +                       .module_offs = CORE_MOD,
> +                       .prcm_reg_id = 3,
> +                       .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
> +                       .idlest_reg_id = 3,
> +                       .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
> +               },
> +       },
> +       .slaves         = omap3xxx_usb_tll_hs_slaves,
> +       .slaves_cnt     = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
> +};
> +
>  static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
>        &omap3xxx_l3_main_hwmod,
>        &omap3xxx_l4_core_hwmod,
> @@ -3151,6 +3365,7 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
>        &omap3xxx_uart1_hwmod,
>        &omap3xxx_uart2_hwmod,
>        &omap3xxx_uart3_hwmod,
> +

why you have removed &omap3xxx_usb_host_hs_hwmod,
and &omap3xxx_usb_tll_hs_hwmod.?

I think it is required here, please let me know.

regards
keshava




>        /* dss class */
>        &omap3xxx_dss_dispc_hwmod,
>        &omap3xxx_dss_dsi1_hwmod,
> @@ -3206,6 +3421,8 @@ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
>  static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
>        &omap3xxx_dss_core_hwmod,
>        &omap3xxx_usbhsotg_hwmod,
> +       &omap3xxx_usb_host_hs_hwmod,
> +       &omap3xxx_usb_tll_hs_hwmod,
>        NULL
>  };
>
> @@ -3223,12 +3440,16 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
>        &omap36xx_sr1_hwmod,
>        &omap36xx_sr2_hwmod,
>        &omap3xxx_usbhsotg_hwmod,
> +       &omap3xxx_usb_host_hs_hwmod,
> +       &omap3xxx_usb_tll_hs_hwmod,
>        NULL
>  };
>
>  static __initdata struct omap_hwmod *am35xx_hwmods[] = {
>        &omap3xxx_dss_core_hwmod, /* XXX ??? */
>        &am35xx_usbhsotg_hwmod,
> +       &omap3xxx_usb_host_hs_hwmod,
> +       &omap3xxx_usb_tll_hs_hwmod,
>        NULL
>  };
>
> --
> 1.7.7
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/