[PATCH 2/2] ASoC: wm8991: Use snd_soc_update_bits forread-modify-write

[Axel Lin]

Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
---
 sound/soc/codecs/wm8991.c |   20 +++++++++-----------
 1 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 708d251..c9ab3ba 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -1264,7 +1264,6 @@ static int wm8991_probe(struct snd_soc_codec *codec)
 {
 	struct wm8991_priv *wm8991;
 	int ret;
-	unsigned int reg;
 
 	wm8991 = snd_soc_codec_get_drvdata(codec);
 
@@ -1282,19 +1281,18 @@ static int wm8991_probe(struct snd_soc_codec *codec)
 
 	wm8991_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	reg = snd_soc_read(codec, WM8991_AUDIO_INTERFACE_4);
-	snd_soc_write(codec, WM8991_AUDIO_INTERFACE_4, reg | WM8991_ALRCGPIO1);
+	snd_soc_update_bits(codec, WM8991_AUDIO_INTERFACE_4,
+			    WM8991_ALRCGPIO1, WM8991_ALRCGPIO1);
 
-	reg = snd_soc_read(codec, WM8991_GPIO1_GPIO2) &
-	      ~WM8991_GPIO1_SEL_MASK;
-	snd_soc_write(codec, WM8991_GPIO1_GPIO2, reg | 1);
+	snd_soc_update_bits(codec, WM8991_GPIO1_GPIO2,
+			    WM8991_GPIO1_SEL_MASK, 1);
 
-	reg = snd_soc_read(codec, WM8991_POWER_MANAGEMENT_1);
-	snd_soc_write(codec, WM8991_POWER_MANAGEMENT_1, reg | WM8991_VREF_ENA|
-		      WM8991_VMID_MODE_MASK);
+	snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_1,
+			    WM8991_VREF_ENA | WM8991_VMID_MODE_MASK,
+			    WM8991_VREF_ENA | WM8991_VMID_MODE_MASK);
 
-	reg = snd_soc_read(codec, WM8991_POWER_MANAGEMENT_2);
-	snd_soc_write(codec, WM8991_POWER_MANAGEMENT_2, reg | WM8991_OPCLK_ENA);
+	snd_soc_update_bits(codec, WM8991_POWER_MANAGEMENT_2,
+			    WM8991_OPCLK_ENA, WM8991_OPCLK_ENA);
 
 	snd_soc_write(codec, WM8991_DAC_CTRL, 0);
 	snd_soc_write(codec, WM8991_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
-- 
1.7.4.1



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/