[12/38] lis3: fix regression of HP DriveGuard with 8bit chip

[Greg KH]

3.0-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Takashi Iwai <tiwai@xxxxxxx>

commit 05faadcf59507e8eea57ffbeea9cbb14c9a2ab3d upstream.

Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.

Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
Cc: Eric Piel <eric.piel@xxxxxxxxxxxxxxxx>
Cc: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxx>
Signed-off-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/misc/lis3lv02d/lis3lv02d.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d
 	 *      both have been read. So the value read will always be correct.
 	 * Set BOOT bit to refresh factory tuning values.
 	 */
-	lis3->read(lis3, CTRL_REG2, &reg);
-	if (lis3->whoami ==  WAI_12B)
-		reg |= CTRL2_BDU | CTRL2_BOOT;
-	else
-		reg |= CTRL2_BOOT_8B;
-	lis3->write(lis3, CTRL_REG2, reg);
+	if (lis3->pdata) {
+		lis3->read(lis3, CTRL_REG2, &reg);
+		if (lis3->whoami ==  WAI_12B)
+			reg |= CTRL2_BDU | CTRL2_BOOT;
+		else
+			reg |= CTRL2_BOOT_8B;
+		lis3->write(lis3, CTRL_REG2, reg);
+	}
 
 	/* LIS3 power on delay is quite long */
 	msleep(lis3->pwron_delay / lis3lv02d_get_odr());


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/