Re: [PATCH 2/2] pinmux: add a driver for the U300 pinmux

[Barry Song]

2011/10/3 Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>:
> From: Linus Walleij <linus.walleij@xxxxxxxxxx>
>
> This adds a driver for the U300 pinmux portions of the system
> controller "SYSCON". It also serves as an example of how to use
> the pinmux subsystem. This driver also houses the platform data
> for the only supported platform.
>
> This deletes the old U300 driver in arch/arm/mach-u300 and
> replace it with a driver using the new subsystem.
>
> The new driver is considerably fatter than the old one, but it
> also registers all 467 pins of the system and adds the power
> and EMIF pin groups and corresponding functions. The idea
> is to use this driver as a a reference for other
> implementation so it needs to be as complete and verbose
> as possible.
>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> ChangeLog v7->v9:
>
> - Use devm_kzalloc()/devm_kfree() to allocate memory
>
> - Merge the pinmux-u300.h header file into the the driver
> Âfile.
> ---
> Âarch/arm/mach-u300/Kconfig        |  Â2 +
> Âarch/arm/mach-u300/Makefile       Â|  Â2 +-
> Âarch/arm/mach-u300/core.c        Â|  84 +++-
> Âarch/arm/mach-u300/include/mach/syscon.h | Â136 ----
> Âarch/arm/mach-u300/mmc.c         |  16 -
> Âarch/arm/mach-u300/padmux.c       Â| Â367 ----------
> Âarch/arm/mach-u300/padmux.h       Â|  39 -
> Âarch/arm/mach-u300/spi.c         |  20 -
> Âdrivers/pinctrl/Kconfig         Â|  Â7 +
> Âdrivers/pinctrl/Makefile         |  Â1 +
> Âdrivers/pinctrl/pinmux-u300.c      Â| 1148 ++++++++++++++++++++++++++++++
> Â11 files changed, 1241 insertions(+), 581 deletions(-)
> Âdelete mode 100644 arch/arm/mach-u300/padmux.c
> Âdelete mode 100644 arch/arm/mach-u300/padmux.h
> Âcreate mode 100644 drivers/pinctrl/pinmux-u300.c
>
> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
> index 32a7b0f..449fd6a 100644
> --- a/arch/arm/mach-u300/Kconfig
> +++ b/arch/arm/mach-u300/Kconfig
> @@ -6,6 +6,8 @@ comment "ST-Ericsson Mobile Platform Products"
>
> Âconfig MACH_U300
> Â Â Â Âbool "U300"
> + Â Â Â select PINCTRL
> + Â Â Â select PINMUX_U300
>
> Âcomment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
>
> diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
> index 8fd354a..2855381 100644
> --- a/arch/arm/mach-u300/Makefile
> +++ b/arch/arm/mach-u300/Makefile
> @@ -2,7 +2,7 @@
> Â# Makefile for the linux kernel, U300 machine.
> Â#
>
> -obj-y     Â:= core.o clock.o timer.o padmux.o
> +obj-y     Â:= core.o clock.o timer.o
> Âobj-m     Â:=
> Âobj-n     Â:=
> Âobj- Â Â Â Â Â :=
> diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
> index 399c89f..2f5929b 100644
> --- a/arch/arm/mach-u300/core.c
> +++ b/arch/arm/mach-u300/core.c
> @@ -25,6 +25,8 @@
> Â#include <linux/err.h>
> Â#include <linux/mtd/nand.h>
> Â#include <linux/mtd/fsmc.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinmux.h>
>
> Â#include <asm/types.h>
> Â#include <asm/setup.h>
> @@ -1535,6 +1537,14 @@ static struct coh901318_platform coh901318_platform = {
> Â Â Â Â.max_channels = U300_DMA_CHANNELS,
> Â};
>
> +static struct resource pinmux_resources[] = {
> + Â Â Â {
> + Â Â Â Â Â Â Â .start = U300_SYSCON_BASE,
> +        .end  = U300_SYSCON_BASE + SZ_4K - 1,
> + Â Â Â Â Â Â Â .flags = IORESOURCE_MEM,
> + Â Â Â },
> +};
> +
> Âstatic struct platform_device wdog_device = {
> Â Â Â Â.name = "coh901327_wdog",
> Â Â Â Â.id = -1,
> @@ -1630,6 +1640,72 @@ static struct platform_device dma_device = {
> Â Â Â Â},
> Â};
>
> +static struct platform_device pinmux_device = {
> + Â Â Â .name = "pinmux-u300",
> + Â Â Â .id = -1,
> + Â Â Â .num_resources = ARRAY_SIZE(pinmux_resources),
> + Â Â Â .resource = pinmux_resources,
> +};
> +
> +/* Pinmux settings */
> +static struct pinmux_map u300_pinmux_map[] = {
> + Â Â Â /* anonymous maps for chip power and EMIFs */
> + Â Â Â PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"),
> + Â Â Â PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"),
> + Â Â Â PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"),
> + Â Â Â /* per-device maps for MMC/SD, SPI and UART */
> + Â Â Â PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"),
> + Â Â Â PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"),
> + Â Â Â PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"),
> +};
> +
> +struct u300_mux_hog {
> + Â Â Â const char *name;
> + Â Â Â struct device *dev;
> + Â Â Â struct pinmux *pmx;
> +};
> +
> +static struct u300_mux_hog u300_mux_hogs[] = {
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "uart0",
> + Â Â Â Â Â Â Â .dev = &uart0_device.dev,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "spi0",
> + Â Â Â Â Â Â Â .dev = &pl022_device.dev,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "mmc0",
> + Â Â Â Â Â Â Â .dev = &mmcsd_device.dev,
> + Â Â Â },
> +};
> +
> +static int __init u300_pinmux_fetch(void)
> +{
> + Â Â Â int i;
> +
> + Â Â Â for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
> + Â Â Â Â Â Â Â struct pinmux *pmx;
> + Â Â Â Â Â Â Â int ret;
> +
> + Â Â Â Â Â Â Â pmx = pinmux_get(u300_mux_hogs[i].dev, NULL);
> + Â Â Â Â Â Â Â if (IS_ERR(pmx)) {
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("u300: could not get pinmux hog %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âu300_mux_hogs[i].name);
> + Â Â Â Â Â Â Â Â Â Â Â continue;
> + Â Â Â Â Â Â Â }
> + Â Â Â Â Â Â Â ret = pinmux_enable(pmx);
> + Â Â Â Â Â Â Â if (ret) {
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("u300: could enable pinmux hog %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âu300_mux_hogs[i].name);
> + Â Â Â Â Â Â Â Â Â Â Â continue;
> + Â Â Â Â Â Â Â }
> + Â Â Â Â Â Â Â u300_mux_hogs[i].pmx = pmx;
> + Â Â Â }
> + Â Â Â return 0;
> +}
> +subsys_initcall(u300_pinmux_fetch);
> +
> Â/*
> Â* Notice that AMBA devices are initialized before platform devices.
> Â*
> @@ -1643,10 +1719,10 @@ static struct platform_device *platform_devs[] __initdata = {
> Â Â Â Â&gpio_device,
> Â Â Â Â&nand_device,
> Â Â Â Â&wdog_device,
> - Â Â Â &ave_device
> + Â Â Â &ave_device,
> + Â Â Â &pinmux_device,
> Â};
>
> -
> Â/*
> Â* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
> Â* together so some interrupts are connected to the first one and some
> @@ -1828,6 +1904,10 @@ void __init u300_init_devices(void)
>
> Â Â Â Âu300_assign_physmem();
>
> + Â Â Â /* Initialize pinmuxing */
> + Â Â Â pinmux_register_mappings(u300_pinmux_map,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ÂARRAY_SIZE(u300_pinmux_map));
> +
> Â Â Â Â/* Register subdevices on the I2C buses */
> Â Â Â Âu300_i2c_register_board_devices();
>
> diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
> index 7444f5c..6e84f07 100644
> --- a/arch/arm/mach-u300/include/mach/syscon.h
> +++ b/arch/arm/mach-u300/include/mach/syscon.h
> @@ -234,91 +234,6 @@
> Â#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE Â Â Â (0x0004)
> Â#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE Â Â Â Â Â(0x0002)
> Â#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE Â Â Â Â Â(0x0001)
> -/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
> -#define U300_SYSCON_PMC1LR Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x007C)
> -#define U300_SYSCON_PMC1LR_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0xFFFF)
> -#define U300_SYSCON_PMC1LR_CDI_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0xC000)
> -#define U300_SYSCON_PMC1LR_CDI_CDI Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_CDI_EMIF Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x4000)
> -#ifdef CONFIG_MACH_U300_BS335
> -#define U300_SYSCON_PMC1LR_CDI_CDI2 Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x8000)
> -#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO Â Â Â Â Â Â Â Â Â(0xC000)
> -#elif CONFIG_MACH_U300_BS365
> -#define U300_SYSCON_PMC1LR_CDI_GPIO Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x8000)
> -#define U300_SYSCON_PMC1LR_CDI_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â Â (0xC000)
> -#endif
> -#define U300_SYSCON_PMC1LR_PDI_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x3000)
> -#define U300_SYSCON_PMC1LR_PDI_PDI Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_PDI_EGG Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x1000)
> -#define U300_SYSCON_PMC1LR_PDI_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â Â (0x3000)
> -#define U300_SYSCON_PMC1LR_MMCSD_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â(0x0C00)
> -#define U300_SYSCON_PMC1LR_MMCSD_MMCSD Â Â Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_MMCSD_MSPRO Â Â Â Â Â Â Â Â Â Â Â Â (0x0400)
> -#define U300_SYSCON_PMC1LR_MMCSD_DSP Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0800)
> -#define U300_SYSCON_PMC1LR_MMCSD_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â (0x0C00)
> -#define U300_SYSCON_PMC1LR_ETM_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x0300)
> -#define U300_SYSCON_PMC1LR_ETM_ACC Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_ETM_APP Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0100)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK Â Â Â Â Â Â Â Â Â Â (0x00C0)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF Â Â Â Â Â Â Â Â Â Â (0x0040)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM Â Â Â Â Â Â Â Â Â Â(0x0080)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB Â Â Â Â Â Â Â (0x00C0)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK Â Â Â Â Â Â Â Â Â Â (0x0030)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF Â Â Â Â Â Â Â Â Â Â (0x0010)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM Â Â Â Â Â Â Â Â Â Â(0x0020)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI Â Â Â Â Â Â Â Â Â Â (0x0030)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK Â Â Â Â Â Â Â Â Â Â (0x000C)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF Â Â Â Â Â Â Â Â Â Â (0x0004)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM Â Â Â Â Â Â Â Â Â Â(0x0008)
> -#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI Â Â Â Â Â Â Â Â Â Â (0x000C)
> -#define U300_SYSCON_PMC1LR_EMIF_1_MASK Â Â Â Â Â Â Â Â Â Â Â Â (0x0003)
> -#define U300_SYSCON_PMC1LR_EMIF_1_STATIC Â Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 Â Â Â Â Â Â Â Â Â Â Â (0x0001)
> -#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 Â Â Â Â Â Â Â Â Â Â Â (0x0002)
> -#define U300_SYSCON_PMC1LR_EMIF_1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x0003)
> -/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
> -#define U300_SYSCON_PMC1HR Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x007E)
> -#define U300_SYSCON_PMC1HR_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0xFFFF)
> -#define U300_SYSCON_PMC1HR_MISC_2_MASK Â Â Â Â Â Â Â Â Â Â Â Â (0xC000)
> -#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO Â Â Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1HR_MISC_2_MSPRO Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x4000)
> -#define U300_SYSCON_PMC1HR_MISC_2_DSP Â Â Â Â Â Â Â Â Â Â Â Â Â(0x8000)
> -#define U300_SYSCON_PMC1HR_MISC_2_AAIF Â Â Â Â Â Â Â Â Â Â Â Â (0xC000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK Â Â Â Â Â Â Â Â Â Â (0x3000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF Â Â Â Â Â Â Â Â Â Â (0x1000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP Â Â Â Â Â Â Â Â Â Â Â(0x2000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF Â Â Â Â Â Â Â Â Â Â (0x3000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK Â Â Â Â Â Â Â Â Â Â (0x0C00)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC Â Â Â Â Â Â Â Â Â Â Â(0x0400)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP Â Â Â Â Â Â Â Â Â Â Â(0x0800)
> -#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF Â Â Â Â Â Â Â Â Â Â (0x0C00)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK Â Â Â Â Â Â Â Â Â (0x0300)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI Â Â Â Â Â Â Â Â Â Â(0x0100)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF Â Â Â Â Â Â Â Â Â (0x0300)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK Â Â Â Â Â Â Â Â Â (0x00C0)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI Â Â Â Â Â Â Â Â Â Â(0x0040)
> -#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF Â Â Â Â Â Â Â Â Â (0x00C0)
> -#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK Â Â Â Â Â Â Â Â Â Â Â(0x0030)
> -#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI Â Â Â Â Â Â Â Â Â Â Â (0x0010)
> -#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP Â Â Â Â Â Â Â Â Â Â Â (0x0020)
> -#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF Â Â Â Â Â Â Â Â Â Â Â(0x0030)
> -#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK Â Â Â Â Â Â Â Â Â Â(0x000C)
> -#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO Â Â Â Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 Â Â Â Â Â Â Â Â Â (0x0004)
> -#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS Â Â Â Â Â Â Â Â (0x0008)
> -#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF Â Â Â Â Â Â Â Â Â Â(0x000C)
> -#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK Â Â Â Â Â Â Â Â Â Â(0x0003)
> -#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO Â Â Â Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 Â Â Â Â Â Â Â Â Â (0x0001)
> -#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF Â Â Â Â Â Â Â Â Â Â(0x0003)
> Â/* Step one for killing the applications system 16bit (-/W) */
> Â#define U300_SYSCON_KA1R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (0x0080)
> Â#define U300_SYSCON_KA1R_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0xFFFF)
> @@ -357,57 +272,6 @@
> Â#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE Â Â Â Â Â Â Â Â Â Â Â Â(0x0080)
> Â#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE Â Â Â Â Â Â Â Â (0x0040)
> Â#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK Â Â Â Â Â Â Â Â Â Â (0x003F)
> -/* Padmux 2 control */
> -#define U300_SYSCON_PMC2R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x100)
> -#define U300_SYSCON_PMC2R_APP_MISC_0_MASK Â Â Â Â Â Â Â Â Â Â Â(0x00C0)
> -#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â(0x0040)
> -#define U300_SYSCON_PMC2R_APP_MISC_0_MMC Â Â Â Â Â Â Â Â Â Â Â (0x0080)
> -#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 Â Â Â Â Â Â Â Â Â Â Â(0x00C0)
> -#define U300_SYSCON_PMC2R_APP_MISC_1_MASK Â Â Â Â Â Â Â Â Â Â Â(0x0300)
> -#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â(0x0100)
> -#define U300_SYSCON_PMC2R_APP_MISC_1_MMC Â Â Â Â Â Â Â Â Â Â Â (0x0200)
> -#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 Â Â Â Â Â Â Â Â Â Â Â(0x0300)
> -#define U300_SYSCON_PMC2R_APP_MISC_2_MASK Â Â Â Â Â Â Â Â Â Â Â(0x0C00)
> -#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â(0x0400)
> -#define U300_SYSCON_PMC2R_APP_MISC_2_MMC Â Â Â Â Â Â Â Â Â Â Â (0x0800)
> -#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 Â Â Â Â Â Â Â Â Â Â Â(0x0C00)
> -#define U300_SYSCON_PMC2R_APP_MISC_3_MASK Â Â Â Â Â Â Â Â Â Â Â(0x3000)
> -#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â(0x1000)
> -#define U300_SYSCON_PMC2R_APP_MISC_3_MMC Â Â Â Â Â Â Â Â Â Â Â (0x2000)
> -#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 Â Â Â Â Â Â Â Â Â Â Â(0x3000)
> -#define U300_SYSCON_PMC2R_APP_MISC_4_MASK Â Â Â Â Â Â Â Â Â Â Â(0xC000)
> -#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â(0x4000)
> -#define U300_SYSCON_PMC2R_APP_MISC_4_MMC Â Â Â Â Â Â Â Â Â Â Â (0x8000)
> -#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO Â Â Â Â Â Â Â Â Â(0xC000)
> -/* TODO: More SYSCON registers missing */
> -#define U300_SYSCON_PMC3R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x10c)
> -#define U300_SYSCON_PMC3R_APP_MISC_11_MASK Â Â Â Â Â Â Â Â Â Â (0xc000)
> -#define U300_SYSCON_PMC3R_APP_MISC_11_SPI Â Â Â Â Â Â Â Â Â Â Â(0x4000)
> -#define U300_SYSCON_PMC3R_APP_MISC_10_MASK Â Â Â Â Â Â Â Â Â Â (0x3000)
> -#define U300_SYSCON_PMC3R_APP_MISC_10_SPI Â Â Â Â Â Â Â Â Â Â Â(0x1000)
> -/* TODO: Missing other configs */
> -#define U300_SYSCON_PMC4R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x168)
> -#define U300_SYSCON_PMC4R_APP_MISC_12_MASK Â Â Â Â Â Â Â Â Â Â (0x0003)
> -#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO Â Â Â Â Â Â Â Â (0x0000)
> -#define U300_SYSCON_PMC4R_APP_MISC_13_MASK Â Â Â Â Â Â Â Â Â Â (0x000C)
> -#define U300_SYSCON_PMC4R_APP_MISC_13_CDI Â Â Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA Â Â Â Â Â Â Â Â Â Â (0x0004)
> -#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 Â Â Â Â Â Â Â Â Â Â(0x0008)
> -#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO Â Â Â Â Â Â Â Â (0x000C)
> -#define U300_SYSCON_PMC4R_APP_MISC_14_MASK Â Â Â Â Â Â Â Â Â Â (0x0030)
> -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI Â Â Â Â Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA Â Â Â Â Â Â Â Â Â Â (0x0010)
> -#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 Â Â Â Â Â Â Â Â Â Â (0x0020)
> -#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO Â Â Â Â Â Â Â Â (0x0030)
> -#define U300_SYSCON_PMC4R_APP_MISC_16_MASK Â Â Â Â Â Â Â Â Â Â (0x0300)
> -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 Â Â Â Â Â Â Â(0x0000)
> -#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS Â Â Â Â Â Â(0x0100)
> -#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N Â Â Â(0x0200)
> Â/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
> Â#define U300_SYSCON_S0CCR Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â(0x120)
> Â#define U300_SYSCON_S0CCR_FIELD_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â (0x43FF)
> diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
> index 677ccef..d5e4a98 100644
> --- a/arch/arm/mach-u300/mmc.c
> +++ b/arch/arm/mach-u300/mmc.c
> @@ -21,7 +21,6 @@
> Â#include <mach/dma_channels.h>
>
> Â#include "mmc.h"
> -#include "padmux.h"
>
> Âstatic struct mmci_platform_data mmc0_plat_data = {
> Â Â Â Â/*
> @@ -45,24 +44,9 @@ static struct mmci_platform_data mmc0_plat_data = {
> Âint __devinit mmc_init(struct amba_device *adev)
> Â{
> Â Â Â Âstruct device *mmcsd_device = &adev->dev;
> - Â Â Â struct pmx *pmx;
> Â Â Â Âint ret = 0;
>
> Â Â Â Âmmcsd_device->platform_data = &mmc0_plat_data;
>
> - Â Â Â /*
> - Â Â Â Â* Setup padmuxing for MMC. Since this must always be
> - Â Â Â Â* compiled into the kernel, pmx is never released.
> - Â Â Â Â*/
> - Â Â Â pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
> -
> - Â Â Â if (IS_ERR(pmx))
> - Â Â Â Â Â Â Â pr_warning("Could not get padmux handle\n");
> - Â Â Â else {
> - Â Â Â Â Â Â Â ret = pmx_activate(mmcsd_device, pmx);
> - Â Â Â Â Â Â Â if (IS_ERR_VALUE(ret))
> - Â Â Â Â Â Â Â Â Â Â Â pr_warning("Could not activate padmuxing\n");
> - Â Â Â }
> -
> Â Â Â Âreturn ret;
> Â}
> diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
> deleted file mode 100644
> index 4c93c6c..0000000
> --- a/arch/arm/mach-u300/padmux.c
> +++ /dev/null
> @@ -1,367 +0,0 @@
> -/*
> - *
> - * arch/arm/mach-u300/padmux.c
> - *
> - *
> - * Copyright (C) 2009 ST-Ericsson AB
> - * License terms: GNU General Public License (GPL) version 2
> - * U300 PADMUX functions
> - * Author: Martin Persson <martin.persson@xxxxxxxxxxxxxx>
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/device.h>
> -#include <linux/err.h>
> -#include <linux/errno.h>
> -#include <linux/io.h>
> -#include <linux/mutex.h>
> -#include <linux/string.h>
> -#include <linux/bug.h>
> -#include <linux/debugfs.h>
> -#include <linux/seq_file.h>
> -#include <mach/u300-regs.h>
> -#include <mach/syscon.h>
> -#include "padmux.h"
> -
> -static DEFINE_MUTEX(pmx_mutex);
> -
> -const u32 pmx_registers[] = {
> - Â Â Â (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
> - Â Â Â (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
> - Â Â Â (U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
> - Â Â Â (U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
> - Â Â Â (U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
> -};
> -
> -/* High level functionality */
> -
> -/* Lazy dog:
> - * onmask = {
> - * Â {"PMC1LR" mask, "PMC1LR" value},
> - * Â {"PMC1HR" mask, "PMC1HR" value},
> - * Â {"PMC2R" Âmask, "PMC2R" Âvalue},
> - * Â {"PMC3R" Âmask, "PMC3R" Âvalue},
> - * Â {"PMC4R" Âmask, "PMC4R" Âvalue}
> - * }
> - */
> -static struct pmx mmc_setting = {
> - Â Â Â .setting = U300_APP_PMX_MMC_SETTING,
> - Â Â Â .default_on = false,
> - Â Â Â .activated = false,
> - Â Â Â .name = "MMC",
> - Â Â Â .onmask = {
> - Â Â Â Â Â Â Â Â Â{U300_SYSCON_PMC1LR_MMCSD_MASK,
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_MMCSD_MMCSD},
> - Â Â Â Â Â Â Â Â Â{0, 0},
> - Â Â Â Â Â Â Â Â Â{0, 0},
> - Â Â Â Â Â Â Â Â Â{0, 0},
> - Â Â Â Â Â Â Â Â Â{U300_SYSCON_PMC4R_APP_MISC_12_MASK,
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
> - Â Â Â Â Â Â Â Â Â},
> -};
> -
> -static struct pmx spi_setting = {
> - Â Â Â .setting = U300_APP_PMX_SPI_SETTING,
> - Â Â Â .default_on = false,
> - Â Â Â .activated = false,
> - Â Â Â .name = "SPI",
> - Â Â Â .onmask = {{0, 0},
> - Â Â Â Â Â Â Â Â Â{U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
> - Â Â Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
> - Â Â Â Â Â Â Â Â Â{0, 0},
> - Â Â Â Â Â Â Â Â Â{0, 0},
> - Â Â Â Â Â Â Â Â Â{0, 0}
> - Â Â Â Â Â Â Â Â Â},
> -};
> -
> -/* Available padmux settings */
> -static struct pmx *pmx_settings[] = {
> - Â Â Â &mmc_setting,
> - Â Â Â &spi_setting,
> -};
> -
> -static void update_registers(struct pmx *pmx, bool activate)
> -{
> - Â Â Â u16 regval, val, mask;
> - Â Â Â int i;
> -
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
> - Â Â Â Â Â Â Â if (activate)
> - Â Â Â Â Â Â Â Â Â Â Â val = pmx->onmask[i].val;
> - Â Â Â Â Â Â Â else
> - Â Â Â Â Â Â Â Â Â Â Â val = 0;
> -
> - Â Â Â Â Â Â Â mask = pmx->onmask[i].mask;
> - Â Â Â Â Â Â Â if (mask != 0) {
> - Â Â Â Â Â Â Â Â Â Â Â regval = readw(pmx_registers[i]);
> - Â Â Â Â Â Â Â Â Â Â Â regval &= ~mask;
> - Â Â Â Â Â Â Â Â Â Â Â regval |= val;
> - Â Â Â Â Â Â Â Â Â Â Â writew(regval, pmx_registers[i]);
> - Â Â Â Â Â Â Â }
> - Â Â Â }
> -}
> -
> -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
> -{
> - Â Â Â int i;
> - Â Â Â struct pmx *pmx = ERR_PTR(-ENOENT);
> -
> - Â Â Â if (dev == NULL)
> - Â Â Â Â Â Â Â return ERR_PTR(-EINVAL);
> -
> - Â Â Â mutex_lock(&pmx_mutex);
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> -
> - Â Â Â Â Â Â Â if (setting == pmx_settings[i]->setting) {
> -
> - Â Â Â Â Â Â Â Â Â Â Â if (pmx_settings[i]->dev != NULL) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â WARN(1, "padmux: required setting "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â"in use by another consumer\n");
> - Â Â Â Â Â Â Â Â Â Â Â } else {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx = pmx_settings[i];
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx->dev = dev;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(dev, "padmux: setting nr %d is now "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "bound to %s and ready to use\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â setting, dev_name(dev));
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> - Â Â Â Â Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â }
> - Â Â Â }
> - Â Â Â mutex_unlock(&pmx_mutex);
> -
> - Â Â Â return pmx;
> -}
> -EXPORT_SYMBOL(pmx_get);
> -
> -int pmx_put(struct device *dev, struct pmx *pmx)
> -{
> - Â Â Â int i;
> - Â Â Â int ret = -ENOENT;
> -
> - Â Â Â if (pmx == NULL || dev == NULL)
> - Â Â Â Â Â Â Â return -EINVAL;
> -
> - Â Â Â mutex_lock(&pmx_mutex);
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> -
> - Â Â Â Â Â Â Â if (pmx->setting == pmx_settings[i]->setting) {
> -
> - Â Â Â Â Â Â Â Â Â Â Â if (dev != pmx->dev) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â WARN(1, "padmux: cannot release handle as "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "it is bound to another consumer\n");
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret = -EINVAL;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> - Â Â Â Â Â Â Â Â Â Â Â } else {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx_settings[i]->dev = NULL;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret = 0;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> - Â Â Â Â Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â }
> - Â Â Â }
> - Â Â Â mutex_unlock(&pmx_mutex);
> -
> - Â Â Â return ret;
> -}
> -EXPORT_SYMBOL(pmx_put);
> -
> -int pmx_activate(struct device *dev, struct pmx *pmx)
> -{
> - Â Â Â int i, j, ret;
> - Â Â Â ret = 0;
> -
> - Â Â Â if (pmx == NULL || dev == NULL)
> - Â Â Â Â Â Â Â return -EINVAL;
> -
> - Â Â Â mutex_lock(&pmx_mutex);
> -
> - Â Â Â /* Make sure the required bits are not used */
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> -
> - Â Â Â Â Â Â Â if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
> - Â Â Â Â Â Â Â Â Â Â Â continue;
> -
> - Â Â Â Â Â Â Â for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
> -
> - Â Â Â Â Â Â Â Â Â Â Â if (pmx_settings[i]->onmask[j].mask & pmx->
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â onmask[j].mask) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* More than one entry on the same bits */
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â WARN(1, "padmux: cannot activate "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "setting. Bit conflict with "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "an active setting\n");
> -
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret = -EUSERS;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â goto exit;
> - Â Â Â Â Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â }
> - Â Â Â }
> - Â Â Â update_registers(pmx, true);
> - Â Â Â pmx->activated = true;
> - Â Â Â dev_dbg(dev, "padmux: setting nr %d is activated\n",
> - Â Â Â Â Â Â Â pmx->setting);
> -
> -exit:
> - Â Â Â mutex_unlock(&pmx_mutex);
> - Â Â Â return ret;
> -}
> -EXPORT_SYMBOL(pmx_activate);
> -
> -int pmx_deactivate(struct device *dev, struct pmx *pmx)
> -{
> - Â Â Â int i;
> - Â Â Â int ret = -ENOENT;
> -
> - Â Â Â if (pmx == NULL || dev == NULL)
> - Â Â Â Â Â Â Â return -EINVAL;
> -
> - Â Â Â mutex_lock(&pmx_mutex);
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> -
> - Â Â Â Â Â Â Â if (pmx_settings[i]->dev == NULL)
> - Â Â Â Â Â Â Â Â Â Â Â continue;
> -
> - Â Â Â Â Â Â Â if (pmx->setting == pmx_settings[i]->setting) {
> -
> - Â Â Â Â Â Â Â Â Â Â Â if (dev != pmx->dev) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â WARN(1, "padmux: cannot deactivate "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â"pmx setting as it was activated "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â"by another consumer\n");
> -
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret = -EBUSY;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â continue;
> - Â Â Â Â Â Â Â Â Â Â Â } else {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â update_registers(pmx, false);
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx_settings[i]->dev = NULL;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx->activated = false;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret = 0;
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(dev, "padmux: setting nr %d is deactivated",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pmx->setting);
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> - Â Â Â Â Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â }
> - Â Â Â }
> - Â Â Â mutex_unlock(&pmx_mutex);
> -
> - Â Â Â return ret;
> -}
> -EXPORT_SYMBOL(pmx_deactivate);
> -
> -/*
> - * For internal use only. If it is to be exported,
> - * it should be reentrant. Notice that pmx_activate
> - * (i.e. runtime settings) always override default settings.
> - */
> -static int pmx_set_default(void)
> -{
> - Â Â Â /* Used to identify several entries on the same bits */
> - Â Â Â u16 modbits[ARRAY_SIZE(pmx_registers)];
> -
> - Â Â Â int i, j;
> -
> - Â Â Â memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
> -
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> -
> - Â Â Â Â Â Â Â if (!pmx_settings[i]->default_on)
> - Â Â Â Â Â Â Â Â Â Â Â continue;
> -
> - Â Â Â Â Â Â Â for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
> -
> - Â Â Â Â Â Â Â Â Â Â Â /* Make sure there is only one entry on the same bits */
> - Â Â Â Â Â Â Â Â Â Â Â if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â BUG();
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â return -EUSERS;
> - Â Â Â Â Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â Â Â Â Â modbits[j] |= pmx_settings[i]->onmask[j].mask;
> - Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â update_registers(pmx_settings[i], true);
> - Â Â Â }
> - Â Â Â return 0;
> -}
> -
> -#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
> -static int pmx_show(struct seq_file *s, void *data)
> -{
> - Â Â Â int i;
> - Â Â Â seq_printf(s, "-------------------------------------------------\n");
> - Â Â Â seq_printf(s, "SETTING Â Â BOUND TO DEVICE Â Â Â Â Â Â Â STATE\n");
> - Â Â Â seq_printf(s, "-------------------------------------------------\n");
> - Â Â Â mutex_lock(&pmx_mutex);
> - Â Â Â for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
> - Â Â Â Â Â Â Â /* Format pmx and device name nicely */
> - Â Â Â Â Â Â Â char cdp[33];
> - Â Â Â Â Â Â Â int chars;
> -
> - Â Â Â Â Â Â Â chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
> - Â Â Â Â Â Â Â while (chars < 16) {
> - Â Â Â Â Â Â Â Â Â Â Â cdp[chars] = ' ';
> - Â Â Â Â Â Â Â Â Â Â Â chars++;
> - Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_name(pmx_settings[i]->dev) : "N/A");
> - Â Â Â Â Â Â Â while (chars < 16) {
> - Â Â Â Â Â Â Â Â Â Â Â cdp[chars+16] = ' ';
> - Â Â Â Â Â Â Â Â Â Â Â chars++;
> - Â Â Â Â Â Â Â }
> - Â Â Â Â Â Â Â cdp[32] = '\0';
> -
> - Â Â Â Â Â Â Â seq_printf(s,
> - Â Â Â Â Â Â Â Â Â Â Â "%s\t%s\n",
> - Â Â Â Â Â Â Â Â Â Â Â &cdp[0],
> - Â Â Â Â Â Â Â Â Â Â Â pmx_settings[i]->activated ?
> - Â Â Â Â Â Â Â Â Â Â Â "ACTIVATED" : "DEACTIVATED"
> - Â Â Â Â Â Â Â Â Â Â Â );
> -
> - Â Â Â }
> - Â Â Â mutex_unlock(&pmx_mutex);
> - Â Â Â return 0;
> -}
> -
> -static int pmx_open(struct inode *inode, struct file *file)
> -{
> - Â Â Â return single_open(file, pmx_show, NULL);
> -}
> -
> -static const struct file_operations pmx_operations = {
> -    .owner     Â= THIS_MODULE,
> -    .open      = pmx_open,
> -    .read      = seq_read,
> -    .llseek     = seq_lseek,
> -    .release    Â= single_release,
> -};
> -
> -static int __init init_pmx_read_debugfs(void)
> -{
> - Â Â Â /* Expose a simple debugfs interface to view pmx settings */
> - Â Â Â (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ÂNULL, NULL,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â&pmx_operations);
> - Â Â Â return 0;
> -}
> -
> -/*
> - * This needs to come in after the core_initcall(),
> - * because debugfs is not available until
> - * the subsystems come up.
> - */
> -module_init(init_pmx_read_debugfs);
> -#endif
> -
> -static int __init pmx_init(void)
> -{
> - Â Â Â int ret;
> -
> - Â Â Â ret = pmx_set_default();
> -
> - Â Â Â if (IS_ERR_VALUE(ret))
> - Â Â Â Â Â Â Â pr_crit("padmux: default settings could not be set\n");
> -
> - Â Â Â return 0;
> -}
> -
> -/* Should be initialized before consumers */
> -core_initcall(pmx_init);
> diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
> deleted file mode 100644
> index 6e8b860..0000000
> --- a/arch/arm/mach-u300/padmux.h
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -/*
> - *
> - * arch/arm/mach-u300/padmux.h
> - *
> - *
> - * Copyright (C) 2009 ST-Ericsson AB
> - * License terms: GNU General Public License (GPL) version 2
> - * U300 PADMUX API
> - * Author: Martin Persson <martin.persson@xxxxxxxxxxxxxx>
> - */
> -
> -#ifndef __MACH_U300_PADMUX_H
> -#define __MACH_U300_PADMUX_H
> -
> -enum pmx_settings {
> - Â Â Â U300_APP_PMX_MMC_SETTING,
> - Â Â Â U300_APP_PMX_SPI_SETTING
> -};
> -
> -struct pmx_onmask {
> - Â Â Â u16 mask; Â Â Â Â Â Â Â /* Mask bits */
> - Â Â Â u16 val; Â Â Â Â Â Â Â Â/* Value when active */
> -};
> -
> -struct pmx {
> - Â Â Â struct device *dev;
> - Â Â Â enum pmx_settings setting;
> - Â Â Â char *name;
> - Â Â Â bool activated;
> - Â Â Â bool default_on;
> - Â Â Â struct pmx_onmask onmask[];
> -};
> -
> -struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
> -int pmx_put(struct device *dev, struct pmx *pmx);
> -int pmx_activate(struct device *dev, struct pmx *pmx);
> -int pmx_deactivate(struct device *dev, struct pmx *pmx);
> -
> -#endif
> diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
> index 7b597e2..a1affac 100644
> --- a/arch/arm/mach-u300/spi.c
> +++ b/arch/arm/mach-u300/spi.c
> @@ -14,8 +14,6 @@
> Â#include <mach/coh901318.h>
> Â#include <mach/dma_channels.h>
>
> -#include "padmux.h"
> -
> Â/*
> Â* The following is for the actual devices on the SSP/SPI bus
> Â*/
> @@ -95,25 +93,7 @@ static struct pl022_ssp_controller ssp_platform_data = {
>
> Âvoid __init u300_spi_init(struct amba_device *adev)
> Â{
> - Â Â Â struct pmx *pmx;
> -
> Â Â Â Âadev->dev.platform_data = &ssp_platform_data;
> - Â Â Â /*
> - Â Â Â Â* Setup padmuxing for SPI. Since this must always be
> - Â Â Â Â* compiled into the kernel, pmx is never released.
> - Â Â Â Â*/
> - Â Â Â pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
> -
> - Â Â Â if (IS_ERR(pmx))
> - Â Â Â Â Â Â Â dev_warn(&adev->dev, "Could not get padmux handle\n");
> - Â Â Â else {
> - Â Â Â Â Â Â Â int ret;
> -
> - Â Â Â Â Â Â Â ret = pmx_activate(&adev->dev, pmx);
> - Â Â Â Â Â Â Â if (IS_ERR_VALUE(ret))
> - Â Â Â Â Â Â Â Â Â Â Â dev_warn(&adev->dev, "Could not activate padmuxing\n");
> - Â Â Â }
> -
> Â}
>
> Âvoid __init u300_spi_register_board_devices(void)
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 7fa0fe0..8b3d081 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -26,4 +26,11 @@ config DEBUG_PINCTRL
> Â Â Â Âhelp
> Â Â Â Â ÂSay Y here to add some extra checks and diagnostics to PINCTRL calls.
>
> +config PINMUX_U300
> + Â Â Â bool "U300 pinmux driver"
> + Â Â Â depends on ARCH_U300
> + Â Â Â select PINMUX
> + Â Â Â help
> + Â Â Â Â Say Y here to enable the U300 pinmux driver
> +
> Âendif
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index 596ce9f..63d4241 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -4,3 +4,4 @@ ccflags-$(CONFIG_DEBUG_PINMUX) Â+= -DDEBUG
>
> Âobj-$(CONFIG_PINCTRL) Â Â Â Â Â+= core.o
> Âobj-$(CONFIG_PINMUX) Â Â Â Â Â += pinmux.o
> +obj-$(CONFIG_PINMUX_U300) Â Â Â+= pinmux-u300.o
> diff --git a/drivers/pinctrl/pinmux-u300.c b/drivers/pinctrl/pinmux-u300.c
> new file mode 100644
> index 0000000..a5c3385
> --- /dev/null
> +++ b/drivers/pinctrl/pinmux-u300.c
> @@ -0,0 +1,1148 @@
> +/*
> + * Driver for the U300 pin controller
> + *
> + * Based on the original U300 padmux functions
> + * Copyright (C) 2009-2011 ST-Ericsson AB
> + * Author: Martin Persson <martin.persson@xxxxxxxxxxxxxx>
> + * Author: Linus Walleij <linus.walleij@xxxxxxxxxx>
> + *
> + * The DB3350 design and control registers are oriented around pads rather than
> + * pins, so we enumerate the pads we can mux rather than actual pins. The pads
> + * are connected to different pins in different packaging types, so it would
> + * be confusing.
> + */
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +/*
> + * Register definitions for the U300 Padmux control registers in the
> + * system controller
> + */
> +
> +/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
> +#define U300_SYSCON_PMC1LR Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x007C
> +#define U300_SYSCON_PMC1LR_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0xFFFF
> +#define U300_SYSCON_PMC1LR_CDI_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â0xC000
> +#define U300_SYSCON_PMC1LR_CDI_CDI Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_CDI_EMIF Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x4000
> +/* For BS335 */
> +#define U300_SYSCON_PMC1LR_CDI_CDI2 Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x8000
> +#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO Â Â Â Â Â Â Â Â Â0xC000
> +/* For BS365 */
> +#define U300_SYSCON_PMC1LR_CDI_GPIO Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x8000
> +#define U300_SYSCON_PMC1LR_CDI_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â Â 0xC000
> +/* Common defs */
> +#define U300_SYSCON_PMC1LR_PDI_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x3000
> +#define U300_SYSCON_PMC1LR_PDI_PDI Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_PDI_EGG Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x1000
> +#define U300_SYSCON_PMC1LR_PDI_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â Â 0x3000
> +#define U300_SYSCON_PMC1LR_MMCSD_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â0x0C00
> +#define U300_SYSCON_PMC1LR_MMCSD_MMCSD Â Â Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_MMCSD_MSPRO Â Â Â Â Â Â Â Â Â Â Â Â 0x0400
> +#define U300_SYSCON_PMC1LR_MMCSD_DSP Â Â Â Â Â Â Â Â Â Â Â Â Â 0x0800
> +#define U300_SYSCON_PMC1LR_MMCSD_WCDMA Â Â Â Â Â Â Â Â Â Â Â Â 0x0C00
> +#define U300_SYSCON_PMC1LR_ETM_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x0300
> +#define U300_SYSCON_PMC1LR_ETM_ACC Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_ETM_APP Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x0100
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK Â Â Â Â Â Â Â Â Â Â 0x00C0
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF Â Â Â Â Â Â Â Â Â Â 0x0040
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM Â Â Â Â Â Â Â Â Â Â0x0080
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB Â Â Â Â Â Â Â 0x00C0
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK Â Â Â Â Â Â Â Â Â Â 0x0030
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF Â Â Â Â Â Â Â Â Â Â 0x0010
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM Â Â Â Â Â Â Â Â Â Â0x0020
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI Â Â Â Â Â Â Â Â Â Â 0x0030
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK Â Â Â Â Â Â Â Â Â Â 0x000C
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF Â Â Â Â Â Â Â Â Â Â 0x0004
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM Â Â Â Â Â Â Â Â Â Â0x0008
> +#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI Â Â Â Â Â Â Â Â Â Â 0x000C
> +#define U300_SYSCON_PMC1LR_EMIF_1_MASK Â Â Â Â Â Â Â Â Â Â Â Â 0x0003
> +#define U300_SYSCON_PMC1LR_EMIF_1_STATIC Â Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 Â Â Â Â Â Â Â Â Â Â Â 0x0001
> +#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 Â Â Â Â Â Â Â Â Â Â Â 0x0002
> +#define U300_SYSCON_PMC1LR_EMIF_1 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x0003
> +/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
> +#define U300_SYSCON_PMC1HR Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x007E
> +#define U300_SYSCON_PMC1HR_MASK Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0xFFFF
> +#define U300_SYSCON_PMC1HR_MISC_2_MASK Â Â Â Â Â Â Â Â Â Â Â Â 0xC000
> +#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO Â Â Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1HR_MISC_2_MSPRO Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x4000
> +#define U300_SYSCON_PMC1HR_MISC_2_DSP Â Â Â Â Â Â Â Â Â Â Â Â Â0x8000
> +#define U300_SYSCON_PMC1HR_MISC_2_AAIF Â Â Â Â Â Â Â Â Â Â Â Â 0xC000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK Â Â Â Â Â Â Â Â Â Â 0x3000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF Â Â Â Â Â Â Â Â Â Â 0x1000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP Â Â Â Â Â Â Â Â Â Â Â0x2000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF Â Â Â Â Â Â Â Â Â Â 0x3000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK Â Â Â Â Â Â Â Â Â Â 0x0C00
> +#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC Â Â Â Â Â Â Â Â Â Â Â0x0400
> +#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP Â Â Â Â Â Â Â Â Â Â Â0x0800
> +#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF Â Â Â Â Â Â Â Â Â Â 0x0C00
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK Â Â Â Â Â Â Â Â Â 0x0300
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI Â Â Â Â Â Â Â Â Â Â0x0100
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF Â Â Â Â Â Â Â Â Â 0x0300
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK Â Â Â Â Â Â Â Â Â 0x00C0
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI Â Â Â Â Â Â Â Â Â Â0x0040
> +#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF Â Â Â Â Â Â Â Â Â 0x00C0
> +#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK Â Â Â Â Â Â Â Â Â Â Â0x0030
> +#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI Â Â Â Â Â Â Â Â Â Â Â 0x0010
> +#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP Â Â Â Â Â Â Â Â Â Â Â 0x0020
> +#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF Â Â Â Â Â Â Â Â Â Â Â0x0030
> +#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK Â Â Â Â Â Â Â Â Â Â0x000C
> +#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO Â Â Â Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 Â Â Â Â Â Â Â Â Â 0x0004
> +#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS Â Â Â Â Â Â Â Â 0x0008
> +#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF Â Â Â Â Â Â Â Â Â Â0x000C
> +#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK Â Â Â Â Â Â Â Â Â Â0x0003
> +#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO Â Â Â Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 Â Â Â Â Â Â Â Â Â 0x0001
> +#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF Â Â Â Â Â Â Â Â Â Â0x0003
> +/* Padmux 2 control */
> +#define U300_SYSCON_PMC2R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x100
> +#define U300_SYSCON_PMC2R_APP_MISC_0_MASK Â Â Â Â Â Â Â Â Â Â Â0x00C0
> +#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â0x0040
> +#define U300_SYSCON_PMC2R_APP_MISC_0_MMC Â Â Â Â Â Â Â Â Â Â Â 0x0080
> +#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 Â Â Â Â Â Â Â Â Â Â Â0x00C0
> +#define U300_SYSCON_PMC2R_APP_MISC_1_MASK Â Â Â Â Â Â Â Â Â Â Â0x0300
> +#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â0x0100
> +#define U300_SYSCON_PMC2R_APP_MISC_1_MMC Â Â Â Â Â Â Â Â Â Â Â 0x0200
> +#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 Â Â Â Â Â Â Â Â Â Â Â0x0300
> +#define U300_SYSCON_PMC2R_APP_MISC_2_MASK Â Â Â Â Â Â Â Â Â Â Â0x0C00
> +#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â0x0400
> +#define U300_SYSCON_PMC2R_APP_MISC_2_MMC Â Â Â Â Â Â Â Â Â Â Â 0x0800
> +#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 Â Â Â Â Â Â Â Â Â Â Â0x0C00
> +#define U300_SYSCON_PMC2R_APP_MISC_3_MASK Â Â Â Â Â Â Â Â Â Â Â0x3000
> +#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â0x1000
> +#define U300_SYSCON_PMC2R_APP_MISC_3_MMC Â Â Â Â Â Â Â Â Â Â Â 0x2000
> +#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 Â Â Â Â Â Â Â Â Â Â Â0x3000
> +#define U300_SYSCON_PMC2R_APP_MISC_4_MASK Â Â Â Â Â Â Â Â Â Â Â0xC000
> +#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM Â Â Â Â Â Â Â Â Â Â Â Â0x4000
> +#define U300_SYSCON_PMC2R_APP_MISC_4_MMC Â Â Â Â Â Â Â Â Â Â Â 0x8000
> +#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO Â Â Â Â Â Â Â Â Â0xC000
> +/* TODO: More SYSCON registers missing */
> +#define U300_SYSCON_PMC3R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x10C
> +#define U300_SYSCON_PMC3R_APP_MISC_11_MASK Â Â Â Â Â Â Â Â Â Â 0xC000
> +#define U300_SYSCON_PMC3R_APP_MISC_11_SPI Â Â Â Â Â Â Â Â Â Â Â0x4000
> +#define U300_SYSCON_PMC3R_APP_MISC_10_MASK Â Â Â Â Â Â Â Â Â Â 0x3000
> +#define U300_SYSCON_PMC3R_APP_MISC_10_SPI Â Â Â Â Â Â Â Â Â Â Â0x1000
> +/* TODO: Missing other configs */
> +#define U300_SYSCON_PMC4R Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â0x168
> +#define U300_SYSCON_PMC4R_APP_MISC_12_MASK Â Â Â Â Â Â Â Â Â Â 0x0003
> +#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO Â Â Â Â Â Â Â Â 0x0000
> +#define U300_SYSCON_PMC4R_APP_MISC_13_MASK Â Â Â Â Â Â Â Â Â Â 0x000C
> +#define U300_SYSCON_PMC4R_APP_MISC_13_CDI Â Â Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA Â Â Â Â Â Â Â Â Â Â 0x0004
> +#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 Â Â Â Â Â Â Â Â Â Â0x0008
> +#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO Â Â Â Â Â Â Â Â 0x000C
> +#define U300_SYSCON_PMC4R_APP_MISC_14_MASK Â Â Â Â Â Â Â Â Â Â 0x0030
> +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI Â Â Â Â Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA Â Â Â Â Â Â Â Â Â Â 0x0010
> +#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 Â Â Â Â Â Â Â Â Â Â 0x0020
> +#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO Â Â Â Â Â Â Â Â 0x0030
> +#define U300_SYSCON_PMC4R_APP_MISC_16_MASK Â Â Â Â Â Â Â Â Â Â 0x0300
> +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 Â Â Â Â Â Â Â0x0000
> +#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS Â Â Â Â Â Â0x0100
> +#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N Â Â Â0x0200
> +
> +#define DRIVER_NAME "pinmux-u300"
> +
> +/*
> + * The DB3350 has 467 pads, I have enumerated the pads clockwise around the
> + * edges of the silicon, finger by finger. LTCORNER upper left is pad 0.
> + * Data taken from the PadRing chart, arranged like this:
> + *
> + * Â 0 ..... 104
> + * 466 Â Â Â Â105
> + * Â . Â Â Â Â.
> + * Â . Â Â Â Â.
> + * 358 Â Â Â Â224
> + * Â357 .... 225
> + */
> +#define U300_NUM_PADS 467
> +
> +/* Pad names for the pinmux subsystem */
> +static const struct pinctrl_pin_desc __refdata u300_pads[] = {
> + Â Â Â /* Pads along the top edge of the chip */
> + Â Â Â PINCTRL_PIN(0, "P PAD VDD 28"),
> + Â Â Â PINCTRL_PIN(1, "P PAD GND 28"),
> + Â Â Â PINCTRL_PIN(2, "PO SIM RST N"),
> + Â Â Â PINCTRL_PIN(3, "VSSIO 25"),
> + Â Â Â PINCTRL_PIN(4, "VSSA ADDA ESDSUB"),
> + Â Â Â PINCTRL_PIN(5, "PWR VSSCOMMON"),
> + Â Â Â PINCTRL_PIN(6, "PI ADC I1 POS"),
> + Â Â Â PINCTRL_PIN(7, "PI ADC I1 NEG"),
> + Â Â Â PINCTRL_PIN(8, "PWR VSSAD0"),
> + Â Â Â PINCTRL_PIN(9, "PWR VCCAD0"),
> + Â Â Â PINCTRL_PIN(10, "PI ADC Q1 NEG"),
> + Â Â Â PINCTRL_PIN(11, "PI ADC Q1 POS"),
> + Â Â Â PINCTRL_PIN(12, "PWR VDDAD"),
> + Â Â Â PINCTRL_PIN(13, "PWR GNDAD"),
> + Â Â Â PINCTRL_PIN(14, "PI ADC I2 POS"),
> + Â Â Â PINCTRL_PIN(15, "PI ADC I2 NEG"),
> + Â Â Â PINCTRL_PIN(16, "PWR VSSAD1"),
> + Â Â Â PINCTRL_PIN(17, "PWR VCCAD1"),
> + Â Â Â PINCTRL_PIN(18, "PI ADC Q2 NEG"),
> + Â Â Â PINCTRL_PIN(19, "PI ADC Q2 POS"),
> + Â Â Â PINCTRL_PIN(20, "VSSA ADDA ESDSUB"),
> + Â Â Â PINCTRL_PIN(21, "PWR VCCGPAD"),
> + Â Â Â PINCTRL_PIN(22, "PI TX POW"),
> + Â Â Â PINCTRL_PIN(23, "PWR VSSGPAD"),
> + Â Â Â PINCTRL_PIN(24, "PO DAC I POS"),
> + Â Â Â PINCTRL_PIN(25, "PO DAC I NEG"),
> + Â Â Â PINCTRL_PIN(26, "PO DAC Q POS"),
> + Â Â Â PINCTRL_PIN(27, "PO DAC Q NEG"),
> + Â Â Â PINCTRL_PIN(28, "PWR VSSDA"),
> + Â Â Â PINCTRL_PIN(29, "PWR VCCDA"),
> + Â Â Â PINCTRL_PIN(30, "VSSA ADDA ESDSUB"),
> + Â Â Â PINCTRL_PIN(31, "P PAD VDDIO 11"),
> + Â Â Â PINCTRL_PIN(32, "PI PLL 26 FILTVDD"),
> + Â Â Â PINCTRL_PIN(33, "PI PLL 26 VCONT"),
> + Â Â Â PINCTRL_PIN(34, "PWR AGNDPLL2V5 32 13"),
> + Â Â Â PINCTRL_PIN(35, "PWR AVDDPLL2V5 32 13"),
> + Â Â Â PINCTRL_PIN(36, "VDDA PLL ESD"),
> + Â Â Â PINCTRL_PIN(37, "VSSA PLL ESD"),
> + Â Â Â PINCTRL_PIN(38, "VSS PLL"),
> + Â Â Â PINCTRL_PIN(39, "VDDC PLL"),
> + Â Â Â PINCTRL_PIN(40, "PWR AGNDPLL2V5 26 60"),
> + Â Â Â PINCTRL_PIN(41, "PWR AVDDPLL2V5 26 60"),
> + Â Â Â PINCTRL_PIN(42, "PWR AVDDPLL2V5 26 208"),
> + Â Â Â PINCTRL_PIN(43, "PWR AGNDPLL2V5 26 208"),
> + Â Â Â PINCTRL_PIN(44, "PWR AVDDPLL2V5 13 208"),
> + Â Â Â PINCTRL_PIN(45, "PWR AGNDPLL2V5 13 208"),
> + Â Â Â PINCTRL_PIN(46, "P PAD VSSIO 11"),
> + Â Â Â PINCTRL_PIN(47, "P PAD VSSIO 12"),
> + Â Â Â PINCTRL_PIN(48, "PI POW RST N"),
> + Â Â Â PINCTRL_PIN(49, "VDDC IO"),
> + Â Â Â PINCTRL_PIN(50, "P PAD VDDIO 16"),
> + Â Â Â PINCTRL_PIN(51, "PO RF WCDMA EN 4"),
> + Â Â Â PINCTRL_PIN(52, "PO RF WCDMA EN 3"),
> + Â Â Â PINCTRL_PIN(53, "PO RF WCDMA EN 2"),
> + Â Â Â PINCTRL_PIN(54, "PO RF WCDMA EN 1"),
> + Â Â Â PINCTRL_PIN(55, "PO RF WCDMA EN 0"),
> + Â Â Â PINCTRL_PIN(56, "PO GSM PA ENABLE"),
> + Â Â Â PINCTRL_PIN(57, "PO RF DATA STRB"),
> + Â Â Â PINCTRL_PIN(58, "PO RF DATA2"),
> + Â Â Â PINCTRL_PIN(59, "PIO RF DATA1"),
> + Â Â Â PINCTRL_PIN(60, "PIO RF DATA0"),
> + Â Â Â PINCTRL_PIN(61, "P PAD VDD 11"),
> + Â Â Â PINCTRL_PIN(62, "P PAD GND 11"),
> + Â Â Â PINCTRL_PIN(63, "P PAD VSSIO 16"),
> + Â Â Â PINCTRL_PIN(64, "P PAD VDDIO 18"),
> + Â Â Â PINCTRL_PIN(65, "PO RF CTRL STRB2"),
> + Â Â Â PINCTRL_PIN(66, "PO RF CTRL STRB1"),
> + Â Â Â PINCTRL_PIN(67, "PO RF CTRL STRB0"),
> + Â Â Â PINCTRL_PIN(68, "PIO RF CTRL DATA"),
> + Â Â Â PINCTRL_PIN(69, "PO RF CTRL CLK"),
> + Â Â Â PINCTRL_PIN(70, "PO TX ADC STRB"),
> + Â Â Â PINCTRL_PIN(71, "PO ANT SW 2"),
> + Â Â Â PINCTRL_PIN(72, "PO ANT SW 3"),
> + Â Â Â PINCTRL_PIN(73, "PO ANT SW 0"),
> + Â Â Â PINCTRL_PIN(74, "PO ANT SW 1"),
> + Â Â Â PINCTRL_PIN(75, "PO M CLKRQ"),
> + Â Â Â PINCTRL_PIN(76, "PI M CLK"),
> + Â Â Â PINCTRL_PIN(77, "PI RTC CLK"),
> + Â Â Â PINCTRL_PIN(78, "P PAD VDD 8"),
> + Â Â Â PINCTRL_PIN(79, "P PAD GND 8"),
> + Â Â Â PINCTRL_PIN(80, "P PAD VSSIO 13"),
> + Â Â Â PINCTRL_PIN(81, "P PAD VDDIO 13"),
> + Â Â Â PINCTRL_PIN(82, "PO SYS 1 CLK"),
> + Â Â Â PINCTRL_PIN(83, "PO SYS 2 CLK"),
> + Â Â Â PINCTRL_PIN(84, "PO SYS 0 CLK"),
> + Â Â Â PINCTRL_PIN(85, "PI SYS 0 CLKRQ"),
> + Â Â Â PINCTRL_PIN(86, "PO PWR MNGT CTRL 1"),
> + Â Â Â PINCTRL_PIN(87, "PO PWR MNGT CTRL 0"),
> + Â Â Â PINCTRL_PIN(88, "PO RESOUT2 RST N"),
> + Â Â Â PINCTRL_PIN(89, "PO RESOUT1 RST N"),
> + Â Â Â PINCTRL_PIN(90, "PO RESOUT0 RST N"),
> + Â Â Â PINCTRL_PIN(91, "PI SERVICE N"),
> + Â Â Â PINCTRL_PIN(92, "P PAD VDD 29"),
> + Â Â Â PINCTRL_PIN(93, "P PAD GND 29"),
> + Â Â Â PINCTRL_PIN(94, "P PAD VSSIO 8"),
> + Â Â Â PINCTRL_PIN(95, "P PAD VDDIO 8"),
> + Â Â Â PINCTRL_PIN(96, "PI EXT IRQ1 N"),
> + Â Â Â PINCTRL_PIN(97, "PI EXT IRQ0 N"),
> + Â Â Â PINCTRL_PIN(98, "PIO DC ON"),
> + Â Â Â PINCTRL_PIN(99, "PIO ACC APP I2C DATA"),
> + Â Â Â PINCTRL_PIN(100, "PIO ACC APP I2C CLK"),
> + Â Â Â PINCTRL_PIN(101, "P PAD VDD 12"),
> + Â Â Â PINCTRL_PIN(102, "P PAD GND 12"),
> + Â Â Â PINCTRL_PIN(103, "P PAD VSSIO 14"),
> + Â Â Â PINCTRL_PIN(104, "P PAD VDDIO 14"),
> + Â Â Â /* Pads along the right edge of the chip */
> + Â Â Â PINCTRL_PIN(105, "PIO APP I2C1 DATA"),
> + Â Â Â PINCTRL_PIN(106, "PIO APP I2C1 CLK"),
> + Â Â Â PINCTRL_PIN(107, "PO KEY OUT0"),
> + Â Â Â PINCTRL_PIN(108, "PO KEY OUT1"),
> + Â Â Â PINCTRL_PIN(109, "PO KEY OUT2"),
> + Â Â Â PINCTRL_PIN(110, "PO KEY OUT3"),
> + Â Â Â PINCTRL_PIN(111, "PO KEY OUT4"),
> + Â Â Â PINCTRL_PIN(112, "PI KEY IN0"),
> + Â Â Â PINCTRL_PIN(113, "PI KEY IN1"),
> + Â Â Â PINCTRL_PIN(114, "PI KEY IN2"),
> + Â Â Â PINCTRL_PIN(115, "P PAD VDDIO 15"),
> + Â Â Â PINCTRL_PIN(116, "P PAD VSSIO 15"),
> + Â Â Â PINCTRL_PIN(117, "P PAD GND 13"),
> + Â Â Â PINCTRL_PIN(118, "P PAD VDD 13"),
> + Â Â Â PINCTRL_PIN(119, "PI KEY IN3"),
> + Â Â Â PINCTRL_PIN(120, "PI KEY IN4"),
> + Â Â Â PINCTRL_PIN(121, "PI KEY IN5"),
> + Â Â Â PINCTRL_PIN(122, "PIO APP PCM I2S1 DATA B"),
> + Â Â Â PINCTRL_PIN(123, "PIO APP PCM I2S1 DATA A"),
> + Â Â Â PINCTRL_PIN(124, "PIO APP PCM I2S1 WS"),
> + Â Â Â PINCTRL_PIN(125, "PIO APP PCM I2S1 CLK"),
> + Â Â Â PINCTRL_PIN(126, "PIO APP PCM I2S0 DATA B"),
> + Â Â Â PINCTRL_PIN(127, "PIO APP PCM I2S0 DATA A"),
> + Â Â Â PINCTRL_PIN(128, "PIO APP PCM I2S0 WS"),
> + Â Â Â PINCTRL_PIN(129, "PIO APP PCM I2S0 CLK"),
> + Â Â Â PINCTRL_PIN(130, "P PAD VDD 17"),
> + Â Â Â PINCTRL_PIN(131, "P PAD GND 17"),
> + Â Â Â PINCTRL_PIN(132, "P PAD VSSIO 19"),
> + Â Â Â PINCTRL_PIN(133, "P PAD VDDIO 19"),
> + Â Â Â PINCTRL_PIN(134, "UART0 RTS"),
> + Â Â Â PINCTRL_PIN(135, "UART0 CTS"),
> + Â Â Â PINCTRL_PIN(136, "UART0 TX"),
> + Â Â Â PINCTRL_PIN(137, "UART0 RX"),
> + Â Â Â PINCTRL_PIN(138, "PIO ACC SPI DO"),
> + Â Â Â PINCTRL_PIN(139, "PIO ACC SPI DI"),
> + Â Â Â PINCTRL_PIN(140, "PIO ACC SPI CS0 N"),
> + Â Â Â PINCTRL_PIN(141, "PIO ACC SPI CS1 N"),
> + Â Â Â PINCTRL_PIN(142, "PIO ACC SPI CS2 N"),
> + Â Â Â PINCTRL_PIN(143, "PIO ACC SPI CLK"),
> + Â Â Â PINCTRL_PIN(144, "PO PDI EXT RST N"),
> + Â Â Â PINCTRL_PIN(145, "P PAD VDDIO 22"),
> + Â Â Â PINCTRL_PIN(146, "P PAD VSSIO 22"),
> + Â Â Â PINCTRL_PIN(147, "P PAD GND 18"),
> + Â Â Â PINCTRL_PIN(148, "P PAD VDD 18"),
> + Â Â Â PINCTRL_PIN(149, "PIO PDI C0"),
> + Â Â Â PINCTRL_PIN(150, "PIO PDI C1"),
> + Â Â Â PINCTRL_PIN(151, "PIO PDI C2"),
> + Â Â Â PINCTRL_PIN(152, "PIO PDI C3"),
> + Â Â Â PINCTRL_PIN(153, "PIO PDI C4"),
> + Â Â Â PINCTRL_PIN(154, "PIO PDI C5"),
> + Â Â Â PINCTRL_PIN(155, "PIO PDI D0"),
> + Â Â Â PINCTRL_PIN(156, "PIO PDI D1"),
> + Â Â Â PINCTRL_PIN(157, "PIO PDI D2"),
> + Â Â Â PINCTRL_PIN(158, "PIO PDI D3"),
> + Â Â Â PINCTRL_PIN(159, "P PAD VDDIO 21"),
> + Â Â Â PINCTRL_PIN(160, "P PAD VSSIO 21"),
> + Â Â Â PINCTRL_PIN(161, "PIO PDI D4"),
> + Â Â Â PINCTRL_PIN(162, "PIO PDI D5"),
> + Â Â Â PINCTRL_PIN(163, "PIO PDI D6"),
> + Â Â Â PINCTRL_PIN(164, "PIO PDI D7"),
> + Â Â Â PINCTRL_PIN(165, "PIO MS INS"),
> + Â Â Â PINCTRL_PIN(166, "MMC DATA DIR LS"),
> + Â Â Â PINCTRL_PIN(167, "MMC DATA 3"),
> + Â Â Â PINCTRL_PIN(168, "MMC DATA 2"),
> + Â Â Â PINCTRL_PIN(169, "MMC DATA 1"),
> + Â Â Â PINCTRL_PIN(170, "MMC DATA 0"),
> + Â Â Â PINCTRL_PIN(171, "MMC CMD DIR LS"),
> + Â Â Â PINCTRL_PIN(172, "P PAD VDD 27"),
> + Â Â Â PINCTRL_PIN(173, "P PAD GND 27"),
> + Â Â Â PINCTRL_PIN(174, "P PAD VSSIO 20"),
> + Â Â Â PINCTRL_PIN(175, "P PAD VDDIO 20"),
> + Â Â Â PINCTRL_PIN(176, "MMC CMD"),
> + Â Â Â PINCTRL_PIN(177, "MMC CLK"),
> + Â Â Â PINCTRL_PIN(178, "PIO APP GPIO 14"),
> + Â Â Â PINCTRL_PIN(179, "PIO APP GPIO 13"),
> + Â Â Â PINCTRL_PIN(180, "PIO APP GPIO 11"),
> + Â Â Â PINCTRL_PIN(181, "PIO APP GPIO 25"),
> + Â Â Â PINCTRL_PIN(182, "PIO APP GPIO 24"),
> + Â Â Â PINCTRL_PIN(183, "PIO APP GPIO 23"),
> + Â Â Â PINCTRL_PIN(184, "PIO APP GPIO 22"),
> + Â Â Â PINCTRL_PIN(185, "PIO APP GPIO 21"),
> + Â Â Â PINCTRL_PIN(186, "PIO APP GPIO 20"),
> + Â Â Â PINCTRL_PIN(187, "P PAD VDD 19"),
> + Â Â Â PINCTRL_PIN(188, "P PAD GND 19"),
> + Â Â Â PINCTRL_PIN(189, "P PAD VSSIO 23"),
> + Â Â Â PINCTRL_PIN(190, "P PAD VDDIO 23"),
> + Â Â Â PINCTRL_PIN(191, "PIO APP GPIO 19"),
> + Â Â Â PINCTRL_PIN(192, "PIO APP GPIO 18"),
> + Â Â Â PINCTRL_PIN(193, "PIO APP GPIO 17"),
> + Â Â Â PINCTRL_PIN(194, "PIO APP GPIO 16"),
> + Â Â Â PINCTRL_PIN(195, "PI CI D1"),
> + Â Â Â PINCTRL_PIN(196, "PI CI D0"),
> + Â Â Â PINCTRL_PIN(197, "PI CI HSYNC"),
> + Â Â Â PINCTRL_PIN(198, "PI CI VSYNC"),
> + Â Â Â PINCTRL_PIN(199, "PI CI EXT CLK"),
> + Â Â Â PINCTRL_PIN(200, "PO CI EXT RST N"),
> + Â Â Â PINCTRL_PIN(201, "P PAD VSSIO 43"),
> + Â Â Â PINCTRL_PIN(202, "P PAD VDDIO 43"),
> + Â Â Â PINCTRL_PIN(203, "PI CI D6"),
> + Â Â Â PINCTRL_PIN(204, "PI CI D7"),
> + Â Â Â PINCTRL_PIN(205, "PI CI D2"),
> + Â Â Â PINCTRL_PIN(206, "PI CI D3"),
> + Â Â Â PINCTRL_PIN(207, "PI CI D4"),
> + Â Â Â PINCTRL_PIN(208, "PI CI D5"),
> + Â Â Â PINCTRL_PIN(209, "PI CI D8"),
> + Â Â Â PINCTRL_PIN(210, "PI CI D9"),
> + Â Â Â PINCTRL_PIN(211, "P PAD VDD 20"),
> + Â Â Â PINCTRL_PIN(212, "P PAD GND 20"),
> + Â Â Â PINCTRL_PIN(213, "P PAD VSSIO 24"),
> + Â Â Â PINCTRL_PIN(214, "P PAD VDDIO 24"),
> + Â Â Â PINCTRL_PIN(215, "P PAD VDDIO 26"),
> + Â Â Â PINCTRL_PIN(216, "PO EMIF 1 A26"),
> + Â Â Â PINCTRL_PIN(217, "PO EMIF 1 A25"),
> + Â Â Â PINCTRL_PIN(218, "P PAD VSSIO 26"),
> + Â Â Â PINCTRL_PIN(219, "PO EMIF 1 A24"),
> + Â Â Â PINCTRL_PIN(220, "PO EMIF 1 A23"),
> + Â Â Â /* Pads along the bottom edge of the chip */
> + Â Â Â PINCTRL_PIN(221, "PO EMIF 1 A22"),
> + Â Â Â PINCTRL_PIN(222, "PO EMIF 1 A21"),
> + Â Â Â PINCTRL_PIN(223, "P PAD VDD 21"),
> + Â Â Â PINCTRL_PIN(224, "P PAD GND 21"),
> + Â Â Â PINCTRL_PIN(225, "P PAD VSSIO 27"),
> + Â Â Â PINCTRL_PIN(226, "P PAD VDDIO 27"),
> + Â Â Â PINCTRL_PIN(227, "PO EMIF 1 A20"),
> + Â Â Â PINCTRL_PIN(228, "PO EMIF 1 A19"),
> + Â Â Â PINCTRL_PIN(229, "PO EMIF 1 A18"),
> + Â Â Â PINCTRL_PIN(230, "PO EMIF 1 A17"),
> + Â Â Â PINCTRL_PIN(231, "P PAD VDDIO 28"),
> + Â Â Â PINCTRL_PIN(232, "P PAD VSSIO 28"),
> + Â Â Â PINCTRL_PIN(233, "PO EMIF 1 A16"),
> + Â Â Â PINCTRL_PIN(234, "PIO EMIF 1 D15"),
> + Â Â Â PINCTRL_PIN(235, "PO EMIF 1 A15"),
> + Â Â Â PINCTRL_PIN(236, "PIO EMIF 1 D14"),
> + Â Â Â PINCTRL_PIN(237, "P PAD VDD 22"),
> + Â Â Â PINCTRL_PIN(238, "P PAD GND 22"),
> + Â Â Â PINCTRL_PIN(239, "P PAD VSSIO 29"),
> + Â Â Â PINCTRL_PIN(240, "P PAD VDDIO 29"),
> + Â Â Â PINCTRL_PIN(241, "PO EMIF 1 A14"),
> + Â Â Â PINCTRL_PIN(242, "PIO EMIF 1 D13"),
> + Â Â Â PINCTRL_PIN(243, "PO EMIF 1 A13"),
> + Â Â Â PINCTRL_PIN(244, "PIO EMIF 1 D12"),
> + Â Â Â PINCTRL_PIN(245, "P PAD VSSIO 30"),
> + Â Â Â PINCTRL_PIN(246, "P PAD VDDIO 30"),
> + Â Â Â PINCTRL_PIN(247, "PO EMIF 1 A12"),
> + Â Â Â PINCTRL_PIN(248, "PIO EMIF 1 D11"),
> + Â Â Â PINCTRL_PIN(249, "PO EMIF 1 A11"),
> + Â Â Â PINCTRL_PIN(250, "PIO EMIF 1 D10"),
> + Â Â Â PINCTRL_PIN(251, "P PAD VSSIO 31"),
> + Â Â Â PINCTRL_PIN(252, "P PAD VDDIO 31"),
> + Â Â Â PINCTRL_PIN(253, "PO EMIF 1 A10"),
> + Â Â Â PINCTRL_PIN(254, "PIO EMIF 1 D09"),
> + Â Â Â PINCTRL_PIN(255, "PO EMIF 1 A09"),
> + Â Â Â PINCTRL_PIN(256, "P PAD VDDIO 32"),
> + Â Â Â PINCTRL_PIN(257, "P PAD VSSIO 32"),
> + Â Â Â PINCTRL_PIN(258, "P PAD GND 24"),
> + Â Â Â PINCTRL_PIN(259, "P PAD VDD 24"),
> + Â Â Â PINCTRL_PIN(260, "PIO EMIF 1 D08"),
> + Â Â Â PINCTRL_PIN(261, "PO EMIF 1 A08"),
> + Â Â Â PINCTRL_PIN(262, "PIO EMIF 1 D07"),
> + Â Â Â PINCTRL_PIN(263, "PO EMIF 1 A07"),
> + Â Â Â PINCTRL_PIN(264, "P PAD VDDIO 33"),
> + Â Â Â PINCTRL_PIN(265, "P PAD VSSIO 33"),
> + Â Â Â PINCTRL_PIN(266, "PIO EMIF 1 D06"),
> + Â Â Â PINCTRL_PIN(267, "PO EMIF 1 A06"),
> + Â Â Â PINCTRL_PIN(268, "PIO EMIF 1 D05"),
> + Â Â Â PINCTRL_PIN(269, "PO EMIF 1 A05"),
> + Â Â Â PINCTRL_PIN(270, "P PAD VDDIO 34"),
> + Â Â Â PINCTRL_PIN(271, "P PAD VSSIO 34"),
> + Â Â Â PINCTRL_PIN(272, "PIO EMIF 1 D04"),
> + Â Â Â PINCTRL_PIN(273, "PO EMIF 1 A04"),
> + Â Â Â PINCTRL_PIN(274, "PIO EMIF 1 D03"),
> + Â Â Â PINCTRL_PIN(275, "PO EMIF 1 A03"),
> + Â Â Â PINCTRL_PIN(276, "P PAD VDDIO 35"),
> + Â Â Â PINCTRL_PIN(277, "P PAD VSSIO 35"),
> + Â Â Â PINCTRL_PIN(278, "P PAD GND 23"),
> + Â Â Â PINCTRL_PIN(279, "P PAD VDD 23"),
> + Â Â Â PINCTRL_PIN(280, "PIO EMIF 1 D02"),
> + Â Â Â PINCTRL_PIN(281, "PO EMIF 1 A02"),
> + Â Â Â PINCTRL_PIN(282, "PIO EMIF 1 D01"),
> + Â Â Â PINCTRL_PIN(283, "PO EMIF 1 A01"),
> + Â Â Â PINCTRL_PIN(284, "P PAD VDDIO 36"),
> + Â Â Â PINCTRL_PIN(285, "P PAD VSSIO 36"),
> + Â Â Â PINCTRL_PIN(286, "PIO EMIF 1 D00"),
> + Â Â Â PINCTRL_PIN(287, "PO EMIF 1 BE1 N"),
> + Â Â Â PINCTRL_PIN(288, "PO EMIF 1 BE0 N"),
> + Â Â Â PINCTRL_PIN(289, "PO EMIF 1 ADV N"),
> + Â Â Â PINCTRL_PIN(290, "P PAD VDDIO 37"),
> + Â Â Â PINCTRL_PIN(291, "P PAD VSSIO 37"),
> + Â Â Â PINCTRL_PIN(292, "PO EMIF 1 SD CKE0"),
> + Â Â Â PINCTRL_PIN(293, "PO EMIF 1 OE N"),
> + Â Â Â PINCTRL_PIN(294, "PO EMIF 1 WE N"),
> + Â Â Â PINCTRL_PIN(295, "P PAD VDDIO 38"),
> + Â Â Â PINCTRL_PIN(296, "P PAD VSSIO 38"),
> + Â Â Â PINCTRL_PIN(297, "PO EMIF 1 CLK"),
> + Â Â Â PINCTRL_PIN(298, "PIO EMIF 1 SD CLK"),
> + Â Â Â PINCTRL_PIN(299, "P PAD VSSIO 45 (not bonded)"),
> + Â Â Â PINCTRL_PIN(300, "P PAD VDDIO 42"),
> + Â Â Â PINCTRL_PIN(301, "P PAD VSSIO 42"),
> + Â Â Â PINCTRL_PIN(302, "P PAD GND 31"),
> + Â Â Â PINCTRL_PIN(303, "P PAD VDD 31"),
> + Â Â Â PINCTRL_PIN(304, "PI EMIF 1 RET CLK"),
> + Â Â Â PINCTRL_PIN(305, "PI EMIF 1 WAIT N"),
> + Â Â Â PINCTRL_PIN(306, "PI EMIF 1 NFIF READY"),
> + Â Â Â PINCTRL_PIN(307, "PO EMIF 1 SD CKE1"),
> + Â Â Â PINCTRL_PIN(308, "PO EMIF 1 CS3 N"),
> + Â Â Â PINCTRL_PIN(309, "P PAD VDD 25"),
> + Â Â Â PINCTRL_PIN(310, "P PAD GND 25"),
> + Â Â Â PINCTRL_PIN(311, "P PAD VSSIO 39"),
> + Â Â Â PINCTRL_PIN(312, "P PAD VDDIO 39"),
> + Â Â Â PINCTRL_PIN(313, "PO EMIF 1 CS2 N"),
> + Â Â Â PINCTRL_PIN(314, "PO EMIF 1 CS1 N"),
> + Â Â Â PINCTRL_PIN(315, "PO EMIF 1 CS0 N"),
> + Â Â Â PINCTRL_PIN(316, "PO ETM TRACE PKT0"),
> + Â Â Â PINCTRL_PIN(317, "PO ETM TRACE PKT1"),
> + Â Â Â PINCTRL_PIN(318, "PO ETM TRACE PKT2"),
> + Â Â Â PINCTRL_PIN(319, "P PAD VDD 30"),
> + Â Â Â PINCTRL_PIN(320, "P PAD GND 30"),
> + Â Â Â PINCTRL_PIN(321, "P PAD VSSIO 44"),
> + Â Â Â PINCTRL_PIN(322, "P PAD VDDIO 44"),
> + Â Â Â PINCTRL_PIN(323, "PO ETM TRACE PKT3"),
> + Â Â Â PINCTRL_PIN(324, "PO ETM TRACE PKT4"),
> + Â Â Â PINCTRL_PIN(325, "PO ETM TRACE PKT5"),
> + Â Â Â PINCTRL_PIN(326, "PO ETM TRACE PKT6"),
> + Â Â Â PINCTRL_PIN(327, "PO ETM TRACE PKT7"),
> + Â Â Â PINCTRL_PIN(328, "PO ETM PIPE STAT0"),
> + Â Â Â PINCTRL_PIN(329, "P PAD VDD 26"),
> + Â Â Â PINCTRL_PIN(330, "P PAD GND 26"),
> + Â Â Â PINCTRL_PIN(331, "P PAD VSSIO 40"),
> + Â Â Â PINCTRL_PIN(332, "P PAD VDDIO 40"),
> + Â Â Â PINCTRL_PIN(333, "PO ETM PIPE STAT1"),
> + Â Â Â PINCTRL_PIN(334, "PO ETM PIPE STAT2"),
> + Â Â Â PINCTRL_PIN(335, "PO ETM TRACE CLK"),
> + Â Â Â PINCTRL_PIN(336, "PO ETM TRACE SYNC"),
> + Â Â Â PINCTRL_PIN(337, "PIO ACC GPIO 33"),
> + Â Â Â PINCTRL_PIN(338, "PIO ACC GPIO 32"),
> + Â Â Â PINCTRL_PIN(339, "PIO ACC GPIO 30"),
> + Â Â Â PINCTRL_PIN(340, "PIO ACC GPIO 29"),
> + Â Â Â PINCTRL_PIN(341, "P PAD VDDIO 17"),
> + Â Â Â PINCTRL_PIN(342, "P PAD VSSIO 17"),
> + Â Â Â PINCTRL_PIN(343, "P PAD GND 15"),
> + Â Â Â PINCTRL_PIN(344, "P PAD VDD 15"),
> + Â Â Â PINCTRL_PIN(345, "PIO ACC GPIO 28"),
> + Â Â Â PINCTRL_PIN(346, "PIO ACC GPIO 27"),
> + Â Â Â PINCTRL_PIN(347, "PIO ACC GPIO 16"),
> + Â Â Â PINCTRL_PIN(348, "PI TAP TMS"),
> + Â Â Â PINCTRL_PIN(349, "PI TAP TDI"),
> + Â Â Â PINCTRL_PIN(350, "PO TAP TDO"),
> + Â Â Â PINCTRL_PIN(351, "PI TAP RST N"),
> + Â Â Â /* Pads along the left edge of the chip */
> + Â Â Â PINCTRL_PIN(352, "PI EMU MODE 0"),
> + Â Â Â PINCTRL_PIN(353, "PO TAP RET CLK"),
> + Â Â Â PINCTRL_PIN(354, "PI TAP CLK"),
> + Â Â Â PINCTRL_PIN(355, "PO EMIF 0 SD CS N"),
> + Â Â Â PINCTRL_PIN(356, "PO EMIF 0 SD CAS N"),
> + Â Â Â PINCTRL_PIN(357, "PO EMIF 0 SD WE N"),
> + Â Â Â PINCTRL_PIN(358, "P PAD VDDIO 1"),
> + Â Â Â PINCTRL_PIN(359, "P PAD VSSIO 1"),
> + Â Â Â PINCTRL_PIN(360, "P PAD GND 1"),
> + Â Â Â PINCTRL_PIN(361, "P PAD VDD 1"),
> + Â Â Â PINCTRL_PIN(362, "PO EMIF 0 SD CKE"),
> + Â Â Â PINCTRL_PIN(363, "PO EMIF 0 SD DQML"),
> + Â Â Â PINCTRL_PIN(364, "PO EMIF 0 SD DQMU"),
> + Â Â Â PINCTRL_PIN(365, "PO EMIF 0 SD RAS N"),
> + Â Â Â PINCTRL_PIN(366, "PIO EMIF 0 D15"),
> + Â Â Â PINCTRL_PIN(367, "PO EMIF 0 A15"),
> + Â Â Â PINCTRL_PIN(368, "PIO EMIF 0 D14"),
> + Â Â Â PINCTRL_PIN(369, "PO EMIF 0 A14"),
> + Â Â Â PINCTRL_PIN(370, "PIO EMIF 0 D13"),
> + Â Â Â PINCTRL_PIN(371, "PO EMIF 0 A13"),
> + Â Â Â PINCTRL_PIN(372, "P PAD VDDIO 2"),
> + Â Â Â PINCTRL_PIN(373, "P PAD VSSIO 2"),
> + Â Â Â PINCTRL_PIN(374, "P PAD GND 2"),
> + Â Â Â PINCTRL_PIN(375, "P PAD VDD 2"),
> + Â Â Â PINCTRL_PIN(376, "PIO EMIF 0 D12"),
> + Â Â Â PINCTRL_PIN(377, "PO EMIF 0 A12"),
> + Â Â Â PINCTRL_PIN(378, "PIO EMIF 0 D11"),
> + Â Â Â PINCTRL_PIN(379, "PO EMIF 0 A11"),
> + Â Â Â PINCTRL_PIN(380, "PIO EMIF 0 D10"),
> + Â Â Â PINCTRL_PIN(381, "PO EMIF 0 A10"),
> + Â Â Â PINCTRL_PIN(382, "PIO EMIF 0 D09"),
> + Â Â Â PINCTRL_PIN(383, "PO EMIF 0 A09"),
> + Â Â Â PINCTRL_PIN(384, "PIO EMIF 0 D08"),
> + Â Â Â PINCTRL_PIN(385, "PO EMIF 0 A08"),
> + Â Â Â PINCTRL_PIN(386, "PIO EMIF 0 D07"),
> + Â Â Â PINCTRL_PIN(387, "PO EMIF 0 A07"),
> + Â Â Â PINCTRL_PIN(388, "P PAD VDDIO 3"),
> + Â Â Â PINCTRL_PIN(389, "P PAD VSSIO 3"),
> + Â Â Â PINCTRL_PIN(390, "P PAD GND 3"),
> + Â Â Â PINCTRL_PIN(391, "P PAD VDD 3"),
> + Â Â Â PINCTRL_PIN(392, "PO EFUSE RDOUT1"),
> + Â Â Â PINCTRL_PIN(393, "PIO EMIF 0 D06"),
> + Â Â Â PINCTRL_PIN(394, "PO EMIF 0 A06"),
> + Â Â Â PINCTRL_PIN(395, "PIO EMIF 0 D05"),
> + Â Â Â PINCTRL_PIN(396, "PO EMIF 0 A05"),
> + Â Â Â PINCTRL_PIN(397, "PIO EMIF 0 D04"),
> + Â Â Â PINCTRL_PIN(398, "PO EMIF 0 A04"),
> + Â Â Â PINCTRL_PIN(399, "A PADS/A VDDCO1v82v5 GND 80U SF LIN VDDCO AF"),
> + Â Â Â PINCTRL_PIN(400, "PWR VDDCO AF"),
> + Â Â Â PINCTRL_PIN(401, "PWR EFUSE HV1"),
> + Â Â Â PINCTRL_PIN(402, "P PAD VSSIO 4"),
> + Â Â Â PINCTRL_PIN(403, "P PAD VDDIO 4"),
> + Â Â Â PINCTRL_PIN(404, "P PAD GND 4"),
> + Â Â Â PINCTRL_PIN(405, "P PAD VDD 4"),
> + Â Â Â PINCTRL_PIN(406, "PIO EMIF 0 D03"),
> + Â Â Â PINCTRL_PIN(407, "PO EMIF 0 A03"),
> + Â Â Â PINCTRL_PIN(408, "PWR EFUSE HV2"),
> + Â Â Â PINCTRL_PIN(409, "PWR EFUSE HV3"),
> + Â Â Â PINCTRL_PIN(410, "PIO EMIF 0 D02"),
> + Â Â Â PINCTRL_PIN(411, "PO EMIF 0 A02"),
> + Â Â Â PINCTRL_PIN(412, "PIO EMIF 0 D01"),
> + Â Â Â PINCTRL_PIN(413, "P PAD VDDIO 5"),
> + Â Â Â PINCTRL_PIN(414, "P PAD VSSIO 5"),
> + Â Â Â PINCTRL_PIN(415, "P PAD GND 5"),
> + Â Â Â PINCTRL_PIN(416, "P PAD VDD 5"),
> + Â Â Â PINCTRL_PIN(417, "PO EMIF 0 A01"),
> + Â Â Â PINCTRL_PIN(418, "PIO EMIF 0 D00"),
> + Â Â Â PINCTRL_PIN(419, "IF 0 SD CLK"),
> + Â Â Â PINCTRL_PIN(420, "APP SPI CLK"),
> + Â Â Â PINCTRL_PIN(421, "APP SPI DO"),
> + Â Â Â PINCTRL_PIN(422, "APP SPI DI"),
> + Â Â Â PINCTRL_PIN(423, "APP SPI CS0"),
> + Â Â Â PINCTRL_PIN(424, "APP SPI CS1"),
> + Â Â Â PINCTRL_PIN(425, "APP SPI CS2"),
> + Â Â Â PINCTRL_PIN(426, "PIO APP GPIO 10"),
> + Â Â Â PINCTRL_PIN(427, "P PAD VDDIO 41"),
> + Â Â Â PINCTRL_PIN(428, "P PAD VSSIO 41"),
> + Â Â Â PINCTRL_PIN(429, "P PAD GND 6"),
> + Â Â Â PINCTRL_PIN(430, "P PAD VDD 6"),
> + Â Â Â PINCTRL_PIN(431, "PIO ACC SDIO0 CMD"),
> + Â Â Â PINCTRL_PIN(432, "PIO ACC SDIO0 CK"),
> + Â Â Â PINCTRL_PIN(433, "PIO ACC SDIO0 D3"),
> + Â Â Â PINCTRL_PIN(434, "PIO ACC SDIO0 D2"),
> + Â Â Â PINCTRL_PIN(435, "PIO ACC SDIO0 D1"),
> + Â Â Â PINCTRL_PIN(436, "PIO ACC SDIO0 D0"),
> + Â Â Â PINCTRL_PIN(437, "PIO USB PU"),
> + Â Â Â PINCTRL_PIN(438, "PIO USB SP"),
> + Â Â Â PINCTRL_PIN(439, "PIO USB DAT VP"),
> + Â Â Â PINCTRL_PIN(440, "PIO USB SE0 VM"),
> + Â Â Â PINCTRL_PIN(441, "PIO USB OE"),
> + Â Â Â PINCTRL_PIN(442, "PIO USB SUSP"),
> + Â Â Â PINCTRL_PIN(443, "P PAD VSSIO 6"),
> + Â Â Â PINCTRL_PIN(444, "P PAD VDDIO 6"),
> + Â Â Â PINCTRL_PIN(445, "PIO USB PUEN"),
> + Â Â Â PINCTRL_PIN(446, "PIO ACC UART0 RX"),
> + Â Â Â PINCTRL_PIN(447, "PIO ACC UART0 TX"),
> + Â Â Â PINCTRL_PIN(448, "PIO ACC UART0 CTS"),
> + Â Â Â PINCTRL_PIN(449, "PIO ACC UART0 RTS"),
> + Â Â Â PINCTRL_PIN(450, "PIO ACC UART3 RX"),
> + Â Â Â PINCTRL_PIN(451, "PIO ACC UART3 TX"),
> + Â Â Â PINCTRL_PIN(452, "PIO ACC UART3 CTS"),
> + Â Â Â PINCTRL_PIN(453, "PIO ACC UART3 RTS"),
> + Â Â Â PINCTRL_PIN(454, "PIO ACC IRDA TX"),
> + Â Â Â PINCTRL_PIN(455, "P PAD VDDIO 7"),
> + Â Â Â PINCTRL_PIN(456, "P PAD VSSIO 7"),
> + Â Â Â PINCTRL_PIN(457, "P PAD GND 7"),
> + Â Â Â PINCTRL_PIN(458, "P PAD VDD 7"),
> + Â Â Â PINCTRL_PIN(459, "PIO ACC IRDA RX"),
> + Â Â Â PINCTRL_PIN(460, "PIO ACC PCM I2S CLK"),
> + Â Â Â PINCTRL_PIN(461, "PIO ACC PCM I2S WS"),
> + Â Â Â PINCTRL_PIN(462, "PIO ACC PCM I2S DATA A"),
> + Â Â Â PINCTRL_PIN(463, "PIO ACC PCM I2S DATA B"),
> + Â Â Â PINCTRL_PIN(464, "PO SIM CLK"),
> + Â Â Â PINCTRL_PIN(465, "PIO ACC IRDA SD"),
> + Â Â Â PINCTRL_PIN(466, "PIO SIM DATA"),
> +};
> +
> +/**
> + * @dev: a pointer back to containing device
> + * @virtbase: the offset to the controller in virtual memory
> + */
> +struct u300_pmx {
> + Â Â Â struct device *dev;
> + Â Â Â struct pinctrl_dev *pctl;
> + Â Â Â u32 phybase;
> + Â Â Â u32 physize;
> + Â Â Â void __iomem *virtbase;
> +};
> +
> +/**
> + * u300_pmx_registers - the array of registers read/written for each pinmux
> + * shunt setting
> + */
> +const u32 u300_pmx_registers[] = {
> + Â Â Â U300_SYSCON_PMC1LR,
> + Â Â Â U300_SYSCON_PMC1HR,
> + Â Â Â U300_SYSCON_PMC2R,
> + Â Â Â U300_SYSCON_PMC3R,
> + Â Â Â U300_SYSCON_PMC4R,
> +};
> +
> +/**
> + * struct u300_pin_group - describes a U300 pin group
> + * @name: the name of this specific pin group
> + * @pins: an array of discrete physical pins used in this group, taken
> + * Â Â from the driver-local pin enumeration space
> + * @num_pins: the number of pins in this group array, i.e. the number of
> + * Â Â elements in .pins so we can iterate over that array
> + */
> +struct u300_pin_group {
> + Â Â Â const char *name;
> + Â Â Â const unsigned int *pins;
> + Â Â Â const unsigned num_pins;
> +};
> +
> +/**
> + * struct pmx_onmask - mask bits to enable/disable padmux
> + * @mask: mask bits to disable
> + * @val: mask bits to enable
> + *
> + * onmask lazy dog:
> + * onmask = {
> + * Â {"PMC1LR" mask, "PMC1LR" value},
> + * Â {"PMC1HR" mask, "PMC1HR" value},
> + * Â {"PMC2R" Âmask, "PMC2R" Âvalue},
> + * Â {"PMC3R" Âmask, "PMC3R" Âvalue},
> + * Â {"PMC4R" Âmask, "PMC4R" Âvalue}
> + * }
> + */
> +struct u300_pmx_mask {
> + Â Â Â u16 mask;
> + Â Â Â u16 bits;
> +};
> +
> +/* The chip power pins are VDD, GND, VDDIO and VSSIO */
> +static const unsigned power_pins[] = { 0, 1, 3, 31, 46, 47, 49, 50, 61, 62, 63,
> + Â Â Â 64, 78, 79, 80, 81, 92, 93, 94, 95, 101, 102, 103, 104, 115, 116, 117,
> + Â Â Â 118, 130, 131, 132, 133, 145, 146, 147, 148, 159, 160, 172, 173, 174,
> + Â Â Â 175, 187, 188, 189, 190, 201, 202, 211, 212, 213, 214, 215, 218, 223,
> + Â Â Â 224, 225, 226, 231, 232, 237, 238, 239, 240, 245, 246, 251, 252, 256,
> + Â Â Â 257, 258, 259, 264, 265, 270, 271, 276, 277, 278, 279, 284, 285, 290,
> + Â Â Â 291, 295, 296, 299, 300, 301, 302, 303, 309, 310, 311, 312, 319, 320,
> + Â Â Â 321, 322, 329, 330, 331, 332, 341, 342, 343, 344, 358, 359, 360, 361,
> + Â Â Â 372, 373, 374, 375, 388, 389, 390, 391, 402, 403, 404, 405, 413, 414,
> + Â Â Â 415, 416, 427, 428, 429, 430, 443, 444, 455, 456, 457, 458 };
> +static const unsigned emif0_pins[] = { 355, 356, 357, 362, 363, 364, 365, 366,
> + Â Â Â 367, 368, 369, 370, 371, 376, 377, 378, 379, 380, 381, 382, 383, 384,
> + Â Â Â 385, 386, 387, 393, 394, 395, 396, 397, 398, 406, 407, 410, 411, 412,
> + Â Â Â 417, 418 };
> +static const unsigned emif1_pins[] = { 216, 217, 219, 220, 221, 222, 227, 228,
> + Â Â Â 229, 230, 233, 234, 235, 236, 241, 242, 243, 244, 247, 248, 249, 250,
> + Â Â Â 253, 254, 255, 260, 261, 262, 263, 266, 267, 268, 269, 272, 273, 274,
> + Â Â Â 275, 280, 281, 282, 283, 286, 287, 288, 289, 292, 293, 294, 297, 298,
> + Â Â Â 304, 305, 306, 307, 308, 313, 314, 315 };
> +static const unsigned uart0_pins[] = { 134, 135, 136, 137 };
> +static const unsigned mmc0_pins[] = { 166, 167, 168, 169, 170, 171, 176, 177 };
> +static const unsigned spi0_pins[] = { 420, 421, 422, 423, 424, 425 };
> +
> +static const struct u300_pmx_mask emif0_mask[] = {
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> +};
> +
> +static const struct u300_pmx_mask emif1_mask[] = {
> + Â Â Â /*
> + Â Â Â Â* This connects the SDRAM to CS2 and a NAND flash to
> + Â Â Â Â* CS0 on the EMIF.
> + Â Â Â Â*/
> + Â Â Â {
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_MASK,
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1LR_EMIF_1_SDRAM0
> + Â Â Â },
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> +};
> +
> +static const struct u300_pmx_mask uart0_mask[] = {
> + Â Â Â {0, 0},
> + Â Â Â {
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_UART0_1_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_UART0_2_MASK,
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_UART0_1_UART0 |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_UART0_2_UART0
> + Â Â Â },
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> +};
> +
> +static const struct u300_pmx_mask mmc0_mask[] = {
> + Â Â Â { U300_SYSCON_PMC1LR_MMCSD_MASK, U300_SYSCON_PMC1LR_MMCSD_MMCSD},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â { U300_SYSCON_PMC4R_APP_MISC_12_MASK,
> + Â Â Â Â U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO }
> +};
> +
> +static const struct u300_pmx_mask spi0_mask[] = {
> + Â Â Â {0, 0},
> + Â Â Â {
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
> + Â Â Â Â Â Â Â U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI
> + Â Â Â },
> + Â Â Â {0, 0},
> + Â Â Â {0, 0},
> + Â Â Â {0, 0}
> +};
> +
> +static const struct u300_pin_group u300_pin_groups[] = {
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "powergrp",
> + Â Â Â Â Â Â Â .pins = power_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(power_pins),
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "emif0grp",
> + Â Â Â Â Â Â Â .pins = emif0_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(emif0_pins),
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "emif1grp",
> + Â Â Â Â Â Â Â .pins = emif1_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(emif1_pins),
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "uart0grp",
> + Â Â Â Â Â Â Â .pins = uart0_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(uart0_pins),
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "mmc0grp",
> + Â Â Â Â Â Â Â .pins = mmc0_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(mmc0_pins),
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "spi0grp",
> + Â Â Â Â Â Â Â .pins = spi0_pins,
> + Â Â Â Â Â Â Â .num_pins = ARRAY_SIZE(spi0_pins),
> + Â Â Â },
> +};
> +
> +static int u300_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
> +{
> + Â Â Â if (selector >= ARRAY_SIZE(u300_pin_groups))
> + Â Â Â Â Â Â Â return -EINVAL;
> + Â Â Â return 0;
> +}
> +
> +static const char *u300_get_group_name(struct pinctrl_dev *pctldev,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned selector)
> +{
> + Â Â Â if (selector >= ARRAY_SIZE(u300_pin_groups))
> + Â Â Â Â Â Â Â return NULL;
> + Â Â Â return u300_pin_groups[selector].name;
> +}
> +
> +static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned ** const pins,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned * const num_pins)
> +{
> + Â Â Â if (selector >= ARRAY_SIZE(u300_pin_groups))
> + Â Â Â Â Â Â Â return -EINVAL;
> + Â Â Â *pins = (unsigned *) u300_pin_groups[selector].pins;
> + Â Â Â *num_pins = u300_pin_groups[selector].num_pins;
> + Â Â Â return 0;
> +}
> +
> +static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
> + Â Â Â Â Â Â Â Â Âunsigned offset)
> +{
> + Â Â Â seq_printf(s, " " DRIVER_NAME);
> +}
> +
> +static struct pinctrl_ops u300_pctrl_ops = {
> + Â Â Â .list_groups = u300_list_groups,
> + Â Â Â .get_group_name = u300_get_group_name,
> + Â Â Â .get_group_pins = u300_get_group_pins,
> + Â Â Â .pin_dbg_show = u300_pin_dbg_show,
> +};
> +
> +/*
> + * Here we define the available functions and their corresponding pin groups
> + */
> +
> +/**
> + * struct u300_pmx_func - describes U300 pinmux functions
> + * @name: the name of this specific function
> + * @groups: corresponding pin groups
> + * @onmask: bits to set to enable this when doing pin muxing
> + */
> +struct u300_pmx_func {
> + Â Â Â const char *name;
> + Â Â Â const char * const *groups;
> + Â Â Â const unsigned num_groups;
> + Â Â Â const struct u300_pmx_mask *mask;
> +};
> +
> +static const char * const powergrps[] = { "powergrp" };
> +static const char * const emif0grps[] = { "emif0grp" };
> +static const char * const emif1grps[] = { "emif1grp" };
> +static const char * const uart0grps[] = { "uart0grp" };
> +static const char * const mmc0grps[] = { "mmc0grp" };
> +static const char * const spi0grps[] = { "spi0grp" };
> +
> +static const struct u300_pmx_func u300_pmx_functions[] = {
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "power",
> + Â Â Â Â Â Â Â .groups = powergrps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(powergrps),
> + Â Â Â Â Â Â Â /* Mask is N/A */
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "emif0",
> + Â Â Â Â Â Â Â .groups = emif0grps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(emif0grps),
> + Â Â Â Â Â Â Â .mask = emif0_mask,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "emif1",
> + Â Â Â Â Â Â Â .groups = emif1grps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(emif1grps),
> + Â Â Â Â Â Â Â .mask = emif1_mask,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "uart0",
> + Â Â Â Â Â Â Â .groups = uart0grps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(uart0grps),
> + Â Â Â Â Â Â Â .mask = uart0_mask,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "mmc0",
> + Â Â Â Â Â Â Â .groups = mmc0grps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(mmc0grps),
> + Â Â Â Â Â Â Â .mask = mmc0_mask,
> + Â Â Â },
> + Â Â Â {
> + Â Â Â Â Â Â Â .name = "spi0",
> + Â Â Â Â Â Â Â .groups = spi0grps,
> + Â Â Â Â Â Â Â .num_groups = ARRAY_SIZE(spi0grps),
> + Â Â Â Â Â Â Â .mask = spi0_mask,
> + Â Â Â },
> +};
> +
> +static void u300_pmx_endisable(struct u300_pmx *upmx, unsigned selector,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âbool enable)
> +{
> + Â Â Â u16 regval, val, mask;
> + Â Â Â int i;
> +
> + Â Â Â for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) {
> + Â Â Â Â Â Â Â if (enable)
> + Â Â Â Â Â Â Â Â Â Â Â val = u300_pmx_functions[selector].mask->bits;
> + Â Â Â Â Â Â Â else
> + Â Â Â Â Â Â Â Â Â Â Â val = 0;
> +
> + Â Â Â Â Â Â Â mask = u300_pmx_functions[selector].mask->mask;
> + Â Â Â Â Â Â Â if (mask != 0) {
> + Â Â Â Â Â Â Â Â Â Â Â regval = readw(upmx->virtbase + u300_pmx_registers[i]);
> + Â Â Â Â Â Â Â Â Â Â Â regval &= ~mask;
> + Â Â Â Â Â Â Â Â Â Â Â regval |= val;
> + Â Â Â Â Â Â Â Â Â Â Â writew(regval, upmx->virtbase + u300_pmx_registers[i]);
> + Â Â Â Â Â Â Â }
> + Â Â Â }
> +}
> +
> +static int u300_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
> + Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned group)
> +{
> + Â Â Â struct u300_pmx *upmx;
> +
> + Â Â Â /* There is nothing to do with the power pins */
> + Â Â Â if (selector == 0)
> + Â Â Â Â Â Â Â return 0;
> +
> + Â Â Â upmx = pctldev_get_drvdata(pctldev);
> + Â Â Â u300_pmx_endisable(upmx, selector, true);
> +
> + Â Â Â return 0;
> +}
> +
> +static void u300_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned group)
> +{
> + Â Â Â struct u300_pmx *upmx;
> +
> + Â Â Â /* There is nothing to do with the power pins */
> + Â Â Â if (selector == 0)
> + Â Â Â Â Â Â Â return;
> +
> + Â Â Â upmx = pctldev_get_drvdata(pctldev);
> + Â Â Â u300_pmx_endisable(upmx, selector, false);
> +}
> +
> +static int u300_pmx_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
> +{
> + Â Â Â if (selector >= ARRAY_SIZE(u300_pmx_functions))
> + Â Â Â Â Â Â Â return -EINVAL;
> + Â Â Â return 0;
> +}
> +
> +static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â unsigned selector)
> +{
> + Â Â Â return u300_pmx_functions[selector].name;
> +}
> +
> +static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âconst char * const **groups,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Âunsigned * const num_groups)
> +{
> + Â Â Â *groups = u300_pmx_functions[selector].groups;
> + Â Â Â *num_groups = u300_pmx_functions[selector].num_groups;
> + Â Â Â return 0;
> +}
> +
> +static struct pinmux_ops u300_pmx_ops = {
> + Â Â Â .list_functions = u300_pmx_list_funcs,
> + Â Â Â .get_function_name = u300_pmx_get_func_name,
> + Â Â Â .get_function_groups = u300_pmx_get_groups,
> + Â Â Â .enable = u300_pmx_enable,
> + Â Â Â .disable = u300_pmx_disable,
> +};
> +
> +/*
> + * FIXME: this will be set to sane values as this driver engulfs
> + * drivers/gpio/gpio-u300.c and we really know this stuff.
> + */
> +static struct pinctrl_gpio_range u300_gpio_range = {
> + Â Â Â .name = "COH901*",
> + Â Â Â .id = 0,
> + Â Â Â .base = 0,
> + Â Â Â .npins = 64,
> +};
> +
> +static struct pinctrl_desc u300_pmx_desc = {
> + Â Â Â .name = DRIVER_NAME,
> + Â Â Â .pins = u300_pads,
> + Â Â Â .npins = ARRAY_SIZE(u300_pads),
> + Â Â Â .maxpin = U300_NUM_PADS-1,
> + Â Â Â .pctlops = &u300_pctrl_ops,
> + Â Â Â .pmxops = &u300_pmx_ops,
> + Â Â Â .owner = THIS_MODULE,
> +};
> +
> +static void __init u300_pmx_dumpregs(struct u300_pmx *upmx)
> +{
> + Â Â Â u16 regval;
> + Â Â Â int i;
> +
> + Â Â Â for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) {
> + Â Â Â Â Â Â Â regval = readw(upmx->virtbase + u300_pmx_registers[i]);
> + Â Â Â Â Â Â Â dev_info(upmx->dev, "PMX%u: 0x%04x\n", i, regval);
> + Â Â Â }
> +}

is this a debug information or do you want it to be in mainline?

> +
> +static int __init u300_pmx_probe(struct platform_device *pdev)
> +{
> + Â Â Â int ret;
> + Â Â Â struct u300_pmx *upmx;
> + Â Â Â struct resource *res;
> +
> + Â Â Â /* Create state holders etc for this driver */
> + Â Â Â upmx = devm_kzalloc(&pdev->dev, sizeof(struct u300_pmx), GFP_KERNEL);
> + Â Â Â if (!upmx)
> + Â Â Â Â Â Â Â return -ENOMEM;
> +
> + Â Â Â upmx->dev = &pdev->dev;
> +
> + Â Â Â res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + Â Â Â if (!res) {
> + Â Â Â Â Â Â Â ret = -ENOENT;
> + Â Â Â Â Â Â Â goto out_no_resource;
> + Â Â Â }
> + Â Â Â upmx->phybase = res->start;
> + Â Â Â upmx->physize = resource_size(res);
> +
> + Â Â Â if (request_mem_region(upmx->phybase, upmx->physize,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â ÂDRIVER_NAME) == NULL) {
> + Â Â Â Â Â Â Â ret = -EBUSY;
> + Â Â Â Â Â Â Â goto out_no_memregion;
> + Â Â Â }
> +
> + Â Â Â upmx->virtbase = ioremap(upmx->phybase, upmx->physize);
> + Â Â Â if (!upmx->virtbase) {
> + Â Â Â Â Â Â Â ret = -ENOMEM;
> + Â Â Â Â Â Â Â goto out_no_remap;
> + Â Â Â }
> +
> + Â Â Â upmx->pctl = pinctrl_register(&u300_pmx_desc, &pdev->dev, upmx);
> + Â Â Â if (IS_ERR(upmx->pctl)) {
> + Â Â Â Â Â Â Â dev_err(&pdev->dev, "could not register U300 pinmux driver\n");
> + Â Â Â Â Â Â Â ret = PTR_ERR(upmx->pctl);
> + Â Â Â Â Â Â Â goto out_no_pmx;
> + Â Â Â }
> +
> + Â Â Â /* We will handle a range of GPIO pins */
> + Â Â Â pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_range);
> +
> + Â Â Â platform_set_drvdata(pdev, upmx);
> +
> + Â Â Â u300_pmx_dumpregs(upmx);
> +
> + Â Â Â dev_info(&pdev->dev, "initialized U300 pinmux driver\n");
> +
> + Â Â Â return 0;
> +
> +out_no_pmx:
> + Â Â Â iounmap(upmx->virtbase);
> +out_no_remap:
> + Â Â Â platform_set_drvdata(pdev, NULL);
> +out_no_memregion:
> + Â Â Â release_mem_region(upmx->phybase, upmx->physize);
> +out_no_resource:
> + Â Â Â devm_kfree(&pdev->dev, upmx);
> + Â Â Â return ret;
> +}
> +
> +static int __exit u300_pmx_remove(struct platform_device *pdev)
> +{
> + Â Â Â struct u300_pmx *upmx = platform_get_drvdata(pdev);
> +
> + Â Â Â pinctrl_remove_gpio_range(upmx->pctl, &u300_gpio_range);
> + Â Â Â pinctrl_unregister(upmx->pctl);
> + Â Â Â iounmap(upmx->virtbase);
> + Â Â Â release_mem_region(upmx->phybase, upmx->physize);
> + Â Â Â platform_set_drvdata(pdev, NULL);
> + Â Â Â devm_kfree(&pdev->dev, upmx);
> +
> + Â Â Â return 0;
> +}
> +
> +static struct platform_driver u300_pmx_driver = {
> + Â Â Â .driver = {
> + Â Â Â Â Â Â Â .name = DRIVER_NAME,
> + Â Â Â Â Â Â Â .owner = THIS_MODULE,
> + Â Â Â },
> + Â Â Â .remove = __exit_p(u300_pmx_remove),
> +};
> +
> +static int __init u300_pmx_init(void)
> +{
> + Â Â Â return platform_driver_probe(&u300_pmx_driver, u300_pmx_probe);
> +}
> +arch_initcall(u300_pmx_init);
> +
> +static void __exit u300_pmx_exit(void)
> +{
> + Â Â Â platform_driver_unregister(&u300_pmx_driver);
> +}
> +module_exit(u300_pmx_exit);
> +
> +MODULE_AUTHOR("Linus Walleij <linus.walleij@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("U300 pin control driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.3.2


-barry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/