[PATCH 1/5] rtlwifi: Change PCI drivers to use the new PM framework
From: Larry Finger
Date: Wed Oct 05 2011 - 11:50:24 EST
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/pci.c | 19 ++++---------------
drivers/net/wireless/rtlwifi/pci.h | 4 ++--
drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 16 ++++++++++------
drivers/net/wireless/rtlwifi/rtl8192de/sw.c | 16 ++++++++++------
drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 16 ++++++++++------
5 files changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9983fa1..5380f3b 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1993,36 +1993,25 @@ call rtl_mac_stop() from the mac80211
suspend function first, So there is
no need to call hw_disable here.
****************************************/
-int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+int rtl_pci_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct rtl_priv *rtlpriv = rtl_priv(hw);
rtlpriv->cfg->ops->hw_suspend(hw);
rtl_deinit_rfkill(hw);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
EXPORT_SYMBOL(rtl_pci_suspend);
-int rtl_pci_resume(struct pci_dev *pdev)
+int rtl_pci_resume(struct device *dev)
{
- int ret;
+ struct pci_dev *pdev = to_pci_dev(dev);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct rtl_priv *rtlpriv = rtl_priv(hw);
- pci_set_power_state(pdev, PCI_D0);
- ret = pci_enable_device(pdev);
- if (ret) {
- RT_ASSERT(false, ("ERR: <======\n"));
- return ret;
- }
-
- pci_restore_state(pdev);
-
rtlpriv->cfg->ops->hw_resume(hw);
rtl_init_rfkill(hw);
return 0;
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index a24e505..ebe0b42 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -237,8 +237,8 @@ extern struct rtl_intf_ops rtl_pci_ops;
int __devinit rtl_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id);
void rtl_pci_disconnect(struct pci_dev *pdev);
-int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
-int rtl_pci_resume(struct pci_dev *pdev);
+int rtl_pci_suspend(struct device *dev);
+int rtl_pci_resume(struct device *dev);
static inline u8 pci_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
{
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index b7ecb9e..07a75d3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -365,17 +365,21 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92ce_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92ce_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
static int __init rtl92ce_module_init(void)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
index c681597..12042d8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
@@ -385,17 +385,21 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92de_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92de_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
/* add global spin lock to solve the problem that
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 24bd331..80facb5 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -396,17 +396,21 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+static const struct dev_pm_ops rtlwifi_pm_ops = {
+ .suspend = rtl_pci_suspend,
+ .resume = rtl_pci_resume,
+ .freeze = rtl_pci_suspend,
+ .thaw = rtl_pci_resume,
+ .poweroff = rtl_pci_suspend,
+ .restore = rtl_pci_resume,
+};
+
static struct pci_driver rtl92se_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl92se_pci_ids,
.probe = rtl_pci_probe,
.remove = rtl_pci_disconnect,
-
-#ifdef CONFIG_PM
- .suspend = rtl_pci_suspend,
- .resume = rtl_pci_resume,
-#endif
-
+ .driver.pm = &rtlwifi_pm_ops,
};
static int __init rtl92se_module_init(void)
--
1.7.6.4
--------------080708050201040904080201
Content-Type: text/x-patch;
name="0002-rtlwifi-Update-to-new-Realtek-version-Part-I.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="0002-rtlwifi-Update-to-new-Realtek-version-Part-I.patch"