[PATCH v2 4/4] MFD: twl6040: Fix power on GPIO handling

From: Peter Ujfalusi
Date: Fri Sep 02 2011 - 11:04:30 EST


Avoid requesting the audpwron gpio in case of ES1.0
revision.
In the past we requested the gpio, but we did not
free it up, since we made the check for the revision
later. This results later checks for gpio validity to
fail, leaving the gpio reserved (even after the driver
has been removed).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
drivers/mfd/twl6040-core.c | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 51c3b47..7dc8c47 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -470,7 +470,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, twl6040);

twl6040->dev = &pdev->dev;
- twl6040->audpwron = pdata->audpwron_gpio;
twl6040->irq = pdata->naudint_irq;
twl6040->irq_base = pdata->irq_base;

@@ -480,6 +479,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)

twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);

+ /* ERRATA: Automatic power-up is not possible in ES1.0 */
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
+ twl6040->audpwron = pdata->audpwron_gpio;
+ else
+ twl6040->audpwron = -EINVAL;
+
if (gpio_is_valid(twl6040->audpwron)) {
ret = gpio_request(twl6040->audpwron, "audpwron");
if (ret)
@@ -490,10 +495,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
goto gpio2_err;
}

- /* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040_get_revid(twl6040) == TWL6040_REV_ES1_0)
- twl6040->audpwron = -EINVAL;
-
/* codec interrupt */
ret = twl6040_irq_init(twl6040);
if (ret)
--
1.7.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/