Re: BUG: Bisected Gianfar in bridge not forwarding packets (was:3.0-rc1 Bridge not forwarding unicast packages)

[Michael Guntsche]

On Wed, Aug 10, 2011 at 11:59 AM, Michael Guntsche <mguntsche@xxxxxxxxx> wrote:
<snip>
>>>Offload parameters for lan_wire:
>>>rx-checksumming: off
>>>tx-checksumming: off
>>>scatter-gather: off
>>>tcp-segmentation-offload: off
>>>udp-fragmentation-offload: off
>>>generic-segmentation-offload: off
>>>generic-receive-offload: on
>>>large-receive-offload: off
>>>rx-vlan-offload: off
>>>tx-vlan-offload: off
>>>ntuple-filters: off
>>>receive-hashing: off
>>>
>>>The Bridge device on the other hand....
>>>
>>>Offload parameters for lan:
>>>rx-checksumming: on
>>>tx-checksumming: on
>>>scatter-gather: off
>>>tcp-segmentation-offload: off
>>>udp-fragmentation-offload: off
>>>generic-segmentation-offload: off
>>>generic-receive-offload: on
>>>large-receive-offload: off
>>>rx-vlan-offload: off
>>>tx-vlan-offload: on
>>  ^^^^^^^^^^^^^^^^^^^ is this gfar?
> No the "Lan" nic is the bridge itself. The gfar in question is lan_wire.
>
> /Michael
>

Ok I would have saved hours of bisecting if I had just used the -e
switch with tcpdump from the beginning.
Jiri first of all the patch makes the connection work again. I can
ping the client on the wlan from the server and vice-versa. Taking a
look at the tcpdump (WITH -e) makes it obvious why it fails with the
non patched version...

This is a capture from the gfar lan port on the bridge with no patch applied
12:13:24.011492 00:13:d4:4f:a2:dc (oui Unknown) > b4:07:f9:70:b7:c1
(oui Unknown), ethertype 802.1Q (0x8100), length 102: vlan 19, p 0,
ethertype IPv4, gibson.comsick.at > 192.168.42.55: ICMP echo request,
id 23567, seq 74, length 64

As you can see we get a VLAN package????

With the patched version:
12:16:33.756966 00:13:d4:4f:a2:dc (oui Unknown) > b4:07:f9:70:b7:c1
(oui Unknown), ethertype IPv4 (0x0800), length 98: gibson.comsick.at >
192.168.42.55: ICMP echo request, id 23669, seq 2, length 64
12:16:33.843289 b4:07:f9:70:b7:c1 (oui Unknown) > 00:13:d4:4f:a2:dc
(oui Unknown), ethertype IPv4 (0x0800), length 98: 192.168.42.55 >
gibson.comsick.at: ICMP echo reply, id 23669, seq 2, length 64

No VLAN and I get my replies.
All that is left to do now is to find out why the current driver
thinks that it is on a VLAN when it isn't.

Any ideas Jiri?

Kind regards,
Michael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/