Re: [forcedeth bug] Re: [GIT] Networking

From: Jiri Pirko
Date: Fri Aug 05 2011 - 08:31:55 EST


Fri, Aug 05, 2011 at 02:18:55PM CEST, mingo@xxxxxxx wrote:
>
>* Jiri Pirko <jpirko@xxxxxxxxxx> wrote:
>
>> >> Is DEV_HAS_VLAN set in id->driver_data (L5344) ?
>> >
>> >How do i tell that without hacking the driver?
>>
>> look in dmesg for line like:
>> "forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi
>> desc-v3"
>>
>> if "vlan" is there, DEV_HAS_VLAN is set
>
>[ 3.534489] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
>
>Note, this is a pretty old system with an old nvidia chipset and
>on-board ethernet:
>
>00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
> Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at da100000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at d000 [size=8]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

Please do lspci -nn

There are two CK804 chips:
0x10DE, 0x0056
0x10DE, 0x0057

I have only the second one handy - Getting the machine as we speak.

Jirka

>
>Thanks,
>
> Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/