[RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions

[Nicolas Ferre]

For PIO NAND access functions, we use the features of the SMC:
- no need to take into account the NAND bus width: SMC will deal with this
- a word aligned memcpy on the NAND chip-select space is able to generate
  proper SMC behavior while optimizing AHB bus usage thanks to optimized memcpy
  implementation.

Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
 drivers/mtd/nand/atmel_nand.c |   71 +++++++++++++++++-----------------------
 1 files changed, 30 insertions(+), 41 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index b300705..cb8a04b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -160,37 +160,6 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
                 !!host->board->rdy_pin_active_low;
 }
 
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
-	struct nand_chip	*nand_chip = mtd->priv;
-
-	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
 static void dma_complete_func(void *completion)
 {
 	complete(completion);
@@ -265,33 +234,53 @@ err_buf:
 static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
-	struct atmel_nand_host *host = chip->priv;
+	u32 align;
+	u8 *pbuf;
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
 			return;
 
-	if (host->board->bus_width_16)
-		atmel_read_buf16(mtd, buf, len);
-	else
-		atmel_read_buf8(mtd, buf, len);
+	/* if no DMA operation possible, use PIO */
+	pbuf = buf;
+	align = 0x03 & ((unsigned)pbuf);
+
+	if (align) {
+		u32 align_len = 4 - align;
+
+		/* non aligned buffer: re-align to next word boundary */
+		ioread8_rep(chip->IO_ADDR_R, pbuf, align_len);
+		pbuf += align_len;
+		len -= align_len;
+	}
+	memcpy((void *)pbuf, chip->IO_ADDR_R, len);
 }
 
 static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
 {
 	struct nand_chip *chip = mtd->priv;
-	struct atmel_nand_host *host = chip->priv;
+	u32 align;
+	const u8 *pbuf;
 
 	if (use_dma && len > mtd->oobsize)
 		/* only use DMA for bigger than oob size: better performances */
 		if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
 			return;
 
-	if (host->board->bus_width_16)
-		atmel_write_buf16(mtd, buf, len);
-	else
-		atmel_write_buf8(mtd, buf, len);
+	/* if no DMA operation possible, use PIO */
+	pbuf = buf;
+	align = 0x03 & ((unsigned)pbuf);
+
+	if (align) {
+		u32 align_len = 4 - align;
+
+		/* non aligned buffer: re-align to next word boundary */
+		iowrite8_rep(chip->IO_ADDR_W, pbuf, align_len);
+		pbuf += align_len;
+		len -= align_len;
+	}
+	memcpy(chip->IO_ADDR_W, (void *)pbuf, len);
 }
 
 /*
-- 
1.7.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/