Re: [PATCH 1/3] serial/imx: add device tree support

From: Grant Likely
Date: Sun Jun 19 2011 - 11:06:17 EST


On Sun, Jun 19, 2011 at 1:30 AM, Shawn Guo <shawn.guo@xxxxxxxxxxxxx> wrote:
> On Sat, Jun 18, 2011 at 10:19:34AM -0600, Grant Likely wrote:
>> On Sat, Jun 18, 2011 at 11:19:12PM +0800, Shawn Guo wrote:
>> > It adds device tree data parsing support for imx tty/serial driver.
>> >
>> > Signed-off-by: Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
>> > Signed-off-by: Jason Liu <jason.hui@xxxxxxxxxx>
>> > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
>> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>> > ---
>> >  .../bindings/tty/serial/fsl-imx-uart.txt           |   21 +++++
>> >  drivers/tty/serial/imx.c                           |   81 +++++++++++++++++---
>> >  2 files changed, 92 insertions(+), 10 deletions(-)
>> >  create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>> > new file mode 100644
>> > index 0000000..7648e17
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>> > @@ -0,0 +1,21 @@
>> > +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
>> > +
>> > +Required properties:
>> > +- compatible : should be "fsl,<soc>-uart", "fsl,imx-uart"
>>
>> I'd make this "fsl,<soc>-uart", "fsl,imx51-uart"
>>
>> It's better to anchor these things on real silicon, or a real ip block
>> specification rather than something pseudo-generic.  Subsequent chips,
>> like the imx53, should simply claim compatibility with the older
>> fsl,imx51-uart.
>
> It is a real IP block on all imx silicons (except imx23 and imx28
> which are known as former stmp).
>
>>
>> (in essence, "fsl,imx51-uart" becomes the generic string without the
>> downside of having no obvious recourse when new silicon shows up that
>> is an imx part, but isn't compatible with the imx51 uart.
>>
> In this case, should imx1 the ancestor of imx family than imx51
> becomes part of that generic string?  Claiming uart of imx1, imx21
> and imx31 (senior than imx51) compatible with the imx51 uart seems
> odd to me.
>
> That said, IMO, "fsl,imx-uart" stands a real IP block specification
> here and can be a perfect generic compatibility string to tell the
> recourse of any imx silicon using this IP.

Yes, but which /version/ of the IP block? Hardware designers are
notorious for changing hardware designs for newer silicon, sometimes
to add features, sometimes to fix bugs. While I understand the
temptation to boil a compatible value down to a nice clean generic
string, doing so only works in a perfect world. In the real world,
you still need to have some information about the specific
implementation. I prefer this specifying it to the SoC name, but I've
been known to be convinced that specifying it to the ip-block name &
version in certain circumstances, like for IP blocks in an FPGA, or
some of the Freescale powerpc pXXXX SoCs which actually had an IP
block swapped out midway through the life of the chip.

Besides, encoding an soc or ip block version into the 'generic'
compatible values is not just good practice, it has *zero downside*.
That's the beauty of the compatible property semantics. Any node can
claim compatibility with an existing device. If no existing device
fits correctly, then the node simple does not claim compatibility.
Drivers can bind to any number of compatible strings, so it would be
just fine for the of_match_table list to include both "fsl,imx-21" and
"fsl,imx-51" (assuming that is the appropriate solution in this case).

>
>> > +- reg : address and length of the register set for the device
>> > +- interrupts : should contain uart interrupt
>> > +- id : should be the port ID defined by soc
>> > +
>> > +Optional properties:
>> > +- fsl,has-rts-cts : indicate it has rts-cts
>> > +- fsl,irda-mode : support irda mode
>> > +
>> > +Example:
>> > +
>> > +uart@73fbc000 {
>> > +   compatible = "fsl,imx51-uart", "fsl,imx-uart";
>> > +   reg = <0x73fbc000 0x4000>;
>> > +   interrupts = <31>;
>> > +   id = <1>;
>> > +   fsl,has-rts-cts;
>> > +};
>> > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> > index a544731..2769353 100644
>> > --- a/drivers/tty/serial/imx.c
>> > +++ b/drivers/tty/serial/imx.c
>> > @@ -45,6 +45,8 @@
>> >  #include <linux/delay.h>
>> >  #include <linux/rational.h>
>> >  #include <linux/slab.h>
>> > +#include <linux/of.h>
>> > +#include <linux/of_address.h>
>> >
>> >  #include <asm/io.h>
>> >  #include <asm/irq.h>
>> > @@ -1223,6 +1225,63 @@ static int serial_imx_resume(struct platform_device *dev)
>> >     return 0;
>> >  }
>> >
>> > +#ifdef CONFIG_OF
>> > +static int serial_imx_probe_dt(struct imx_port *sport,
>> > +           struct platform_device *pdev)
>> > +{
>> > +   struct device_node *node = pdev->dev.of_node;
>> > +   const __be32 *line;
>> > +
>> > +   if (!node)
>> > +           return -ENODEV;
>> > +
>> > +   line = of_get_property(node, "id", NULL);
>> > +   if (!line)
>> > +           return -ENODEV;
>> > +
>> > +   sport->port.line = be32_to_cpup(line) - 1;
>>
>> Hmmm, I really would like to be rid of this.  Instead, if uarts must
>> be enumerated, the driver should look for a /aliases/uart* property
>> that matches the of_node.  Doing it that way is already established in
>> the OpenFirmware documentation, and it ensures there are no overlaps
>> in the global namespace.
>>
>
> I just gave one more try to avoid using 'aliases', and you gave a
> 'no' again.  Now, I know how hard you are on this.  Okay, I start
> thinking about your suggestion seriously :)

Ha ha ha.

>
>> We do need some infrastructure to make that easier though.  Would you
>> have time to help put that together?
>>
> Ok, I will give it a try.

Cool. We'll talk next week about it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/