Re: [RFC PATCH 11/11] arm/versatile: Add device tree support

From: Rob Herring
Date: Thu Jun 16 2011 - 10:19:25 EST


Grant,

On 06/15/2011 11:43 PM, Grant Likely wrote:
> For testing the dt work, define a dt-enabled versatile platform.
>
> This patch adds a new versatile platform for when using the device
> tree. Add platform and amba devices are discovered and registered by
> parsing the device tree. Clocks and initial io mappings are still
> configured statically.
>
> This patch is definitely not complete since a few of the device
> drivers depend on static platform_data in order to initialize
> correctly. The next step will be to fix up the breakage one driver at
> a time. However, this patch leaves existing board support files
> alone, so nothing should be broken.
>
> Signed-off-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/versatile-ab.dts | 185 ++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/versatile-pb.dts | 48 ++++++++
> arch/arm/mach-versatile/Kconfig | 8 +
> arch/arm/mach-versatile/Makefile | 1
> arch/arm/mach-versatile/core.c | 61 +++++++++++
> arch/arm/mach-versatile/core.h | 5 +
> arch/arm/mach-versatile/versatile_dt.c | 66 +++++++++++
> 7 files changed, 374 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/versatile-ab.dts
> create mode 100644 arch/arm/boot/dts/versatile-pb.dts
> create mode 100644 arch/arm/mach-versatile/versatile_dt.c
>
> diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
> new file mode 100644
> index 0000000..0e31dc9
> --- /dev/null
> +++ b/arch/arm/boot/dts/versatile-ab.dts
> @@ -0,0 +1,185 @@
> +/dts-v1/;
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "ARM Versatile AB";
> + compatible = "arm,versatile-ab";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&vic>;
> +
> + memory {
> + reg = <0x0 0x08000000>;
> + };
> +
> + flash@34000000 {
> + compatible = "arm,versatile-flash";

Seems like this should be a flash part number.

> + reg = <0x34000000 0x4000000>;
> + bank-width = <4>;
> + };
> +
> + i2c@10002000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "arm,versatile-i2c";
> + reg = <0x10002000 0x1000>;
> +
> + rtc@68 {
> + compatible = "dallas,ds1338";
> + reg = <0x68>;
> + };
> + };
> +
> + net@10010000 {
> + compatible = "smsc,lan91c111";
> + reg = <0x10010000 0x10000>;
> + interrupts = <25>;
> + };
> +
> + lcd@10008000 {
> + compatible = "arm,versatile-lcd";
> + reg = <0x10008000 0x1000>;
> + };
> +
> + amba {
> + compatible = "arm,amba-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vic: intc@10140000 {
> + compatible = "arm,versatile-vic", "arm,vic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x10140000 0x1000>;
> + };
> +
> + sic: intc@10003000 {
> + compatible = "arm,versatile-sic", "arm,sic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x10003000 0x1000>;
> + interrupt-parent = <&vic>;
> + interrupts = <31>; /* Cascaded to vic */
> + };
> +
> + dma@10130000 {
> + compatible = "arm,primecell";

Should have a more specific compatible string. arm,pl081 IIRC?

> + reg = <0x10130000 0x1000>;
> + interrupts = <17>;
> + };
> +
> + uart0: uart@101f1000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x101f1000 0x1000>;
> + interrupts = <12>;
> + };
> +
> + uart1: uart@101f2000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x101f2000 0x1000>;
> + interrupts = <13>;
> + };
> +
> + uart2: uart@101f3000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x101f3000 0x1000>;
> + interrupts = <14>;
> + };
> +
> + smc@10100000 {
> + compatible = "arm,primecell";

ditto

> + reg = <0x10100000 0x1000>;
> + };
> +
> + mpmc@10110000 {
> + compatible = "arm,primecell";
> + reg = <0x10110000 0x1000>;
> + };
> +
> + display@10120000 {
> + compatible = "arm,pl110", "arm,primecell";
> + reg = <0x10120000 0x1000>;
> + interrupts = <16>;
> + };
> +
> + sctl@101e0000 {
> + compatible = "arm,primecell";
> + reg = <0x101e0000 0x1000>;
> + };
> +
> + watchdog@101e1000 {
> + compatible = "arm,primecell";
> + reg = <0x101e1000 0x1000>;
> + interrupts = <0>;
> + };
> +
> + gpio0: gpio@101e4000 {
> + compatible = "arm,primecell";

arm,pl061

> + reg = <0x101e4000 0x1000>;
> + gpio-controller;
> + interrupts = <6>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio1: gpio@101e5000 {
> + compatible = "arm,primecell";
> + reg = <0x101e5000 0x1000>;
> + interrupts = <7>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + rtc@101e8000 {
> + compatible = "arm,primecell";

arm,pl031 (or pl030?)

> + reg = <0x101e8000 0x1000>;
> + interrupts = <10>;
> + };
> +
> + sci@101f0000 {
> + compatible = "arm,primecell";
> + reg = <0x101f0000 0x1000>;
> + interrupts = <15>;
> + };
> +
> + ssp@101f4000 {
> + compatible = "arm,primecell";

arm,pl022

> + reg = <0x101f4000 0x1000>;
> + interrupts = <11>;
> + };
> +
> + fpga {
> + compatible = "arm,versatile-fpga", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x10000000 0x10000>;
> +
> + aaci@4000 {
> + compatible = "arm,primecell";
> + reg = <0x4000 0x1000>;
> + interrupts = <24>;
> + };
> + mmc@5000 {
> + compatible = "arm,primecell";
> + reg = < 0x5000 0x1000>;
> + interrupts = <22>;
> + };
> + kmi@6000 {
> + compatible = "arm,pl050", "arm,primecell";
> + reg = <0x6000 0x1000>;
> + interrupt-parent = <&sic>;
> + interrupts = <3>;
> + };
> + kmi@7000 {
> + compatible = "arm,pl050", "arm,primecell";
> + reg = <0x7000 0x1000>;
> + interrupt-parent = <&sic>;
> + interrupts = <4>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
> new file mode 100644
> index 0000000..d1934af
> --- /dev/null
> +++ b/arch/arm/boot/dts/versatile-pb.dts
> @@ -0,0 +1,48 @@
> +/include/ "versatile-ab.dts"
> +
> +/ {
> + model = "ARM Versatile PB";
> + compatible = "arm,versatile-pb";
> +
> + amba {
> + gpio2: gpio@101e6000 {
> + compatible = "arm,primecell";
> + reg = <0x101e6000 0x1000>;
> + interrupts = <8>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpio3: gpio@101e7000 {
> + compatible = "arm,primecell";
> + reg = <0x101e7000 0x1000>;
> + interrupts = <9>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + fpga {
> + uart@9000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x9000 0x1000>;
> + interrupt-parent = <&sic>;
> + interrupts = <6>;
> + };
> + sci@a000 {
> + compatible = "arm,primecell";
> + reg = <0xa000 0x1000>;
> + interrupt-parent = <&sic>;
> + interrupts = <5>;
> + };
> + mmc@b000 {
> + compatible = "arm,primecell";
> + reg = <0xb000 0x1000>;
> + interrupts = <23>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
> index 9cdec5a..c1f38f6 100644
> --- a/arch/arm/mach-versatile/Kconfig
> +++ b/arch/arm/mach-versatile/Kconfig
> @@ -17,4 +17,12 @@ config MACH_VERSATILE_AB
> Include support for the ARM(R) Versatile Application Baseboard
> for the ARM926EJ-S.
>
> +config MACH_VERSATILE_DT
> + bool "Support Versatile platform from device tree"
> + select USE_OF
> + select CPU_ARM926T
> + help
> + Include support for the ARM(R) Versatile/PB platform,
> + using the device tree for discovery
> +
> endmenu
> diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
> index 97cf4d8..81fa3fe 100644
> --- a/arch/arm/mach-versatile/Makefile
> +++ b/arch/arm/mach-versatile/Makefile
> @@ -5,4 +5,5 @@
> obj-y := core.o
> obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o
> obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o
> +obj-$(CONFIG_MACH_VERSATILE_DT) += versatile_dt.o
> obj-$(CONFIG_PCI) += pci.o
> diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
> index 0c99cf0..80e010b 100644
> --- a/arch/arm/mach-versatile/core.c
> +++ b/arch/arm/mach-versatile/core.c
> @@ -24,6 +24,8 @@
> #include <linux/platform_device.h>
> #include <linux/sysdev.h>
> #include <linux/interrupt.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> #include <linux/amba/bus.h>
> #include <linux/amba/clcd.h>
> #include <linux/amba/pl061.h>
> @@ -83,13 +85,26 @@ static struct fpga_irq_data sic_irq = {
> #define PIC_MASK 0
> #endif
>
> +/* Lookup table for finding a DT node that represents the vic instance */
> +static struct of_device_id vic_of_match[] __initdata = {

__initconst

> + { .compatible = "arm,vic", },
> + {}
> +};
> +
> +static struct of_device_id sic_of_match[] __initdata = {

ditto

> + { .compatible = "arm,sic", },
> + {}
> +};
> +
> void __init versatile_init_irq(void)
> {
> vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
> + irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START);
>
> writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
>
> fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
> + irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START);
>
> /*
> * Interrupts on secondary controller from 0 to 8 are routed to
> @@ -646,6 +661,52 @@ static struct amba_device *amba_devs[] __initdata = {
> &kmi1_device,
> };
>
> +#ifdef CONFIG_OF
> +/*
> + * Lookup table for attaching a specific name and platform_data pointer to
> + * devices as they get created by of_platform_populate(). Ideally this table
> + * would not exist, but the current clock implementation depends on some devices
> + * having a specific name.
> + */
> +struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
> +
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL),
> +
> +#if 0
> + /*
> + * These entries are unnecessary because no clocks referencing
> + * them. I've left them in for now as place holders in case
> + * any of them need to be added back, but they should be
> + * removed before actually committing this patch. --gcl
> + */
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
> +
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
> + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
> +#endif
> + {}
> +};
> +#endif
> +
> #ifdef CONFIG_LEDS
> #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
>
> diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
> index fd6404e..c97b070 100644
> --- a/arch/arm/mach-versatile/core.h
> +++ b/arch/arm/mach-versatile/core.h
> @@ -23,6 +23,7 @@
> #define __ASM_ARCH_VERSATILE_H
>
> #include <linux/amba/bus.h>
> +#include <linux/of_platform.h>
>
> extern void __init versatile_init(void);
> extern void __init versatile_init_early(void);
> @@ -31,6 +32,10 @@ extern void __init versatile_map_io(void);
> extern struct sys_timer versatile_timer;
> extern unsigned int mmc_status(struct device *dev);
>
> +#ifdef CONFIG_OF

Don't really need the ifdef.

> +extern struct of_dev_auxdata versatile_auxdata_lookup[];
> +#endif
> +
> #define AMBA_DEVICE(name,busid,base,plat) \
> static struct amba_device name##_device = { \
> .dev = { \
> diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
> new file mode 100644
> index 0000000..f476a11
> --- /dev/null
> +++ b/arch/arm/mach-versatile/versatile_dt.c
> @@ -0,0 +1,66 @@
> +/*
> + * Versatile board support using the device tree
> + *
> + * Copyright (C) 2010 Secret Lab Technologies Ltd.
> + * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@xxxxxxxxxxxxx>
> + * Copyright (C) 2004 ARM Limited
> + * Copyright (C) 2000 Deep Blue Solutions Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/sysdev.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/amba/bus.h>
> +#include <linux/amba/pl061.h>
> +#include <linux/amba/mmci.h>

A lot of these headers are not needed.

> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_fdt.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +
> +#include <mach/hardware.h>
> +#include <asm/irq.h>
> +#include <asm/mach-types.h>
> +
> +#include <asm/mach/arch.h>
> +
> +#include "core.h"
> +
> +static void __init versatile_dt_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table,
> + versatile_auxdata_lookup, NULL);
> +}
> +
> +static const char *versatile_dt_match[] __initdata = {

__initconst

> + "arm,versatile-ab",
> + "arm,versatile-pb",
> + NULL,
> +};
> +
> +DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
> + .map_io = versatile_map_io,
> + .init_early = versatile_init_early,
> + .init_irq = versatile_init_irq,
> + .timer = &versatile_timer,
> + .init_machine = versatile_dt_init,
> + .dt_compat = versatile_dt_match,
> +MACHINE_END
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/devicetree-discuss

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/