[PATCH 1/4] This patch adds ok2440 development board support.
From: Wu DaoGuang
Date: Wed Jun 08 2011 - 21:03:45 EST
The ok2440 development board is based on SAMSUNG's S3C2440
microprocessor,which is developed with ARM920T core.
The file is modified from arch/arm/mach-s3c2440/mach-smdk2440.c
that maintained by Ben Dooks <ben@xxxxxxxxxxxx>
I modified it to fit the ok2440 development board.
The following patches are against v3.0-rc2.
Signed-off-by: Wu DaoGuang <wdgvip@xxxxxxxxx>
---
arch/arm/mach-s3c2440/mach-ok2440.c | 404 +++++++++++++++++++++++++++++++++++
1 files changed, 404 insertions(+), 0 deletions(-)
create mode 100755 arch/arm/mach-s3c2440/mach-ok2440.c
diff --git a/arch/arm/mach-s3c2440/mach-ok2440.c b/arch/arm/mach-s3c2440/mach-ok2440.c
new file mode 100755
index 0000000..8c858f1
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-ok2440.c
@@ -0,0 +1,404 @@
+/* linux/arch/arm/mach-s3c2440/mach-ok2440.c
+ *
+ * Copyright (c) 2011 Feiling Embedded
+ * Base on mach-smdk2440.c by Ben Dooks <ben@xxxxxxxxxxxx>
+ *
+ * Wu DaoGuang <wdgvip@xxxxxxxxx>
+ *
+ * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/dm9000.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/mmc/host.h>
+#include <linux/clk.h>
+#include <linux/syscore_ops.h>
+
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/udc.h>
+#include <plat/mci.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-mem.h>
+#include <mach/irqs.h>
+
+
+#include <mach/idle.h>
+#include <mach/fb.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-cfg.h>
+#include <plat/usb-control.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/common-smdk.h>
+#include <sound/s3c24xx_uda134x.h>
+
+#define MACH_OK2440_DM9K_BASE (S3C2410_CS4 + 0x300)
+
+static struct map_desc ok2440_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg ok2440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+/* LCD driver info */
+
+static struct s3c2410fb_display ok2440_lcd_cfg __initdata = {
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+
+ .type = S3C2410_LCDCON1_TFT,
+
+ .width = 320,
+ .height = 240,
+
+ .pixclock = 270000, /* HCLK 60 MHz, divisor 10 */
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .left_margin = 8,
+ .right_margin = 5,
+ .hsync_len = 16,
+ .upper_margin = 8,
+ .lower_margin = 5,
+ .vsync_len = 2,
+};
+
+static struct s3c2410fb_mach_info ok2440_fb_info __initdata = {
+ .displays = &ok2440_lcd_cfg,
+ .num_displays = 1,
+ .default_display = 0,
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+};
+
+/* Nand flash partitions on ok2440 */
+static struct mtd_partition ok2440_default_nand_part[] = {
+ [0] = {
+ .name = "u-boot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "App",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "Kernel",
+ .size = SZ_1M*4,
+ .offset = SZ_1M*3,
+ },
+ [3] = {
+ .name = "Ramdisk",
+ .size = SZ_16M,
+ .offset = SZ_1M*7,
+ },
+ [3] = {
+ .name = "Rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M*23,
+ },
+};
+static struct s3c2410_nand_set ok2440_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(ok2440_default_nand_part),
+ .partitions = ok2440_default_nand_part,
+ .flash_bbt = 1, /* We use u-boot to creat a BBT*/
+ }
+};
+
+static struct s3c2410_platform_nand ok2440_nand_info __initdata = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(ok2440_nand_sets),
+ .sets = ok2440_nand_sets,
+ .ignore_unset_ecc = 1,
+};
+
+
+/* DM9000AEP 10/100 ethernet controller */
+static struct resource ok2440_dm9k_resource[] = {
+ [0] = {
+ .start = MACH_OK2440_DM9K_BASE,
+ .end = MACH_OK2440_DM9K_BASE + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MACH_OK2440_DM9K_BASE + 4,
+ .end = MACH_OK2440_DM9K_BASE + 7,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = IRQ_EINT7,
+ .end = IRQ_EINT7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+/* The DM9000 has no eeprom ,and it's MAC address is set by
+ * the bootloader before starting the kernel.
+ */
+static struct dm9000_plat_data ok2440_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+static struct platform_device ok2440_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ok2440_dm9k_resource),
+ .resource = ok2440_dm9k_resource,
+ .dev = {
+ .platform_data = &ok2440_dm9k_pdata,
+ },
+};
+
+/* LEDS sourport */
+static struct s3c24xx_led_platdata ok2440_led0_pdata = {
+ .name = "led0",
+ .gpio = S3C2410_GPF(5),
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .def_trigger = "heartbeat",
+};
+
+static struct platform_device ok2440_led0 = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &ok2440_led0_pdata,
+ }
+};
+
+/* AUDIO */
+static struct s3c24xx_uda134x_platform_data ok2440_audio_pins = {
+ .l3_clk = S3C2410_GPB(4),
+ .l3_mode = S3C2410_GPB(2),
+ .l3_data = S3C2410_GPB(3),
+ .model = UDA134X_UDA1341
+};
+
+static struct platform_device ok2440_audio = {
+ .name = "s3c24xx_uda134x",
+ .id = 0,
+ .dev = {
+ .platform_data = &ok2440_audio_pins,
+ }
+};
+
+static struct platform_device uda1340_codec = {
+ .name = "uda134x-codec",
+ .id = -1,
+};
+
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c08 = {
+ .byte_len = SZ_8K / 8,
+ .page_size = 16,
+};
+
+static struct i2c_board_info ok2440_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("24c08", 0x50),
+ .platform_data = &at24c08,
+ },
+};
+
+/* USB device UDC support */
+static struct s3c2410_udc_mach_info ok2440_udc_cfg __initdata = {
+ .pullup_pin = S3C2410_GPG(9),
+};
+
+/* USB */
+static struct s3c2410_hcd_info ok2440_usb_info __initdata = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/* MMC/SD */
+static struct s3c24xx_mci_pdata ok2440_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPG(10),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+static struct platform_device *ok2440_devices[] __initdata = {
+ &s3c_device_ohci,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_sdi,
+ &s3c_device_nand,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &uda1340_codec,
+ &ok2440_device_eth,
+ &ok2440_audio,
+ &ok2440_led0,
+ &samsung_asoc_dma,
+
+};
+
+static void __init ok2440_map_io(void)
+{
+ s3c24xx_init_io(ok2440_iodesc, ARRAY_SIZE(ok2440_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(ok2440_uartcfgs, ARRAY_SIZE(ok2440_uartcfgs));
+}
+
+static void __init ok2440_machine_init(void)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+ /*configure the mmc protect to pull high . */
+ s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+ s3c24xx_fb_set_platdata(&ok2440_fb_info);
+ s3c_i2c0_set_platdata(NULL);
+
+ s3c_ohci_set_platdata(&ok2440_usb_info);
+
+ s3c_nand_set_platdata(&ok2440_nand_info);
+ s3c24xx_udc_set_platdata(&ok2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&ok2440_mmc_cfg);
+ i2c_register_board_info(0, ok2440_i2c_devs,
+ ARRAY_SIZE(ok2440_i2c_devs));
+
+ platform_add_devices(ok2440_devices, ARRAY_SIZE(ok2440_devices));
+ s3c_pm_init();
+}
+
+MACHINE_START(S3C2440, "OK2440 development board.")
+ /* Maintainer: Wu DaoGuang <wdgvip@xxxxxxxxx> */
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = ok2440_map_io,
+ .init_machine = ok2440_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/