Re: [PATCH 1/4] MIPS: Replace _PAGE_READ with _PAGE_NO_READ

[Kevin Cernekee]

On Fri, May 13, 2011 at 8:07 AM, Ralf Baechle <ralf@xxxxxxxxxxxxxx> wrote:
>> Reuse more of the same definitions for the non-RIXI and RIXI cases. ÂThis
>> avoids having special cases for kernel_uses_smartmips_rixi cluttering up
>> the pgtable*.h files.
>>
>> On hardware that does not support RI/XI, EntryLo bits 31:30 / 63:62 will
>> remain unset and RI/XI permissions will not be enforced.
>
> Nice idea but it breaks on 64-bit hardware running 32-bit kernels. ÂOn
> those the RI/XI bits written to c0_entrylo0/1 31:30 will be interpreted as
> physical address bits 37:36.

Hmm, are you sure?  (Unfortunately I do not have a 64-bit machine to
test it on.)

I did not touch David's existing build_update_entries(), which makes a
point not to set the RI/XI bits when the RIXI feature is disabled:

        if (kernel_uses_smartmips_rixi) {
                UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC));
                UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC));
                UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) -
ilog2(_PAGE_NO_EXEC));
                if (r4k_250MHZhwbug())
                        UASM_i_MTC0(p, 0, C0_ENTRYLO0);
                UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
                UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) -
ilog2(_PAGE_NO_EXEC));
        } else {
                UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /*
convert to entrylo0 */
                if (r4k_250MHZhwbug())
                        UASM_i_MTC0(p, 0, C0_ENTRYLO0);
                UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
                UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /*
convert to entrylo1 */
                if (r45k_bvahwbug())
                        uasm_i_mfc0(p, tmp, C0_INDEX);
        }

If RIXI is enabled, it shifts the SW bits off the end of the register,
then rotates the RI/XI bits into place.

If RIXI is disabled, it shifts the SW bits + RI/XI bits off the end of
the register.  It should not be setting bits 31:30 or 63:62, ever.

(A side issue here is that ROTR is a MIPS R2 instruction, so we could
never remove the old handler and use the RIXI version of the TLB
handler on an R1 machine.)

If setting EntryLo bits 31:30 for RI/XI is illegal on a 64-bit system
running a 32-bit kernel, I suspect we will have a problem with the
existing RIXI TLB update code, regardless of whether my changes are
applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/