[PATCH 2/3] es1968: convert TEA575x support to new interface

From: Ondrej Zary
Date: Mon May 09 2011 - 17:40:34 EST


Use common functions to access TEA575x tuner - remove original read/write
functions and provide new pin manipulation functions instead.

Tested with SF64-PCE2 card.

Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>

--- linux-2.6.39-rc2-/sound/pci/es1968.c 2011-05-06 22:46:24.000000000 +0200
+++ linux-2.6.39-rc2/sound/pci/es1968.c 2011-05-09 23:25:06.000000000 +0200
@@ -2591,96 +2591,48 @@ static int __devinit snd_es1968_input_re
#define STR_WREN 0x0100 /* GPIO8 */
#define STR_MOST 0x0200 /* GPIO9 */

-static void snd_es1968_tea575x_write(struct snd_tea575x *tea, unsigned int val)
+static void snd_es1968_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
{
struct es1968 *chip = tea->private_data;
unsigned long io = chip->io_port + GPIO_DATA;
- u16 l, bits;
- u16 omask, odir;
+ u16 val = 0;

- omask = inw(io + IO_MASK);
- odir = (inw(io + IO_DIR) & ~STR_DATA) | (STR_CLK | STR_WREN);
- outw(odir | STR_DATA, io + IO_DIR);
- outw(~(STR_DATA | STR_CLK | STR_WREN), io + IO_MASK);
- udelay(16);
-
- for (l = 25; l; l--) {
- bits = ((val >> 18) & STR_DATA) | STR_WREN;
- val <<= 1; /* shift data */
- outw(bits, io); /* start strobe */
- udelay(2);
- outw(bits | STR_CLK, io); /* HI level */
- udelay(2);
- outw(bits, io); /* LO level */
- udelay(4);
- }
-
- if (!tea->mute)
- outw(0, io);
+ val |= (pins & TEA575X_DATA) ? STR_DATA : 0;
+ val |= (pins & TEA575X_CLK) ? STR_CLK : 0;
+ val |= (pins & TEA575X_WREN) ? STR_WREN : 0;

- udelay(4);
- outw(omask, io + IO_MASK);
- outw(odir, io + IO_DIR);
- msleep(125);
+ outw(val, io);
}

-static unsigned int snd_es1968_tea575x_read(struct snd_tea575x *tea)
+static u8 snd_es1968_tea575x_get_pins(struct snd_tea575x *tea)
{
struct es1968 *chip = tea->private_data;
unsigned long io = chip->io_port + GPIO_DATA;
- u16 l, rdata;
- u32 data = 0;
- u16 omask;
-
- omask = inw(io + IO_MASK);
- outw(~(STR_CLK | STR_WREN), io + IO_MASK);
- outw(0, io);
- udelay(16);
-
- for (l = 24; l--;) {
- outw(STR_CLK, io); /* HI state */
- udelay(2);
- if (!l)
- tea->tuned = inw(io) & STR_MOST ? 0 : 1;
- outw(0, io); /* LO state */
- udelay(2);
- data <<= 1; /* shift data */
- rdata = inw(io);
- if (!l)
- tea->stereo = (rdata & STR_MOST) ? 0 : 1;
- else if (l && rdata & STR_DATA)
- data++;
- udelay(2);
- }
+ u16 val = inw(io);

- if (tea->mute)
- outw(STR_WREN, io);
-
- udelay(4);
- outw(omask, io + IO_MASK);
-
- return data & 0x3ffe;
+ return (val & STR_DATA) ? TEA575X_DATA : 0 |
+ (val & STR_MOST) ? TEA575X_MOST : 0;
}

-static void snd_es1968_tea575x_mute(struct snd_tea575x *tea, unsigned int mute)
+static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool output)
{
struct es1968 *chip = tea->private_data;
unsigned long io = chip->io_port + GPIO_DATA;
- u16 omask;
+ u16 odir = inw(io + IO_DIR);

- omask = inw(io + IO_MASK);
- outw(~STR_WREN, io + IO_MASK);
- tea->mute = mute;
- outw(tea->mute ? STR_WREN : 0, io);
- udelay(4);
- outw(omask, io + IO_MASK);
- msleep(125);
+ if (output) {
+ outw(~(STR_DATA | STR_CLK | STR_WREN), io + IO_MASK);
+ outw(odir | STR_DATA | STR_CLK | STR_WREN, io + IO_DIR);
+ } else {
+ outw(~(STR_CLK | STR_WREN | STR_DATA | STR_MOST), io + IO_MASK);
+ outw((odir & ~(STR_DATA | STR_MOST)) | STR_CLK | STR_WREN, io + IO_DIR);
+ }
}

static struct snd_tea575x_ops snd_es1968_tea_ops = {
- .write = snd_es1968_tea575x_write,
- .read = snd_es1968_tea575x_read,
- .mute = snd_es1968_tea575x_mute,
+ .set_pins = snd_es1968_tea575x_set_pins,
+ .get_pins = snd_es1968_tea575x_get_pins,
+ .set_direction = snd_es1968_tea575x_set_direction,
};
#endif

@@ -2845,7 +2797,8 @@ static int __devinit snd_es1968_create(s
chip->tea.freq_fixup = 10700;
chip->tea.private_data = chip;
chip->tea.ops = &snd_es1968_tea_ops;
- snd_tea575x_init(&chip->tea);
+ if (!snd_tea575x_init(&chip->tea))
+ printk(KERN_INFO "es1968: detected TEA575x radio\n");
#endif

*chip_ret = chip;


--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/