[PATCH 1/3] viafb: gather common good, old VGA initialization in one place
From: Florian Tobias Schandinat
Date: Sat Apr 23 2011 - 21:45:04 EST
This patch moves all unprotected VGA initialization in one table and
provides some documentation for those values.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
---
drivers/video/via/hw.c | 49 ++++++++++++++++++++++++++++++++----------
drivers/video/via/viamode.c | 19 ----------------
2 files changed, 37 insertions(+), 31 deletions(-)
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 0098270..5b9c096 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -308,6 +308,42 @@ static struct io_reg scaling_parameters[] = {
{VIACR, CR87, 0xFF, 0x1F}, /* LCD Scaling Parameter 14 */
};
+static struct io_reg common_vga[] = {
+ {VIACR, CR07, 0x10, 0x10}, /* [0] vertical total (bit 8)
+ [1] vertical display end (bit 8)
+ [2] vertical retrace start (bit 8)
+ [3] start vertical blanking (bit 8)
+ [4] line compare (bit 8)
+ [5] vertical total (bit 9)
+ [6] vertical display end (bit 9)
+ [7] vertical retrace start (bit 9) */
+ {VIACR, CR08, 0xFF, 0x00}, /* [0-4] preset row scan
+ [5-6] byte panning */
+ {VIACR, CR09, 0xDF, 0x40}, /* [0-4] max scan line
+ [5] start vertical blanking (bit 9)
+ [6] line compare (bit 9)
+ [7] scan doubling */
+ {VIACR, CR0A, 0xFF, 0x1E}, /* [0-4] cursor start
+ [5] cursor disable */
+ {VIACR, CR0B, 0xFF, 0x00}, /* [0-4] cursor end
+ [5-6] cursor skew */
+ {VIACR, CR0E, 0xFF, 0x00}, /* [0-7] cursor location (high) */
+ {VIACR, CR0F, 0xFF, 0x00}, /* [0-7] cursor location (low) */
+ {VIACR, CR11, 0xF0, 0x80}, /* [0-3] vertical retrace end
+ [6] memory refresh bandwidth
+ [7] CRTC register protect enable */
+ {VIACR, CR14, 0xFF, 0x00}, /* [0-4] underline location
+ [5] divide memory address clock by 4
+ [6] double word addressing */
+ {VIACR, CR17, 0xFF, 0x63}, /* [0-1] mapping of display address 13-14
+ [2] divide scan line clock by 2
+ [3] divide memory address clock by 2
+ [5] address wrap
+ [6] byte mode select
+ [7] sync enable */
+ {VIACR, CR18, 0xFF, 0xFF}, /* [0-7] line compare */
+};
+
static struct fifo_depth_select display_fifo_depth_reg = {
/* IGA1 FIFO Depth_Select */
{IGA1_FIFO_DEPTH_SELECT_REG_NUM, {{SR17, 0, 7} } },
@@ -1167,22 +1203,10 @@ static void load_fix_bit_crtc_reg(void)
/* always set to 1 */
viafb_write_reg_mask(CR03, VIACR, 0x80, BIT7);
/* line compare should set all bits = 1 (extend modes) */
- viafb_write_reg(CR18, VIACR, 0xff);
- /* line compare should set all bits = 1 (extend modes) */
- viafb_write_reg_mask(CR07, VIACR, 0x10, BIT4);
- /* line compare should set all bits = 1 (extend modes) */
viafb_write_reg_mask(CR35, VIACR, 0x10, BIT4);
/* line compare should set all bits = 1 (extend modes) */
viafb_write_reg_mask(CR33, VIACR, 0x06, BIT0 + BIT1 + BIT2);
/*viafb_write_reg_mask(CR32, VIACR, 0x01, BIT0); */
- /* extend mode always set to e3h */
- viafb_write_reg(CR17, VIACR, 0xe3);
- /* extend mode always set to 0h */
- viafb_write_reg(CR08, VIACR, 0x00);
- /* extend mode always set to 0h */
- viafb_write_reg(CR14, VIACR, 0x00);
- viafb_write_reg_mask(CR09, VIACR, 0x40, 0xDF);
- viafb_write_reg_mask(CR11, VIACR, 0x00, BIT4 + BIT5 + BIT6);
viafb_lock_crt();
@@ -2353,6 +2377,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
outb(0x00, VIAAR);
/* Write Common Setting for Video Mode */
+ viafb_write_regx(common_vga, ARRAY_SIZE(common_vga));
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_CLE266:
viafb_write_regx(CLE266_ModeXregs, NUM_TOTAL_CLE266_ModeXregs);
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index 8c5bc41..036ad3a 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -30,10 +30,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIASR, SR1A, 0xFB, 0x08},
{VIASR, SR1E, 0x0F, 0x01},
{VIASR, SR2A, 0xFF, 0x00},
-{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */
-{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */
-{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */
-{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */
{VIACR, CR32, 0xFF, 0x00},
{VIACR, CR33, 0xFF, 0x00},
{VIACR, CR35, 0xFF, 0x00},
@@ -125,10 +121,6 @@ struct io_reg KM400_ModeXregs[] = {
{VIASR, SR2A, 0xFF, 0x00}, /* Power Management Control 5 */
{VIASR, SR2D, 0xFF, 0xFF}, /* Power Management Control 1 */
{VIASR, SR2E, 0xFF, 0xFF}, /* Power Management Control 2 */
- {VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */
- {VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */
- {VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */
- {VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */
{VIACR, CR33, 0xFF, 0x00},
{VIACR, CR55, 0x80, 0x00},
{VIACR, CR5D, 0x80, 0x00},
@@ -162,10 +154,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIASR, SR1E, 0xFF, 0x01},
{VIASR, SR2A, 0xFF, 0x00},
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
-{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */
-{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */
-{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */
-{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */
{VIACR, CR32, 0xFF, 0x00},
{VIACR, CR33, 0xFF, 0x00},
{VIACR, CR35, 0xFF, 0x00},
@@ -205,13 +193,6 @@ struct io_reg VX855_ModeXregs[] = {
{VIASR, SR58, 0xFF, 0x00},
{VIASR, SR59, 0xFF, 0x00},
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
-{VIACR, CR09, 0xFF, 0x00}, /* Initial CR09=0*/
-{VIACR, CR11, 0x8F, 0x00}, /* IGA1 initial Vertical end */
-{VIACR, CR17, 0x7F, 0x00}, /* IGA1 CRT Mode control init */
-{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */
-{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */
-{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */
-{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */
{VIACR, CR32, 0xFF, 0x00},
{VIACR, CR33, 0x7F, 0x00},
{VIACR, CR35, 0xFF, 0x00},
--
1.6.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/