Re: [PATCH 1/1] powerpc: Fix multicast problem in fs_enet driver

[Scott Wood]

On Wed, 20 Apr 2011 10:55:19 +0200
Andrea Galbusera <gizero@xxxxxxxxx> wrote:

> mac-fec.c was setting individual UDP address registers instead of multicast
> group address registers when joining a multicast group.
> This prevented from correctly receiving UDP multicast packets.
> According to datasheet, replaced hash_table_high and hash_table_low
> with grp_hash_table_high and grp_hash_table_low respectively.
> 
> Tested on a MPC5121 based board.
> 
> Signed-off-by: Andrea Galbusera <gizero@xxxxxxxxx>
> ---
>  drivers/net/fs_enet/mac-fec.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
> index 61035fc..b9fbc83 100644
> --- a/drivers/net/fs_enet/mac-fec.c
> +++ b/drivers/net/fs_enet/mac-fec.c
> @@ -226,8 +226,8 @@ static void set_multicast_finish(struct net_device *dev)
>  	}
>  
>  	FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
> -	FW(fecp, hash_table_high, fep->fec.hthi);
> -	FW(fecp, hash_table_low, fep->fec.htlo);
> +	FW(fecp, grp_hash_table_high, fep->fec.hthi);
> +	FW(fecp, grp_hash_table_low, fep->fec.htlo);
>  }
>  
>  static void set_multicast_list(struct net_device *dev)
> @@ -273,8 +273,8 @@ static void restart(struct net_device *dev)
>  	/*
>  	 * Reset all multicast.
>  	 */
> -	FW(fecp, hash_table_high, fep->fec.hthi);
> -	FW(fecp, hash_table_low, fep->fec.htlo);
> +	FW(fecp, grp_hash_table_high, fep->fec.hthi);
> +	FW(fecp, grp_hash_table_low, fep->fec.htlo);
>  
>  	/*
>  	 * Set maximum receive buffer size.

This will break on 8xx which does not have grp_hash_table_*.  It has only
one set of hash table registers which are used only for multicast -- so
8xx should have fec_hash_table_* renamed to fec_grp_hash_table_* in struct
fec.

-Scott

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/