Re: [PATCH] tty/serial: add support for Xilinx PS UART

[Greg KH]

On Tue, Apr 19, 2011 at 04:22:00PM -0600, John Linn wrote:
> > -----Original Message-----
> > From: Alan Cox [mailto:alan@xxxxxxxxxxxxxxxxxxx]
> > Sent: Tuesday, April 19, 2011 3:16 PM
> > To: John Linn
> > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-serial@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH] tty/serial: add support for Xilinx PS UART
> > 
> > On Tue, 19 Apr 2011 14:14:52 -0600
> > John Linn <john.linn@xxxxxxxxxx> wrote:
> > 
> > > The Xilinx PS Uart is used on the new ARM based SoC. This
> > > UART is not compatible with others such that a seperate
> > > driver is required.
> > 
> > Joyous. I wish people would standardise.
> > 
> > > +		 213 = /dev/ttyPS0		Xilinx PS serial port 0
> > > +		 214 = /dev/ttyPS1		Xilinx PS serial port 1
> > > +		 215 = /dev/ttyPS2		Xilinx PS serial port 2
> > > +		 216 = /dev/ttyPS3		Xilinx PS serial port 3
> > 
> > Is there a specific reason you need fixed minor numbers ? If not
> please
> > use a dynamic range and keep Linus happy.
> 
> Hi Alan,
> 
> I hope you don't mind me asking a bit more to better understand.  Here's
> my
> concerns (maybe not valid).
> 
> It seems like since this is a console it can get hard to debug with
> dynamic 
> nodes for this driver.
> 
> This driver is for an embedded device where we don't want to require
> udev 
> or mdev to assign nodes. 

Why not use devtmpfs?  There's no need to use udev or mdev at all.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/