[PATCH 1/7,v10] NUMA Hotplug Emulator: Documentation

From: Zhang, Yang Z
Date: Thu Mar 31 2011 - 10:20:12 EST


add a text file Documentation/x86/x86_64/numa_hotplug_emulator.txt
to explain the usage for the hotplug emulator.

Reviewed-By: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Signed-off-by: David Rientjes <rientjes@xxxxxxxxxx>
Signed-off-by: Haicheng Li <haicheng.li@xxxxxxxxx>
Signed-off-by: Shaohui Zheng <shaohui.zheng@xxxxxxxxx>
Signed-off-by: Yang Zhang <yang.z.zhang@xxxxxxxxx>
---
Documentation/x86/x86_64/numa_hotplug_emulator.txt | 102 ++++++++++++++++++++
1 files changed, 102 insertions(+), 0 deletions(-)
create mode 100644 Documentation/x86/x86_64/numa_hotplug_emulator.txt

diff --git a/Documentation/x86/x86_64/numa_hotplug_emulator.txt linux-hpe4/Documentation/x86/x86_64/numa_hotplug_emulator.txt
new file mode 100644
index 0000000..ca7cc42
--- /dev/null
+++ linux-hpe4/Documentation/x86/x86_64/numa_hotplug_emulator.txt
@@ -0,0 +1,102 @@
+NUMA Hotplug Emulator for x86_64
+---------------------------------------------------
+
+NUMA hotplug emulator is able to emulate NUMA Node Hotplug
+thru a pure software way. It intends to help people easily debug
+and test node/CPU/memory hotplug related stuff on a
+none-NUMA-hotplug-support machine, even a UMA machine and virtual
+environment.
+
+1) Node hotplug emulation:
+
+Adds a numa=possible=<N> command line option to set an additional N nodes
+as being possible for memory hotplug. This set of possible nodes
+control nr_node_ids and the sizes of several dynamically allocated node
+arrays.
+
+This allows memory hotplug to create new nodes for newly added memory
+rather than binding it to existing nodes.
+
+For emulation on x86, it would be possible to set aside memory for hotplugged
+nodes (say, anything above 2G) and to add an additional four nodes as being
+possible on boot with
+
+ mem=2G numa=possible=4
+
+and then creating a new 128M node at runtime:
+
+ # echo 128M@0x80000000 > /sys/kernel/debug/node_hotplug/add_node
+ On node 1 totalpages: 0
+ init_memory_mapping: 0000000080000000-0000000088000000
+ 0080000000 - 0088000000 page 2M
+
+Once the new node has been added, its memory can be onlined. If this
+memory represents memory section 16, for example:
+
+ # echo online > /sys/devices/system/memory/memory16/state
+ Built 2 zonelists in Node order, mobility grouping on. Total pages: 514846
+ Policy zone: Normal
+ [ The memory section(s) mapped to a particular node are visible via
+ /sys/devices/system/mem_hotplug/node1, in this example. ]
+
+2) CPU hotplug emulation:
+
+The emulator reserves CPUs thru grub parameter, the reserved CPUs can be
+hot-add/hot-remove in software method, it emulates the process of physical
+cpu hotplug.
+
+When hotplugging a CPU with emulator, we are using a logical CPU to emulate the
+CPU socket hotplug process. For the CPU supported SMT, some logical CPUs are in
+the same socket, but it may located in different NUMA node after we have
+emulator. We put the logical CPU into a fake CPU socket, and assign it a
+unique phys_proc_id. For the fake socket, we put one logical CPU in only.
+
+ - to hide CPUs
+ - Using boot option "maxcpus=N" hide CPUs
+ N is the number of CPUs to initialize; the reset will be hidden.
+ - Using boot option "cpu_hpe=on" to enable CPU hotplug emulation
+ when cpu_hpe is enabled, the rest CPUs will not be initialized
+
+ - to hot-add CPU to node
+ # echo node_id > /sys/devices/system/cpu/probe
+
+ - to hot-remove CPU
+ # echo cpu_id > /sys/devices/system/cpu/release
+
+3) Memory hotplug emulation:
+
+The emulator reserves memory before OS boots, the reserved memory region is
+removed from e820 table. Each online node has an add_memory interface, and
+memory can be hot-added via the per-ndoe add_memory debugfs interface.
+
+The difficulty of Memory Release is well-known, we have no plan for it until
+now.
+
+ - reserve memory thru a kernel boot paramter
+ mem=1024m
+
+ - add a memory section to node 3
+ # echo 0x40000000 > /sys/kernel/debug/node_hotplug/node3/add_memory
+ OR
+ # echo 1024m > /sys/kernel/debug/node_hotplug/node3/add_memory
+
+4) Script for hotplug testing
+
+These scripts provides convenience when we hot-add memory/cpu in batch.
+
+- Online all memory sections:
+for m in /sys/devices/system/memory/memory*;
+do
+ echo online > $m/state;
+done
+
+- CPU Online:
+for c in /sys/devices/system/cpu/cpu*;
+do
+ echo 1 > $c/online;
+done
+
+- David Rientjes <rientjes@xxxxxxxxxx>
+- Haicheng Li <haicheng.li@xxxxxxxxx>
+- Shaohui Zheng <shaohui.zheng@xxxxxxxxx>
+- Yang Zhang <yang.z.zhang@xxxxxxxxx>
--
1.7.1.1
--
best regards
yang

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/