[PATCH] mfd: call disable_irq()/enable_irq() in suspend/resume

From: wni
Date: Tue Mar 29 2011 - 02:17:06 EST


From: Wei Ni <wni@xxxxxxxxxx>

When use rtc tps6586x wakealarm to suspend/resume system,
it will show a lot error messages:
"tps6586x 4-0034: failed to read interrupt status
tps6586x 4-0034: failed reading from 0xb5"
After resume, the system will call the mfd tps6586x driver's interrupt handle
tps6586x_irq(). This handle will read tps6586x interrupt status (0xb5), but at
that time the i2c driver didn't resume yet, so the reading will be failed.
I call the disble_irq in the suspend, and enable_irq in the resume, which will
delay the delivery of the irq until the i2c driver has been resumed.

Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
---
drivers/mfd/tps6586x.c | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index b600808..c7bd96b 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -569,6 +569,22 @@ static const struct i2c_device_id tps6586x_id_table[] = {
};
MODULE_DEVICE_TABLE(i2c, tps6586x_id_table);

+#ifdef CONFIG_PM
+static int tps6586x_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ if (client->irq)
+ disable_irq(client->irq);
+ return 0;
+}
+
+static int tps6586x_resume(struct i2c_client *client)
+{
+ if (client->irq)
+ enable_irq(client->irq);
+ return 0;
+}
+#endif
+
static struct i2c_driver tps6586x_driver = {
.driver = {
.name = "tps6586x",
@@ -577,6 +593,10 @@ static struct i2c_driver tps6586x_driver = {
.probe = tps6586x_i2c_probe,
.remove = __devexit_p(tps6586x_i2c_remove),
.id_table = tps6586x_id_table,
+#ifdef CONFIG_PM
+ .suspend = tps6586x_suspend,
+ .resume = tps6586x_resume,
+#endif
};

static int __init tps6586x_init(void)
--
1.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/