[PATCH 02/13] i2c-designware: Check component type register

From: dirk . brandewie
Date: Sat Mar 12 2011 - 15:26:21 EST


From: Jean-Hugues Deschenes <jean-hugues.deschenes@xxxxxxxxxxx>

Designware component type register is checked before attaching to the device.

Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@xxxxxxxxxxx>
Signed-off-by: Dirk Brandewie <dirk.brandewie@xxxxxxxxx>
---
drivers/i2c/busses/i2c-designware.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index 040cf51..b2b2a19 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -69,6 +69,7 @@
#define DW_IC_TXFLR 0x74
#define DW_IC_RXFLR 0x78
#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_TYPE 0xfc
#define DW_IC_TX_ABRT_SOURCE 0x80

#define DW_IC_CON_MASTER 0x1
@@ -710,6 +711,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem, *ioarea;
int irq, r;
+ u32 reg;

/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -756,12 +758,19 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
r = -EBUSY;
goto err_unuse_clocks;
}
- {
- u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);

- dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
- dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ if (reg != 0x44570140) {
+ dev_err(&pdev->dev, "Unknown Synopsys component type: "
+ "0x%08x\n", reg);
+ r = -ENODEV;
+ goto err_iounmap;
}
+
+ reg = dw_readl(dev, DW_IC_COMP_PARAM_1);
+ dev->tx_fifo_depth = ((reg >> 16) & 0xff) + 1;
+ dev->rx_fifo_depth = ((reg >> 8) & 0xff) + 1;
+
i2c_dw_init(dev);

dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */
--
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/