Re: Moving staging:iio over to threaded interrupts.

[Jonathan Cameron]

On 03/08/11 10:30, Thomas Gleixner wrote:
> On Thu, 3 Mar 2011, Jonathan Cameron wrote:
>> So to my mind two solutions exist.
>> 1) A single thread per trigger.  Everything prior to the work queue
>> calls is moved into a handler that goes in the 'fast' list which stays
>> in our top half handler.  The work queue bits are called one after
>> another in the bottom half.
>>
>> 2) Allow each consumer to attach it's own thread to the trigger
>> controller and basically implement our own variant of the core threaded
>> interrupt code that allows for a list of threads rather than a single one.
>>
>> I rather like the idea of 2.  It might even end up with different
>> devices being queried from different processor cores simultaneously
>> which is quite cute.  The question is whether a simple enough
>> implementation is possible that the originators of the threaded interrupt
>> code would be happy with it (as it bypasses or would mean additions to their
>> core code).
> 
> Don't implement another threading model. Look at the trigger irq as a
> demultiplexing interrupt. So if you have several consumers of a single
> trigger, then you can implement a pseudo irq_chip and register the sub
> devices as separate interrupts.
> 
> That means your main trigger interrupt would look like this:
> 
> irqreturn_t hardirq_handler(int irq, void *dev)
> {
>      iio_trigger_dev *idev = dev;
>      int i;
> 
>      store_state_as_necessary(idev);
> 
>      for (i = 0; i < idev->nr_subirqs; i++) {
>      	    if (idev->subirqs[i].enabled)
> 		generic_handle_irq(idev->subirq_base + i);
>      }
> }
> 
> And you'd have an irq_chip implementation which does:
> 
> static void subirq_mask(struct irq_data *d)
> {
>      iio_trigger_dev *idev = irq_data_get_irq_chip_data(d);
>      int idx = d->irq - idev->subirq_base;
> 
>      idev->subirqs[idx].enabled = false;
> }
> 
> static void subirq_unmask(struct irq_data *d)
> {
>      iio_trigger_dev *idev = irq_data_get_irq_chip_data(d);
>      int idx = d->irq - idev->subirq_base;
> 
>      idev->subirqs[idx].enabled = true;
> }
> 
> static struct irq_chip subirq_chip = {
>        .name = "iiochip",
>        .mask = subirq_mask,
>        .unmask = subirq_unmask,
> };
> 
> init()
> {
> 	for_each_subirq(i)
> 		irq_set_chip_and_handler(i, &subirq_chip, handle_simple_irq);
> }
> 
> So now you can request the interrupts for your subdevices with
> request_irq or request_threaded_irq.
> 
> You can also implement #1 this way, you just mark the sub device
> interrupts as IRQ_NESTED_THREAD, and then call the handlers from the
> main trigger irq thread.
Excellent.  I hadn't thought of doing it that way at all and it certainly looks
like a much cleaner option than what we have now let alone the mess I was suggesting
above.

Will have a go at implementing this asap.

Thanks for the advice,

Jonathan

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/