Re: [PATCH OF 07/14] of: move of_irq_map_pci() into generic code

From: Grant Likely
Date: Wed Feb 16 2011 - 16:54:15 EST


On Sun, Jan 23, 2011 at 9:28 PM, Sebastian Andrzej Siewior
<bigeasy@xxxxxxxxxxxxx> wrote:
> From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
>
> There is a tiny difference between PPC32 and PPC64. Microblaze uses the
> PPC32 variant.
>
> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>

I've got this one in my devicetree/next branch which is pulled into
linux-next. I've not received an ack from Ben yet. Michal, is this
okay by you?

http://git.secretlab.ca/?p=linux-2.6.git;a=commit;h=04bea68b2f0eeebb089ecc67b618795925268b4a

g.

> ---
>  arch/microblaze/include/asm/pci-bridge.h |   12 ++++
>  arch/microblaze/include/asm/prom.h       |   15 -----
>  arch/microblaze/kernel/prom_parse.c      |   77 ---------------------------
>  arch/microblaze/pci/pci-common.c         |    1 +
>  arch/powerpc/include/asm/pci-bridge.h    |   10 ++++
>  arch/powerpc/include/asm/prom.h          |   15 -----
>  arch/powerpc/kernel/pci-common.c         |    1 +
>  arch/powerpc/kernel/prom_parse.c         |   84 ------------------------------
>  drivers/of/Kconfig                       |    6 ++
>  drivers/of/Makefile                      |    1 +
>  drivers/of/of_pci.c                      |   80 ++++++++++++++++++++++++++++
>  include/linux/of_pci.h                   |   20 +++++++
>  12 files changed, 131 insertions(+), 191 deletions(-)
>  create mode 100644 drivers/of/of_pci.c
>  create mode 100644 include/linux/of_pci.h
>
> diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
> index 0c68764..c2a40a4 100644
> --- a/arch/microblaze/include/asm/pci-bridge.h
> +++ b/arch/microblaze/include/asm/pci-bridge.h
> @@ -104,11 +104,22 @@ struct pci_controller {
>        int global_number;      /* PCI domain number */
>  };
>
> +#ifdef CONFIG_PCI
>  static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
>  {
>        return bus->sysdata;
>  }
>
> +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
> +{
> +       struct pci_controller *host;
> +
> +       if (bus->self)
> +               return pci_device_to_OF_node(bus->self);
> +       host = pci_bus_to_host(bus);
> +       return host ? host->dn : NULL;
> +}
> +
>  static inline int isa_vaddr_is_ioport(void __iomem *address)
>  {
>        /* No specific ISA handling on ppc32 at this stage, it
> @@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
>         */
>        return 0;
>  }
> +#endif
>
>  /* These are used for config access before all the PCI probing
>    has been done. */
> diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
> index 2e72af0..d0890d3 100644
> --- a/arch/microblaze/include/asm/prom.h
> +++ b/arch/microblaze/include/asm/prom.h
> @@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void);
>  /* CPU OF node matching */
>  struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
>
> -/**
> - * of_irq_map_pci - Resolve the interrupt for a PCI device
> - * @pdev:      the device whose interrupt is to be resolved
> - * @out_irq:   structure of_irq filled by this function
> - *
> - * This function resolves the PCI interrupt for a given PCI device. If a
> - * device-node exists for a given pci_dev, it will use normal OF tree
> - * walking. If not, it will implement standard swizzling and walk up the
> - * PCI tree until an device-node is found, at which point it will finish
> - * resolving using the OF tree walking.
> - */
> -struct pci_dev;
> -struct of_irq;
> -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> -
>  #endif /* __ASSEMBLY__ */
>  #endif /* __KERNEL__ */
>
> diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
> index 9ae24f4..47187cc 100644
> --- a/arch/microblaze/kernel/prom_parse.c
> +++ b/arch/microblaze/kernel/prom_parse.c
> @@ -2,88 +2,11 @@
>
>  #include <linux/kernel.h>
>  #include <linux/string.h>
> -#include <linux/pci_regs.h>
>  #include <linux/module.h>
>  #include <linux/ioport.h>
>  #include <linux/etherdevice.h>
>  #include <linux/of_address.h>
>  #include <asm/prom.h>
> -#include <asm/pci-bridge.h>
> -
> -#ifdef CONFIG_PCI
> -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> -{
> -       struct device_node *dn, *ppnode;
> -       struct pci_dev *ppdev;
> -       u32 lspec;
> -       u32 laddr[3];
> -       u8 pin;
> -       int rc;
> -
> -       /* Check if we have a device node, if yes, fallback to standard OF
> -        * parsing
> -        */
> -       dn = pci_device_to_OF_node(pdev);
> -       if (dn)
> -               return of_irq_map_one(dn, 0, out_irq);
> -
> -       /* Ok, we don't, time to have fun. Let's start by building up an
> -        * interrupt spec.  we assume #interrupt-cells is 1, which is standard
> -        * for PCI. If you do different, then don't use that routine.
> -        */
> -       rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> -       if (rc != 0)
> -               return rc;
> -       /* No pin, exit */
> -       if (pin == 0)
> -               return -ENODEV;
> -
> -       /* Now we walk up the PCI tree */
> -       lspec = pin;
> -       for (;;) {
> -               /* Get the pci_dev of our parent */
> -               ppdev = pdev->bus->self;
> -
> -               /* Ouch, it's a host bridge... */
> -               if (ppdev == NULL) {
> -                       struct pci_controller *host;
> -                       host = pci_bus_to_host(pdev->bus);
> -                       ppnode = host ? host->dn : NULL;
> -                       /* No node for host bridge ? give up */
> -                       if (ppnode == NULL)
> -                               return -EINVAL;
> -               } else
> -                       /* We found a P2P bridge, check if it has a node */
> -                       ppnode = pci_device_to_OF_node(ppdev);
> -
> -               /* Ok, we have found a parent with a device-node, hand over to
> -                * the OF parsing code.
> -                * We build a unit address from the linux device to be used for
> -                * resolution. Note that we use the linux bus number which may
> -                * not match your firmware bus numbering.
> -                * Fortunately, in most cases, interrupt-map-mask doesn't
> -                * include the bus number as part of the matching.
> -                * You should still be careful about that though if you intend
> -                * to rely on this function (you ship  a firmware that doesn't
> -                * create device nodes for all PCI devices).
> -                */
> -               if (ppnode)
> -                       break;
> -
> -               /* We can only get here if we hit a P2P bridge with no node,
> -                * let's do standard swizzling and try again
> -                */
> -               lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> -               pdev = ppdev;
> -       }
> -
> -       laddr[0] = (pdev->bus->number << 16)
> -               | (pdev->devfn << 8);
> -       laddr[1]  = laddr[2] = 0;
> -       return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_pci);
> -#endif /* CONFIG_PCI */
>
>  void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
>                unsigned long *busno, unsigned long *phys, unsigned long *size)
> diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
> index e363615..1e01a12 100644
> --- a/arch/microblaze/pci/pci-common.c
> +++ b/arch/microblaze/pci/pci-common.c
> @@ -29,6 +29,7 @@
>  #include <linux/slab.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> +#include <linux/of_pci.h>
>
>  #include <asm/processor.h>
>  #include <asm/io.h>
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 51e9e6f..edeb80f 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
>        return bus->sysdata;
>  }
>
> +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
> +{
> +       struct pci_controller *host;
> +
> +       if (bus->self)
> +               return pci_device_to_OF_node(bus->self);
> +       host = pci_bus_to_host(bus);
> +       return host ? host->dn : NULL;
> +}
> +
>  static inline int isa_vaddr_is_ioport(void __iomem *address)
>  {
>        /* No specific ISA handling on ppc32 at this stage, it
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index d727575..c189aa5 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
>  #endif
>  #define of_node_to_nid of_node_to_nid
>
> -/**
> - * of_irq_map_pci - Resolve the interrupt for a PCI device
> - * @pdev:      the device whose interrupt is to be resolved
> - * @out_irq:   structure of_irq filled by this function
> - *
> - * This function resolves the PCI interrupt for a given PCI device. If a
> - * device-node exists for a given pci_dev, it will use normal OF tree
> - * walking. If not, it will implement standard swizzling and walk up the
> - * PCI tree until an device-node is found, at which point it will finish
> - * resolving using the OF tree walking.
> - */
> -struct pci_dev;
> -struct of_irq;
> -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> -
>  extern void of_instantiate_rtc(void);
>
>  /* These includes are put at the bottom because they may contain things
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 10a44e6..eb341be 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -22,6 +22,7 @@
>  #include <linux/init.h>
>  #include <linux/bootmem.h>
>  #include <linux/of_address.h>
> +#include <linux/of_pci.h>
>  #include <linux/mm.h>
>  #include <linux/list.h>
>  #include <linux/syscalls.h>
> diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
> index c2b7a07..47187cc 100644
> --- a/arch/powerpc/kernel/prom_parse.c
> +++ b/arch/powerpc/kernel/prom_parse.c
> @@ -2,95 +2,11 @@
>
>  #include <linux/kernel.h>
>  #include <linux/string.h>
> -#include <linux/pci_regs.h>
>  #include <linux/module.h>
>  #include <linux/ioport.h>
>  #include <linux/etherdevice.h>
>  #include <linux/of_address.h>
>  #include <asm/prom.h>
> -#include <asm/pci-bridge.h>
> -
> -#ifdef CONFIG_PCI
> -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> -{
> -       struct device_node *dn, *ppnode;
> -       struct pci_dev *ppdev;
> -       u32 lspec;
> -       u32 laddr[3];
> -       u8 pin;
> -       int rc;
> -
> -       /* Check if we have a device node, if yes, fallback to standard OF
> -        * parsing
> -        */
> -       dn = pci_device_to_OF_node(pdev);
> -       if (dn) {
> -               rc = of_irq_map_one(dn, 0, out_irq);
> -               if (!rc)
> -                       return rc;
> -       }
> -
> -       /* Ok, we don't, time to have fun. Let's start by building up an
> -        * interrupt spec.  we assume #interrupt-cells is 1, which is standard
> -        * for PCI. If you do different, then don't use that routine.
> -        */
> -       rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> -       if (rc != 0)
> -               return rc;
> -       /* No pin, exit */
> -       if (pin == 0)
> -               return -ENODEV;
> -
> -       /* Now we walk up the PCI tree */
> -       lspec = pin;
> -       for (;;) {
> -               /* Get the pci_dev of our parent */
> -               ppdev = pdev->bus->self;
> -
> -               /* Ouch, it's a host bridge... */
> -               if (ppdev == NULL) {
> -#ifdef CONFIG_PPC64
> -                       ppnode = pci_bus_to_OF_node(pdev->bus);
> -#else
> -                       struct pci_controller *host;
> -                       host = pci_bus_to_host(pdev->bus);
> -                       ppnode = host ? host->dn : NULL;
> -#endif
> -                       /* No node for host bridge ? give up */
> -                       if (ppnode == NULL)
> -                               return -EINVAL;
> -               } else
> -                       /* We found a P2P bridge, check if it has a node */
> -                       ppnode = pci_device_to_OF_node(ppdev);
> -
> -               /* Ok, we have found a parent with a device-node, hand over to
> -                * the OF parsing code.
> -                * We build a unit address from the linux device to be used for
> -                * resolution. Note that we use the linux bus number which may
> -                * not match your firmware bus numbering.
> -                * Fortunately, in most cases, interrupt-map-mask doesn't include
> -                * the bus number as part of the matching.
> -                * You should still be careful about that though if you intend
> -                * to rely on this function (you ship  a firmware that doesn't
> -                * create device nodes for all PCI devices).
> -                */
> -               if (ppnode)
> -                       break;
> -
> -               /* We can only get here if we hit a P2P bridge with no node,
> -                * let's do standard swizzling and try again
> -                */
> -               lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> -               pdev = ppdev;
> -       }
> -
> -       laddr[0] = (pdev->bus->number << 16)
> -               | (pdev->devfn << 8);
> -       laddr[1]  = laddr[2] = 0;
> -       return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_pci);
> -#endif /* CONFIG_PCI */
>
>  void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
>                unsigned long *busno, unsigned long *phys, unsigned long *size)
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index 3c6e100..c71cff1 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -69,4 +69,10 @@ config OF_MDIO
>        help
>          OpenFirmware MDIO bus (Ethernet PHY) accessors
>
> +config OF_PCI
> +       def_tristate PCI
> +       depends on PCI && !SPARC
> +       help
> +         OpenFirmware PCI bus accessors
> +
>  endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index 3ab21a0..f7861ed 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C)    += of_i2c.o
>  obj-$(CONFIG_OF_NET)   += of_net.o
>  obj-$(CONFIG_OF_SPI)   += of_spi.o
>  obj-$(CONFIG_OF_MDIO)  += of_mdio.o
> +obj-$(CONFIG_OF_PCI)   += of_pci.o
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> new file mode 100644
> index 0000000..dd862d2
> --- /dev/null
> +++ b/drivers/of/of_pci.c
> @@ -0,0 +1,80 @@
> +#include <linux/kernel.h>
> +#include <linux/of_pci.h>
> +#include <asm/prom.h>
> +
> +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> +{
> +       struct device_node *dn, *ppnode;
> +       struct pci_dev *ppdev;
> +       u32 lspec;
> +       __be32 lspec_be;
> +       __be32 laddr[3];
> +       u8 pin;
> +       int rc;
> +
> +       /* Check if we have a device node, if yes, fallback to standard OF
> +        * parsing
> +        */
> +       dn = pci_device_to_OF_node(pdev);
> +       if (dn) {
> +               rc = of_irq_map_one(dn, 0, out_irq);
> +               if (!rc)
> +                       return rc;
> +       }
> +
> +       /* Ok, we don't, time to have fun. Let's start by building up an
> +        * interrupt spec.  we assume #interrupt-cells is 1, which is standard
> +        * for PCI. If you do different, then don't use that routine.
> +        */
> +       rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> +       if (rc != 0)
> +               return rc;
> +       /* No pin, exit */
> +       if (pin == 0)
> +               return -ENODEV;
> +
> +       /* Now we walk up the PCI tree */
> +       lspec = pin;
> +       for (;;) {
> +               /* Get the pci_dev of our parent */
> +               ppdev = pdev->bus->self;
> +
> +               /* Ouch, it's a host bridge... */
> +               if (ppdev == NULL) {
> +                       ppnode = pci_bus_to_OF_node(pdev->bus);
> +
> +                       /* No node for host bridge ? give up */
> +                       if (ppnode == NULL)
> +                               return -EINVAL;
> +               } else {
> +                       /* We found a P2P bridge, check if it has a node */
> +                       ppnode = pci_device_to_OF_node(ppdev);
> +               }
> +
> +               /* Ok, we have found a parent with a device-node, hand over to
> +                * the OF parsing code.
> +                * We build a unit address from the linux device to be used for
> +                * resolution. Note that we use the linux bus number which may
> +                * not match your firmware bus numbering.
> +                * Fortunately, in most cases, interrupt-map-mask doesn't
> +                * include the bus number as part of the matching.
> +                * You should still be careful about that though if you intend
> +                * to rely on this function (you ship  a firmware that doesn't
> +                * create device nodes for all PCI devices).
> +                */
> +               if (ppnode)
> +                       break;
> +
> +               /* We can only get here if we hit a P2P bridge with no node,
> +                * let's do standard swizzling and try again
> +                */
> +               lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> +               pdev = ppdev;
> +       }
> +
> +       lspec_be = cpu_to_be32(lspec);
> +       laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
> +       laddr[1]  = laddr[2] = cpu_to_be32(0);
> +       return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
> +}
> +EXPORT_SYMBOL_GPL(of_irq_map_pci);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> new file mode 100644
> index 0000000..9b0ba67
> --- /dev/null
> +++ b/include/linux/of_pci.h
> @@ -0,0 +1,20 @@
> +#ifndef __OF_PCI_H
> +#define __OF_PCI_H
> +
> +#include <linux/pci.h>
> +
> +/**
> + * of_irq_map_pci - Resolve the interrupt for a PCI device
> + * @pdev:       the device whose interrupt is to be resolved
> + * @out_irq:    structure of_irq filled by this function
> + *
> + * This function resolves the PCI interrupt for a given PCI device. If a
> + * device-node exists for a given pci_dev, it will use normal OF tree
> + * walking. If not, it will implement standard swizzling and walk up the
> + * PCI tree until an device-node is found, at which point it will finish
> + * resolving using the OF tree walking.
> + */
> +struct pci_dev;
> +struct of_irq;
> +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> +#endif
> --
> 1.7.3.2
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>



--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/