Likely race between sys_rt_sigtimedwait() and complete_signal()

From: Nikita V. Youshchenko
Date: Thu Feb 10 2011 - 02:38:52 EST


Hello linux-kernel.

Within project we are working on, we are facing a "rare" situation when
setitimer() / sigwait() - based periodic task execution hangs. "Rare"
means once per several hours for 1000 Hz timer.

For hanged thread, cat /proc/pid/status shows

...
State: S (sleeping)
...
SigPnd: 0000000000000000
ShdPnd: 0000000000002000
SigBlk: 0000000000000000
...

and SysRq - T shows

[<c015b1b0>] (__schedule+0x2fc/0x37c) from [<c015b7b8>]
(schedule+0x1c/0x30)
[<c015b7b8>] (schedule+0x1c/0x30) from [<c015b8c4>]
(schedule_timeout+0x18/0x1dc)
[<c015b8c4>] (schedule_timeout+0x18/0x1dc) from [<c004a084>]
(sys_rt_sigtimedwait+0x1b4/0x288)
[<c004a084>] (sys_rt_sigtimedwait+0x1b4/0x288) from [<c001cf00>]
(ret_fast_syscall+0x0/0x28)

All other threads have SIGALRM blocked as they should, looking
through /proc/X/status proves this.

So for some reason, SIGALRM was successfully delivered by timer, bit was
set in ShdPnd [I guess at the bottom of __send_signal()], but that still
resulted somehow in thread going to schedule() and not waking.

I guess this is some sort of race between sys_rt_sigtimedwait() and
complete_signal().

This is on embedded system running vendor 2.6.31-based kernel, moving
forward is unfortunately impossible because of hardware support issues.
However I've looked through

git log -p HEAD..linus/master -- kernel/signal.c

and did not notice anything that could be related.

Unfortunately we don't currently have resources for futher analysis -
especially with simple workarounds existing, such as switch to
timerfd-based periodic execution (which looks working without hangs).

However I guess the race we faced still exists in the current upstream
kernel, so maybe somebody on this mailing list could be interested into
looking at this?

Nikita
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/