[PATCH V2] ata: pata: Convert pr_*(DRV_NAME ...) topr_fmt/pr_<level>

From: Joe Perches
Date: Mon Jan 31 2011 - 11:39:31 EST


Commit 40d69ba029c8d5de51aaeb5358999266c482d00a
("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)")
used pr_<level>.

Add #define pr_fmt and remove DRV_NAME.
Increment driver version numbers.

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
On Mon, 2011-01-31 at 19:04 +0300, Sergei Shtylyov wrote:
> Could you also increment the driver versions?

At some point, the driver version is not very useful.
You might consider removing them altogether.

cheers, Joe

drivers/ata/pata_hpt366.c | 7 ++++---
drivers/ata/pata_hpt37x.c | 23 ++++++++++++-----------
drivers/ata/pata_hpt3x2n.c | 13 +++++++------
3 files changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 538ec38..6c77d68 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -14,6 +14,7 @@
* Look into engine reset on timeout errors. Should not be required.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/module.h>
@@ -25,7 +26,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.10"
+#define DRV_VERSION "0.6.11"

struct hpt_clock {
u8 xfer_mode;
@@ -160,8 +161,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,

while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- pr_warning(DRV_NAME ": %s is not supported for %s.\n",
- modestr, list[i]);
+ pr_warn("%s is not supported for %s\n",
+ modestr, list[i]);
return 1;
}
i++;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4c5b518..9620636 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -14,6 +14,8 @@
* Look into engine reset on timeout errors. Should not be required.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -24,7 +26,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.22"
+#define DRV_VERSION "0.6.23"

struct hpt_clock {
u8 xfer_speed;
@@ -229,8 +231,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,

while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- pr_warning(DRV_NAME ": %s is not supported for %s.\n",
- modestr, list[i]);
+ pr_warn("%s is not supported for %s\n",
+ modestr, list[i]);
return 1;
}
i++;
@@ -863,8 +865,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
chip_table = &hpt372;
break;
default:
- pr_err(DRV_NAME ": Unknown HPT366 subtype, "
- "please report (%d).\n", rev);
+ pr_err("Unknown HPT366 subtype, please report (%d)\n",
+ rev);
return -ENODEV;
}
break;
@@ -904,8 +906,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
*ppi = &info_hpt374_fn1;
break;
default:
- pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
- dev->device);
+ pr_err("PCI table is bogus, please report (%d)\n", dev->device);
return -ENODEV;
}
/* Ok so this is a chip we support */
@@ -953,7 +954,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u8 sr;
u32 total = 0;

- pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
+ pr_warn("BIOS has not set timing clocks\n");

/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -1009,7 +1010,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
(f_high << 16) | f_low | 0x100);
}
if (adjust == 8) {
- pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+ pr_err("DPLL did not stabilize!\n");
return -ENODEV;
}
if (dpll == 3)
@@ -1017,7 +1018,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
else
private_data = (void *)hpt37x_timings_50;

- pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+ pr_info("bus clock %dMHz, using %dMHz DPLL\n",
MHz[clock_slot], MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
@@ -1032,7 +1033,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (clock_slot < 2 && ppi[0] == &info_hpt370a)
ppi[0] = &info_hpt370a_33;

- pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+ pr_info("%s using %dMHz bus clock\n",
chip_table->name, MHz[clock_slot]);
}

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index eca68ca..765f136 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -15,6 +15,8 @@
* Work out best PLL policy
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -25,7 +27,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.14"
+#define DRV_VERSION "0.3.15"

enum {
HPT_PCI_FAST = (1 << 31),
@@ -418,7 +420,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
u16 sr;
u32 total = 0;

- pr_warning(DRV_NAME ": BIOS clock data not set.\n");
+ pr_warn("BIOS clock data not set\n");

/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -528,8 +530,7 @@ hpt372n:
ppi[0] = &info_hpt372n;
break;
default:
- pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
- dev->device);
+ pr_err("PCI table is bogus, please report (%d)\n", dev->device);
return -ENODEV;
}

@@ -578,11 +579,11 @@ hpt372n:
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
if (adjust == 8) {
- pr_err(DRV_NAME ": DPLL did not stabilize!\n");
+ pr_err("DPLL did not stabilize!\n");
return -ENODEV;
}

- pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
+ pr_info("bus clock %dMHz, using 66MHz DPLL\n", pci_mhz);

/*
* Set our private data up. We only need a few flags


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/