Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was2.6.38-rc2-00175-g6fb1b30)

From: Nico Schottelius
Date: Sun Jan 30 2011 - 07:09:13 EST

Next message: Russell King - ARM Linux: "Re: [PATCH] ARM: Fix SMP_ON_UP for non ARM ltd. implementations"
Previous message: Geert Uytterhoeven: "Re: [PATCH 2/2] s390: Fix possibly wrong size in strncmp (smsglucv)"
In reply to: Chris Wilson: "Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)"
Next in thread: Chris Wilson: "Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Chris Wilson [Sun, Jan 30, 2011 at 11:32:55AM +0000]:
> On Sun, 30 Jan 2011 11:32:41 +0100, Nico Schottelius <nico-kernel-20110117@xxxxxxxxxxxxxxx> wrote:
> > This time I can produce some logs, as only my primary notebook display
> > is completly broken, the external monitor is working fine.
> >
> > Attached are xorg, dmesg + kernel config.
>
> Oh no, they weren't.

Alright, it's too early in the morning. Attached now.

Additional information:
Using xrandr to switch LVDS1 off and on again "fixes"
the issue.

Cheers,

Nico

--
PGP key: 7ED9 F7D3 6B10 81D7 0EC5 5C09 D7DC C8E4 3187 7DF0

Attachment: 2.6.38-rc2-00274-g1f0324c.config.gz
Description: Binary data

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-rc2-00274-g1f0324c (nico@kr) (gcc version 4.5.2 (GCC) ) #59 SMP PREEMPT Fri Jan 28 22:18:04 CET 2011
[ 0.000000] Command line:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb282000 - 00000000bb363000 (usable)
[ 0.000000] BIOS-e820: 00000000bb363000 - 00000000bb375000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb375000 - 00000000bb3f6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb3f6000 - 00000000bb40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb40f000 - 00000000bb470000 (usable)
[ 0.000000] BIOS-e820: 00000000bb470000 - 00000000bb668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable)
[ 0.000000] BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb71f000 - 00000000bb76b000 (usable)
[ 0.000000] BIOS-e820: 00000000bb76b000 - 00000000bb777000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb777000 - 00000000bb77a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb77a000 - 00000000bb781000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb781000 - 00000000bb782000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb782000 - 00000000bb78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: 3626A14/3626A14, BIOS 6QET35WW (1.05 ) 01/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[ 0.000000] 0000000000 - 00bb800000 page 2M
[ 0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bb765000-bb76b000
[ 0.000000] ACPI: RSDP 00000000000f68f0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bb7f0a79 00094 (v01 LENOVO TP-6Q 00001050 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bb7f0c00 000F4 (v04 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bb7f0f6b 0DD9B (v01 LENOVO TP-6Q 00001050 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bb6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bb7f0db4 001B7 (v01 LENOVO TP-6Q 00001050 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bb7fed06 00052 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bb7fed58 00084 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bb7fee14 0003C (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bb7fee50 00038 (v01 LENOVO TP-6Q 00001050 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bb7fef34 000A4 (v16 LENOVO TP-6Q 00001050 PTL 00000001)
[ 0.000000] ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6Q 00001050 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bb6e590a 0085B (v01 LENOVO TP-6Q 00001050 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: DMAR 00000000bb781000 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bb779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bb778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bb777000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bb27c
[ 0.000000] 0: 0x000bb282 -> 0x000bb363
[ 0.000000] 0: 0x000bb40f -> 0x000bb470
[ 0.000000] 0: 0x000bb70f -> 0x000bb717
[ 0.000000] 0: 0x000bb71f -> 0x000bb76b
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 996257
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 748619 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bb27c000 - 00000000bb282000
[ 0.000000] PM: Registered nosave memory: 00000000bb363000 - 00000000bb375000
[ 0.000000] PM: Registered nosave memory: 00000000bb375000 - 00000000bb3f6000
[ 0.000000] PM: Registered nosave memory: 00000000bb3f6000 - 00000000bb40f000
[ 0.000000] PM: Registered nosave memory: 00000000bb470000 - 00000000bb668000
[ 0.000000] PM: Registered nosave memory: 00000000bb668000 - 00000000bb6e8000
[ 0.000000] PM: Registered nosave memory: 00000000bb6e8000 - 00000000bb70f000
[ 0.000000] PM: Registered nosave memory: 00000000bb717000 - 00000000bb71f000
[ 0.000000] PM: Registered nosave memory: 00000000bb76b000 - 00000000bb777000
[ 0.000000] PM: Registered nosave memory: 00000000bb777000 - 00000000bb77a000
[ 0.000000] PM: Registered nosave memory: 00000000bb77a000 - 00000000bb781000
[ 0.000000] PM: Registered nosave memory: 00000000bb781000 - 00000000bb782000
[ 0.000000] PM: Registered nosave memory: 00000000bb782000 - 00000000bb78b000
[ 0.000000] PM: Registered nosave memory: 00000000bb78b000 - 00000000bb78c000
[ 0.000000] PM: Registered nosave memory: 00000000bb78c000 - 00000000bb79f000
[ 0.000000] PM: Registered nosave memory: 00000000bb79f000 - 00000000bb7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bb000000 s74816 r8192 d23488 u524288
[ 0.000000] pcpu-alloc: s74816 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 978779
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3853132k/5111808k available (3932k kernel code, 1126780k absent, 131896k reserved, 2677k data, 532k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:384
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2393.651 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.30 BogoMIPS (lpj=2393651)
[ 0.000246] pid_max: default: 32768 minimum: 301
[ 0.000394] Security Framework initialized
[ 0.000817] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002004] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002549] Mount-cache hash table entries: 256
[ 0.002806] Initializing cgroup subsys debug
[ 0.002927] Initializing cgroup subsys ns
[ 0.003048] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003246] Initializing cgroup subsys cpuacct
[ 0.003372] Initializing cgroup subsys memory
[ 0.005451] Initializing cgroup subsys devices
[ 0.005570] Initializing cgroup subsys freezer
[ 0.005714] CPU: Physical Processor ID: 0
[ 0.005832] CPU: Processor Core ID: 0
[ 0.005951] mce: CPU supports 9 MCE banks
[ 0.006076] CPU0: Thermal monitoring enabled (TM1)
[ 0.006201] using mwait in idle threads.
[ 0.006379] ACPI: Core revision 20110112
[ 0.082849] Setting APIC routing to flat
[ 0.083380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093508] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02
[ 0.195087] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.195437] ... version: 3
[ 0.195571] ... bit width: 48
[ 0.195705] ... generic registers: 4
[ 0.195839] ... value mask: 0000ffffffffffff
[ 0.195976] ... max period: 000000007fffffff
[ 0.196116] ... fixed-purpose events: 3
[ 0.196251] ... event mask: 000000070000000f
[ 0.202095] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.478647] Brought up 4 CPUs
[ 0.478782] Total of 4 processors activated (19150.51 BogoMIPS).
[ 0.480513] print_constraints: dummy:
[ 0.480697] NET: Registered protocol family 16
[ 0.481134] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.481360] ACPI: bus type pci registered
[ 0.481609] PCI: Using configuration type 1 for base access
[ 0.484351] bio: create slab <bio-0> at 0
[ 0.487221] ACPI: EC: EC description table is found, configuring boot EC
[ 0.494012] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.574613] ACPI: SSDT 00000000bb71aa18 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.575562] ACPI: Dynamic OEM Table Load:
[ 0.575779] ACPI: SSDT (null) 0046F (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.576255] ACPI: SSDT 00000000bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.577224] ACPI: Dynamic OEM Table Load:
[ 0.577442] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.583775] ACPI: SSDT 00000000bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.584807] ACPI: Dynamic OEM Table Load:
[ 0.585025] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.588587] ACPI: SSDT 00000000bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.589559] ACPI: Dynamic OEM Table Load:
[ 0.589776] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.595192] ACPI: Interpreter enabled
[ 0.595328] ACPI: (supports S0 S3 S4 S5)
[ 0.595649] ACPI: Using IOAPIC for interrupt routing
[ 0.600919] ACPI: Power Resource [PUBS] (on)
[ 0.606069] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.614908] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.615050] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.615293] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.615500] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.615521] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.615540] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.615556] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.615573] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.615589] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.616043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.616252] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.616401] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.616544] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.616770] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.616994] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.617220] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.617455] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.617485] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.617496] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.617502] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.617507] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.617570] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.617598] pci 0000:00:16.0: reg 10: [mem 0xf2727800-0xf272780f 64bit]
[ 0.617673] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.617679] pci 0000:00:16.0: PME# disabled
[ 0.617717] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.617742] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.617752] pci 0000:00:19.0: reg 14: [mem 0xf2525000-0xf2525fff]
[ 0.617763] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.617834] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.617839] pci 0000:00:19.0: PME# disabled
[ 0.617869] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.617894] pci 0000:00:1a.0: reg 10: [mem 0xf2728000-0xf27283ff]
[ 0.617984] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.617989] pci 0000:00:1a.0: PME# disabled
[ 0.618019] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.618038] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.618116] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.618120] pci 0000:00:1b.0: PME# disabled
[ 0.618145] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.618220] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.618225] pci 0000:00:1c.0: PME# disabled
[ 0.618254] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.618336] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.618341] pci 0000:00:1c.3: PME# disabled
[ 0.618367] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.618446] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.618451] pci 0000:00:1c.4: PME# disabled
[ 0.618487] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.618513] pci 0000:00:1d.0: reg 10: [mem 0xf2728400-0xf27287ff]
[ 0.618603] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.618608] pci 0000:00:1d.0: PME# disabled
[ 0.618635] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.618712] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.618830] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.618857] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867]
[ 0.618869] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817]
[ 0.618880] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
[ 0.618891] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813]
[ 0.618902] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.618913] pci 0000:00:1f.2: reg 24: [mem 0xf2727000-0xf27277ff]
[ 0.618960] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.618965] pci 0000:00:1f.2: PME# disabled
[ 0.618987] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.619008] pci 0000:00:1f.3: reg 10: [mem 0xf2728800-0xf27288ff 64bit]
[ 0.619038] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.619085] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.619112] pci 0000:00:1f.6: reg 10: [mem 0xf2526000-0xf2526fff 64bit]
[ 0.619248] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.619393] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.619398] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.619406] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.619462] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.619604] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.619609] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.619616] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.619749] pci 0000:02:00.0: [8086:4238] type 0 class 0x000280
[ 0.619805] pci 0000:02:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.620000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.620026] pci 0000:02:00.0: PME# disabled
[ 0.620069] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.620210] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.620215] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.620222] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.620295] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.620446] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.620451] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.620459] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.620461] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.620464] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.620466] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.620468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.620470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.620473] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.620499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.620624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.620660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.620694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.624951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.625580] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.626188] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.626977] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.627599] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.628203] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.628978] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.629765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.630459] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.630693] vgaarb: loaded
[ 0.630938] SCSI subsystem initialized
[ 0.631155] libata version 3.00 loaded.
[ 0.631245] PCI: Using ACPI for IRQ routing
[ 0.631386] PCI: pci_cache_line_size set to 64 bytes
[ 0.631516] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.631518] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff
[ 0.631524] reserve RAM buffer: 00000000bb363000 - 00000000bbffffff
[ 0.631529] reserve RAM buffer: 00000000bb470000 - 00000000bbffffff
[ 0.631533] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff
[ 0.631536] reserve RAM buffer: 00000000bb76b000 - 00000000bbffffff
[ 0.631540] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.631693] NetLabel: Initializing
[ 0.631826] NetLabel: domain hash size = 128
[ 0.631961] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.632106] NetLabel: unlabeled traffic allowed by default
[ 0.632258] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.632774] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.634924] Switching to clocksource hpet
[ 0.635129] pnp: PnP ACPI init
[ 0.635268] ACPI: bus type pnp registered
[ 0.635364] Switched to NOHz mode on CPU #3
[ 0.635377] Switched to NOHz mode on CPU #1
[ 0.635386] Switched to NOHz mode on CPU #2
[ 0.635813] Switched to NOHz mode on CPU #0
[ 0.636669] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.636672] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.636673] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.636675] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.636677] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.636678] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.636680] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.636682] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.636684] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.636685] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.636687] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.636689] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.636690] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.636692] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.636694] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.636696] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.636697] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.636782] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.636927] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.637071] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.637227] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.637370] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.637514] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.637658] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.637802] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.637947] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.638090] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.638246] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.638390] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.638535] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.638679] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.638823] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.638968] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.638984] pnp 00:01: [bus ff]
[ 0.639060] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.639079] pnp 00:02: [bus 00-fe]
[ 0.639085] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.639087] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.639089] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.639090] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.639092] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.639094] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.639096] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.639098] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.639099] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.639101] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.639124] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.639125] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.639127] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.639129] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.639131] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.639133] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.639134] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.639136] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.639213] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.639501] pnp 00:03: [io 0x0010-0x001f]
[ 0.639503] pnp 00:03: [io 0x0090-0x009f]
[ 0.639504] pnp 00:03: [io 0x0024-0x0025]
[ 0.639506] pnp 00:03: [io 0x0028-0x0029]
[ 0.639507] pnp 00:03: [io 0x002c-0x002d]
[ 0.639509] pnp 00:03: [io 0x0030-0x0031]
[ 0.639510] pnp 00:03: [io 0x0034-0x0035]
[ 0.639512] pnp 00:03: [io 0x0038-0x0039]
[ 0.639513] pnp 00:03: [io 0x003c-0x003d]
[ 0.639515] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.639517] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.639518] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.639520] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.639521] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.639523] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.639524] pnp 00:03: [io 0x0050-0x0053]
[ 0.639526] pnp 00:03: [io 0x0072-0x0077]
[ 0.639527] pnp 00:03: [io 0x164e-0x164f]
[ 0.639529] pnp 00:03: [io 0x002e-0x002f]
[ 0.639530] pnp 00:03: [io 0x1000-0x107f]
[ 0.639532] pnp 00:03: [io 0x1180-0x11ff]
[ 0.639534] pnp 00:03: [io 0x0800-0x080f]
[ 0.639535] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.639537] pnp 00:03: [io 0x1600-0x1641]
[ 0.639540] pnp 00:03: [io 0x1644-0x167f]
[ 0.639541] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.639543] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.639545] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.639547] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.639548] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.639550] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.639640] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.639783] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.639924] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.640066] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.640221] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.640362] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.640503] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.640646] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.640788] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.640932] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.641074] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.641221] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.641364] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.641508] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.641543] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.641605] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.641616] pnp 00:05: [io 0x0000-0x000f]
[ 0.641618] pnp 00:05: [io 0x0080-0x008f]
[ 0.641620] pnp 00:05: [io 0x00c0-0x00df]
[ 0.641622] pnp 00:05: [dma 4]
[ 0.641677] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.641687] pnp 00:06: [io 0x0061]
[ 0.641745] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.641756] pnp 00:07: [io 0x00f0]
[ 0.641764] pnp 00:07: [irq 13]
[ 0.641820] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.641833] pnp 00:08: [io 0x0070-0x0071]
[ 0.641838] pnp 00:08: [irq 8]
[ 0.641897] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.641907] pnp 00:09: [io 0x0060]
[ 0.641909] pnp 00:09: [io 0x0064]
[ 0.641914] pnp 00:09: [irq 1]
[ 0.641972] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.641989] pnp 00:0a: [irq 12]
[ 0.642047] pnp 00:0a: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
[ 0.642340] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.642408] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.642941] pnp 00:0c: [mem 0xfeaff000-0xfeafffff]
[ 0.643034] system 00:0c: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.643198] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.643289] pnp: PnP ACPI: found 13 devices
[ 0.643424] ACPI: ACPI bus type pnp unregistered
[ 0.651576] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.651716] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.651859] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.652001] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.652161] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.652301] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.652448] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.652593] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.652825] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.652963] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.653115] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.653261] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.653407] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.653545] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.653689] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.653830] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.653988] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.654146] pci 0000:00:1c.0: setting latency timer to 64
[ 0.654156] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.654302] pci 0000:00:1c.3: setting latency timer to 64
[ 0.654309] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.654456] pci 0000:00:1c.4: setting latency timer to 64
[ 0.654464] pci 0000:00:1e.0: setting latency timer to 64
[ 0.654468] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.654471] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.654472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.654474] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.654476] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.654478] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.654480] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.654482] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.654484] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.654486] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.654488] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.654490] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.654492] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.654494] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.654496] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.654498] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.654532] NET: Registered protocol family 2
[ 0.654801] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.655889] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.658531] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.658960] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.659109] TCP reno registered
[ 0.659247] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.659419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.659708] NET: Registered protocol family 1
[ 0.659868] pci 0000:00:02.0: Boot video device
[ 0.659996] PCI: CLS 64 bytes, default 64
[ 0.660049] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.660203] Placing 64MB software IO TLB between ffff8800b6e7a000 - ffff8800bae7a000
[ 0.660429] software IO TLB at phys 0xb6e7a000 - 0xbae7a000
[ 0.660687] Simple Boot Flag at 0x35 set to 0x80
[ 0.662011] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.662164] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.662314] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.662460] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.662647] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.663614] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.668466] VFS: Disk quotas dquot_6.5.2
[ 0.671195] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.671639] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.673990] Btrfs loaded
[ 0.674147] msgmni has been set to 7525
[ 0.674603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.674830] io scheduler noop registered
[ 0.674964] io scheduler deadline registered (default)
[ 0.675476] intel_idle: MWAIT substates: 0x1120
[ 0.675478] intel_idle: v0.4 model 0x25
[ 0.675479] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.675902] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.676409] ACPI: AC Adapter [AC] (on-line)
[ 0.676848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.692041] ACPI: Lid Switch [LID]
[ 0.692262] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.708005] ACPI: Sleep Button [SLPB]
[ 0.708224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.708451] ACPI: Power Button [PWRF]
[ 0.708672] ACPI: acpi_idle yielding to intel_idle
[ 0.715566] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.715707] ACPI: Thermal Zone [THM0] (58 C)
[ 0.732099] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.732359] ACPI: Battery Slot [BAT0] (battery present)
[ 0.750765] Linux agpgart interface v0.103
[ 0.750994] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.751276] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.752519] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.752892] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.753159] [drm] Initialized drm 1.1.0 20060810
[ 0.753341] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.753482] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.753633] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.753778] i915 0000:00:02.0: setting latency timer to 64
[ 0.822651] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.822657] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.822829] [drm] Driver supports precise vblank timestamp query.
[ 0.953294] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.138062] fb0: inteldrmfb frame buffer device
[ 1.138201] drm: registered panic notifier
[ 1.138373] No ACPI video bus found
[ 1.138646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.140665] brd: module loaded
[ 1.140796] Uniform Multi-Platform E-IDE driver
[ 1.141015] ide-gd driver 1.18
[ 1.141384] ahci 0000:00:1f.2: version 3.0
[ 1.141399] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.141589] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.141624] ahci: SSS flag set, parallel bus scan disabled
[ 1.141808] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.142037] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst
[ 1.142283] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.149194] scsi0 : ahci
[ 1.149486] scsi1 : ahci
[ 1.149732] scsi2 : ahci
[ 1.149975] scsi3 : ahci
[ 1.150214] scsi4 : ahci
[ 1.150486] scsi5 : ahci
[ 1.151246] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 41
[ 1.151472] ata2: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727180 irq 41
[ 1.151696] ata3: DUMMY
[ 1.151824] ata4: DUMMY
[ 1.151954] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 41
[ 1.152180] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 41
[ 1.152782] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.156369] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.156515] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.156889] mousedev: PS/2 mouse device common for all mice
[ 1.157896] cpuidle: using governor ladder
[ 1.159104] cpuidle: using governor menu
[ 1.159572] TCP cubic registered
[ 1.159706] NET: Registered protocol family 17
[ 1.159863] Registering the dns_resolver key type
[ 1.161513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.166346] registered taskstats version 1
[ 1.611518] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.614117] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.614125] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.614360] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.618287] ata1.00: ATA-8: ST95005620AS, SD23, max UDMA/133
[ 1.618462] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.622778] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.622784] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.623014] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.627001] ata1.00: configured for UDMA/133
[ 1.627342] scsi 0:0:0:0: Direct-Access ATA ST95005620AS SD23 PQ: 0 ANSI: 5
[ 1.628077] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.628491] sd 0:0:0:0: [sda] Write Protect is off
[ 1.628635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.628683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.629540] sda: sda1 sda2 sda3 sda4
[ 1.630560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.661461] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.661649] Switching to clocksource tsc
[ 2.024313] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[ 2.024552] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.076388] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 2.504037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.509677] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.510621] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.514475] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
[ 2.521029] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.521913] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.526272] ata2.00: configured for UDMA/133
[ 2.644007] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
[ 2.949203] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.253664] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.256624] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 3.256873] REISERFS (device sda1): using ordered data mode
[ 3.257788] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 3.258615] REISERFS (device sda1): checking transaction log (sda1)
[ 3.263142] REISERFS (device sda1): Using r5 hash to sort names
[ 3.263478] VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
[ 3.266029] Freeing unused kernel memory: 532k freed
[ 3.266276] Write protecting the kernel read-only data: 6144k
[ 3.267811] Freeing unused kernel memory: 144k freed
[ 3.272331] Freeing unused kernel memory: 604k freed
[ 8.747886] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.015226] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5
[ 9.420539] rtc_cmos 00:08: RTC can wake from S4
[ 9.427271] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 9.427311] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 10.205606] udev[1352]: starting version 165
[ 10.396851] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.421143] wmi: Mapper loaded
[ 10.447218] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 10.447243] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 10.447689] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 10.460270] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 10.460273] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 10.460312] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 10.460324] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.460481] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 10.512523] Non-volatile memory driver v1.3
[ 10.549586] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 10.600854] cfg80211: Calling CRDA to update world regulatory domain
[ 10.604362] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.604416] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 10.615379] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:2d:f7:02:12
[ 10.615384] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.615456] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 10.615491] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 10.624977] usbcore: registered new interface driver usbfs
[ 10.624994] usbcore: registered new interface driver hub
[ 10.625164] usbcore: registered new device driver usb
[ 10.651993] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.652002] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.652505] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 10.679025] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 10.679028] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.679031] thinkpad_acpi: ThinkPad BIOS 6QET35WW (1.05 ), EC 6QHT24WW-1.05
[ 10.679033] thinkpad_acpi: Lenovo ThinkPad X201, model 3626A14
[ 10.679732] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 10.679879] thinkpad_acpi: radio switch found; radios are enabled
[ 10.680059] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.682441] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 10.682965] Registered led device: tpacpi::thinklight
[ 10.682994] Registered led device: tpacpi::power
[ 10.683008] Registered led device: tpacpi:orange:batt
[ 10.683022] Registered led device: tpacpi:green:batt
[ 10.683036] Registered led device: tpacpi::dock_active
[ 10.683051] Registered led device: tpacpi::bay_active
[ 10.683072] Registered led device: tpacpi::dock_batt
[ 10.683092] Registered led device: tpacpi::unknown_led
[ 10.683113] Registered led device: tpacpi::standby
[ 10.683138] Registered led device: tpacpi::dock_status1
[ 10.683158] Registered led device: tpacpi::dock_status2
[ 10.683182] Registered led device: tpacpi::unknown_led2
[ 10.683205] Registered led device: tpacpi::unknown_led3
[ 10.683221] Registered led device: tpacpi::thinkvantage
[ 10.683222] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 10.686865] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.688470] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 10.752190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.752230] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 10.752237] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 10.752247] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 10.752289] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 10.752294] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 10.752304] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 10.756739] ehci_hcd 0000:00:1a.0: debug port 2
[ 10.760630] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 10.760662] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2728000
[ 10.769681] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 10.769857] hub 1-0:1.0: USB hub found
[ 10.769862] hub 1-0:1.0: 3 ports detected
[ 10.769938] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 10.769943] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 10.769952] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 10.769985] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.769989] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 10.769994] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 10.773683] ehci_hcd 0000:00:1d.0: debug port 2
[ 10.777558] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 10.777568] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2728400
[ 10.786631] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.786780] hub 2-0:1.0: USB hub found
[ 10.786785] hub 2-0:1.0: 3 ports detected
[ 10.796380] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.821693] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.821773] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 10.821803] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.894207] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 10.894210] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 10.894319] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.894356] iwlagn 0000:02:00.0: setting latency timer to 64
[ 10.894485] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 10.903523] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 10.911735] iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 10.911739] iwlagn 0000:02:00.0: Device SKU: 0Xb
[ 10.911742] iwlagn 0000:02:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 10.911769] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.912260] iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
[ 10.940286] iwlagn 0000:02:00.0: loaded firmware version 9.193.4.1 build 19710
[ 11.008659] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.071155] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 11.185600] hub 1-1:1.0: USB hub found
[ 11.185658] hub 1-1:1.0: 6 ports detected
[ 11.209370] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx
[ 11.287774] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 11.347964] padlock_aes: VIA PadLock not detected.
[ 11.351280] padlock_sha: VIA PadLock Hash Engine not detected.
[ 11.403499] hub 2-1:1.0: USB hub found
[ 11.403674] hub 2-1:1.0: 8 ports detected
[ 11.477561] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[ 11.637452] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[ 11.767840] Bluetooth: Core ver 2.15
[ 11.768026] NET: Registered protocol family 31
[ 11.768028] Bluetooth: HCI device and connection manager initialized
[ 11.768031] Bluetooth: HCI socket layer initialized
[ 11.790453] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.790621] usbcore: registered new interface driver btusb
[ 11.800021] usb 1-1.5: new high speed USB device using ehci_hcd and address 5
[ 11.885938] hub 1-1.5:1.0: USB hub found
[ 11.886109] hub 1-1.5:1.0: 4 ports detected
[ 11.959920] usb 1-1.6: new high speed USB device using ehci_hcd and address 6
[ 12.102212] Linux video capture interface: v2.00
[ 12.115641] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[ 12.117177] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 12.117267] usbcore: registered new interface driver uvcvideo
[ 12.117271] USB Video Class driver (v1.0.0)
[ 12.124438] usb 2-1.1: new high speed USB device using ehci_hcd and address 3
[ 12.495432] usbcore: registered new interface driver uas
[ 12.498629] usbcore: registered new interface driver libusual
[ 12.509225] Initializing USB Mass Storage driver...
[ 12.509544] scsi6 : usb-storage 2-1.1:1.0
[ 12.510141] usbcore: registered new interface driver usb-storage
[ 12.510148] USB Mass Storage support registered.
[ 13.510783] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.511243] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.166154] sd 6:0:0:0: [sdb] 7741440 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 14.166994] sd 6:0:0:0: [sdb] Write Protect is off
[ 14.167003] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 14.168345] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.168351] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.172312] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.172319] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.173236] sdb: sdb1
[ 14.176406] sd 6:0:0:0: [sdb] No Caching mode page present
[ 14.176411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.176416] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 17.588241] usb 1-1.5.4: new high speed USB device using ehci_hcd and address 7
[ 17.675182] usb-storage 1-1.5.4:1.0: Quirks match for vid 1058 pid 0704: 8000
[ 17.675256] scsi7 : usb-storage 1-1.5.4:1.0
[ 18.673795] scsi 7:0:0:0: Direct-Access WD 5000BMV External 1.75 PQ: 0 ANSI: 4
[ 18.674007] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 18.674509] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 18.675128] sd 7:0:0:0: [sdc] Write Protect is off
[ 18.675131] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 18.675892] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.675896] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.677871] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.677874] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.711337] sdc: unknown partition table
[ 18.713311] sd 7:0:0:0: [sdc] No Caching mode page present
[ 18.713315] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 18.713318] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 19.675401] REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
[ 19.675441] REISERFS (device dm-1): using ordered data mode
[ 19.675852] REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 19.676323] REISERFS (device dm-1): checking transaction log (dm-1)
[ 19.722716] REISERFS (device dm-1): Using r5 hash to sort names
[ 21.292152] ------------[ cut here ]------------
[ 21.292166] WARNING: at kernel/printk.c:430 do_syslog+0x427/0x452()
[ 21.292170] Hardware name: 3626A14
[ 21.292173] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated and denied).
[ 21.292177] Modules linked in: usb_storage usb_libusual uas uvcvideo videodev v4l2_compat_ioctl32 btusb bluetooth sha256_generic aesni_intel cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 ecb snd_hda_codec_hdmi snd_hda_codec_conexant iwlagn iwlcore snd_hda_intel snd_pcm_oss snd_hda_codec ehci_hcd mac80211 snd_hwdep thinkpad_acpi snd_pcm snd_mixer_oss sr_mod hwmon usbcore snd_timer sg cfg80211 snd tpm_tis soundcore i2c_i801 tpm tpm_bios nvram cdrom snd_page_alloc e1000e intel_ips joydev rfkill wmi mac_hid kvm_intel pcspkr kvm rtc_cmos rtc_core rtc_lib
[ 21.292255] Pid: 2146, comm: syslog-ng Not tainted 2.6.38-rc2-00274-g1f0324c #59
[ 21.292258] Call Trace:
[ 21.292267] [<ffffffff81039ac4>] ? warn_slowpath_common+0x80/0x98
[ 21.292276] [<ffffffff81120950>] ? kmsg_release+0x0/0x18
[ 21.292282] [<ffffffff81039b70>] ? warn_slowpath_fmt+0x41/0x43
[ 21.292289] [<ffffffff8111cde6>] ? proc_lookup_de+0xae/0xca
[ 21.292295] [<ffffffff8103a3d9>] ? do_syslog+0x427/0x452
[ 21.292301] [<ffffffff81118224>] ? proc_root_lookup+0x1b/0x3b
[ 21.292308] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292313] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292319] [<ffffffff81120950>] ? kmsg_release+0x0/0x18
[ 21.292325] [<ffffffff8112097f>] ? kmsg_open+0x17/0x19
[ 21.292332] [<ffffffff81117963>] ? proc_reg_open+0xa3/0x144
[ 21.292337] [<ffffffff81120968>] ? kmsg_open+0x0/0x19
[ 21.292343] [<ffffffff811178c0>] ? proc_reg_open+0x0/0x144
[ 21.292351] [<ffffffff810cffa4>] ? __dentry_open+0x168/0x282
[ 21.292357] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292363] [<ffffffff810d0d02>] ? nameidata_to_filp+0x50/0x57
[ 21.292370] [<ffffffff810dcedc>] ? finish_open+0x9d/0x16a
[ 21.292375] [<ffffffff810dc8a5>] ? do_path_lookup+0x8b/0xf2
[ 21.292381] [<ffffffff810dd41b>] ? do_filp_open+0x189/0x671
[ 21.292387] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292393] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292401] [<ffffffff810e88b4>] ? vfsmount_lock_local_unlock+0x2b/0x48
[ 21.292406] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292412] [<ffffffff81032b68>] ? get_parent_ip+0x11/0x41
[ 21.292417] [<ffffffff81032c2a>] ? sub_preempt_count+0x92/0xa5
[ 21.292427] [<ffffffff813d3d0a>] ? _raw_spin_unlock+0x10/0x2b
[ 21.292433] [<ffffffff810e78d2>] ? alloc_fd+0x106/0x118
[ 21.292440] [<ffffffff811f735d>] ? strncpy_from_user+0x34/0x37
[ 21.292446] [<ffffffff810d0d64>] ? do_sys_open+0x5b/0xf4
[ 21.292452] [<ffffffff810d0e18>] ? sys_open+0x1b/0x1d
[ 21.292458] [<ffffffff8100293b>] ? system_call_fastpath+0x16/0x1b
[ 21.292463] ---[ end trace d71955adaf8dccff ]---
[ 21.509339] NET: Registered protocol family 10
[ 21.515752] sshd (2181): /proc/2181/oom_adj is deprecated, please use /proc/2181/oom_score_adj instead.
[ 36.453766] Console: switching to colour frame buffer device 160x50
[ 48.999091] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 49.049813] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 49.050517] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.914871] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 50.914876] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 50.915226] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.915297] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 50.915302] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 61.815638] eth0: no IPv6 routers present
[ 108.887226] RPC: Registered udp transport module.
[ 108.887229] RPC: Registered tcp transport module.
[ 108.887230] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 108.924792] FS-Cache: Loaded
[ 108.962925] Registering the id_resolver key type
[ 108.962940] FS-Cache: Netfs 'nfs' registered for caching
[ 177.492520] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 322.591079] cupsd[2269]: segfault at 0 ip 00007fa7784d878d sp 00007fffa04cd9f0 error 4 in cupsd[7fa77849c000+62000]
[10625.174444] usb 1-1.4: USB disconnect, address 4
[10625.284218] PM: Syncing filesystems ... done.
[10625.834442] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10625.845423] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10625.856526] Suspending console(s) (use no_console_suspend to debug)
[10626.048024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10626.103618] sd 0:0:0:0: [sda] Stopping disk
[10626.297920] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[10626.297977] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[10626.312559] i915 0000:00:02.0: power state changed by ACPI to D3
[10626.485306] e1000e 0000:00:19.0: PCI INT A disabled
[10626.485314] e1000e 0000:00:19.0: PME# enabled
[10626.485324] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[10626.499618] HDA Intel 0000:00:1b.0: PCI INT B disabled
[10626.757929] PM: suspend of devices complete after 902.672 msecs
[10626.779830] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[10626.795740] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[10626.795895] PM: late suspend of devices complete after 38.026 msecs
[10626.796035] ACPI: Preparing to enter system sleep state S3
[10626.845741] PM: Saving platform NVS memory
[10626.850448] Disabling non-boot CPUs ...
[10626.865289] CPU 1 is now offline
[10626.882930] CPU 2 is now offline
[10626.892768] CPU 3 is now offline
[10626.893096] Extended CMOS year: 2000
[10626.893374] Back to C!
[10626.893378] PM: Restoring platform NVS memory
[10626.893997] Extended CMOS year: 2000
[10626.894018] Enabling non-boot CPUs ...
[10626.895455] Booting Node 0 Processor 1 APIC 0x1
[10626.987292] Switched to NOHz mode on CPU #1
[10627.007406] CPU1 is up
[10627.007497] Booting Node 0 Processor 2 APIC 0x4
[10627.099072] Switched to NOHz mode on CPU #2
[10627.119186] CPU2 is up
[10627.119283] Booting Node 0 Processor 3 APIC 0x5
[10627.210944] Switched to NOHz mode on CPU #3
[10627.231145] CPU3 is up
[10627.232516] ACPI: Waking up from system sleep state S3
[10627.314895] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900006)
[10627.314910] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[10627.315020] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.315038] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728000)
[10627.315046] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10627.319740] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.319751] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.319869] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[10627.319964] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[10627.319975] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[10627.319979] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf240f240)
[10627.319983] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x200000f0)
[10627.319992] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10627.319998] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[10627.320033] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.320052] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728400)
[10627.320059] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[10627.320077] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.320081] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.320190] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[10627.320256] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[10627.320278] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[10627.320554] PM: early resume of devices complete after 5.785 msecs
[10627.320878] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.320888] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[10627.320905] e1000e 0000:00:19.0: PME# disabled
[10627.320910] pci 0000:00:1e.0: setting latency timer to 64
[10627.321001] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.321019] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[10627.321034] HDA Intel 0000:00:1b.0: setting latency timer to 64
[10627.321104] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[10627.321184] ahci 0000:00:1f.2: setting latency timer to 64
[10627.321187] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[10627.321190] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[10627.321204] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[10627.321207] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[10627.321224] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[10627.321230] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[10627.321312] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[10627.321357] i915 0000:00:02.0: power state changed by ACPI to D0
[10627.321363] i915 0000:00:02.0: power state changed by ACPI to D0
[10627.321369] i915 0000:00:02.0: setting latency timer to 64
[10627.322724] sd 0:0:0:0: [sda] Starting disk
[10627.345649] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 20425, limit 9000
[10627.516702] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
[10627.516862] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
[10627.535575] usb 1-1.3: reset full speed USB device using ehci_hcd and address 3
[10627.570055] [drm:ironlake_fdi_link_train] *ERROR* FDI train 1 fail!
[10627.570215] [drm:ironlake_fdi_link_train] *ERROR* FDI train 2 fail!
[10627.627184] ata6: SATA link down (SStatus 0 SControl 300)
[10627.630195] ata5: SATA link down (SStatus 0 SControl 300)
[10627.662174] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[10627.662179] PM: Device 00:0c failed to resume: error -19
[10627.675185] No ACPI video bus found
[10627.693364] usb 1-1.6: reset high speed USB device using ehci_hcd and address 6
[10627.780006] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10627.785389] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[10627.786320] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[10627.796706] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[10627.797613] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[10627.801510] ata2.00: configured for UDMA/133
[10627.855081] usb 2-1.1: reset high speed USB device using ehci_hcd and address 3
[10629.035816] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[10629.035819] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[10629.276289] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[10629.276299] serio: Synaptics pass-through port at isa0060/serio1/input0
[10629.327832] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[10630.942458] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10630.957475] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10630.957483] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10630.957489] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10630.962179] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[10630.962185] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10630.962191] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10630.964958] ata1.00: configured for UDMA/133
[10630.990593] PM: resume of devices complete after 3676.263 msecs
[10630.990767] Restarting tasks ... done.
[10631.589470] usb 1-1.4: new full speed USB device using ehci_hcd and address 8
[10636.013771] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[10636.275203] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio3/input/input11
[ 36.065]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 36.067] X Protocol Version 11, Revision 0
[ 36.067] Build Operating System: Linux 2.6.35-ARCH x86_64
[ 36.067] Current Operating System: Linux kr 2.6.38-rc2-00274-g1f0324c #59 SMP PREEMPT Fri Jan 28 22:18:04 CET 2011 x86_64
[ 36.067] Kernel command line:
[ 36.067] Build Date: 01 November 2010 10:29:19PM
[ 36.068]
[ 36.068] Current version of pixman: 0.20.2
[ 36.068] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 36.068] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.070] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 29 22:45:54 2011
[ 36.087] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 36.090] (==) No Layout section. Using the first Screen section.
[ 36.090] (==) No screen section available. Using defaults.
[ 36.090] (**) |-->Screen "Default Screen Section" (0)
[ 36.090] (**) | |-->Monitor "<default monitor>"
[ 36.090] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 36.090] (==) Automatically adding devices
[ 36.090] (==) Automatically enabling devices
[ 36.104] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 36.104] Entry deleted from font path.
[ 36.113] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 36.113] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.113] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.113] (II) Loader magic: 0x7d3360
[ 36.113] (II) Module ABI versions:
[ 36.113] X.Org ANSI C Emulation: 0.4
[ 36.113] X.Org Video Driver: 8.0
[ 36.113] X.Org XInput driver : 11.0
[ 36.113] X.Org Server Extension : 4.0
[ 36.114] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 36.114] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 36.114] (II) LoadModule: "extmod"
[ 36.122] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 36.125] (II) Module extmod: vendor="X.Org Foundation"
[ 36.125] compiled for 1.9.2, module version = 1.0.0
[ 36.125] Module class: X.Org Server Extension
[ 36.125] ABI class: X.Org Server Extension, version 4.0
[ 36.125] (II) Loading extension MIT-SCREEN-SAVER
[ 36.126] (II) Loading extension XFree86-VidModeExtension
[ 36.126] (II) Loading extension XFree86-DGA
[ 36.126] (II) Loading extension DPMS
[ 36.126] (II) Loading extension XVideo
[ 36.126] (II) Loading extension XVideo-MotionCompensation
[ 36.126] (II) Loading extension X-Resource
[ 36.126] (II) LoadModule: "dbe"
[ 36.126] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 36.128] (II) Module dbe: vendor="X.Org Foundation"
[ 36.128] compiled for 1.9.2, module version = 1.0.0
[ 36.128] Module class: X.Org Server Extension
[ 36.128] ABI class: X.Org Server Extension, version 4.0
[ 36.128] (II) Loading extension DOUBLE-BUFFER
[ 36.128] (II) LoadModule: "glx"
[ 36.129] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.148] (II) Module glx: vendor="X.Org Foundation"
[ 36.148] compiled for 1.9.2, module version = 1.0.0
[ 36.148] ABI class: X.Org Server Extension, version 4.0
[ 36.149] (==) AIGLX enabled
[ 36.149] (II) Loading extension GLX
[ 36.152] (II) LoadModule: "record"
[ 36.153] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 36.153] (II) Module record: vendor="X.Org Foundation"
[ 36.153] compiled for 1.9.2, module version = 1.13.0
[ 36.153] Module class: X.Org Server Extension
[ 36.153] ABI class: X.Org Server Extension, version 4.0
[ 36.153] (II) Loading extension RECORD
[ 36.153] (II) LoadModule: "dri"
[ 36.154] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 36.167] (II) Module dri: vendor="X.Org Foundation"
[ 36.167] compiled for 1.9.2, module version = 1.0.0
[ 36.167] ABI class: X.Org Server Extension, version 4.0
[ 36.167] (II) Loading extension XFree86-DRI
[ 36.167] (II) LoadModule: "dri2"
[ 36.167] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.167] (II) Module dri2: vendor="X.Org Foundation"
[ 36.167] compiled for 1.9.2, module version = 1.2.0
[ 36.167] ABI class: X.Org Server Extension, version 4.0
[ 36.167] (II) Loading extension DRI2
[ 36.168] (==) Matched intel as autoconfigured driver 0
[ 36.168] (==) Matched vesa as autoconfigured driver 1
[ 36.168] (==) Matched fbdev as autoconfigured driver 2
[ 36.168] (==) Assigned the driver to the xf86ConfigLayout
[ 36.168] (II) LoadModule: "intel"
[ 36.168] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.188] (II) Module intel: vendor="X.Org Foundation"
[ 36.188] compiled for 1.9.0.901, module version = 2.13.0
[ 36.188] Module class: X.Org Video Driver
[ 36.188] ABI class: X.Org Video Driver, version 8.0
[ 36.188] (II) LoadModule: "vesa"
[ 36.189] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.190] (II) Module vesa: vendor="X.Org Foundation"
[ 36.190] compiled for 1.9.0, module version = 2.3.0
[ 36.190] Module class: X.Org Video Driver
[ 36.190] ABI class: X.Org Video Driver, version 8.0
[ 36.190] (II) LoadModule: "fbdev"
[ 36.190] (WW) Warning, couldn't open module fbdev
[ 36.190] (II) UnloadModule: "fbdev"
[ 36.190] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 36.191] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 36.191] (II) VESA: driver for VESA chipsets: vesa
[ 36.191] (--) using VT number 7

[ 36.220] (WW) Falling back to old probe method for vesa
[ 36.220] drmOpenDevice: node name is /dev/dri/card0
[ 36.220] drmOpenDevice: open result is 8, (OK)
[ 36.327] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 36.328] drmOpenDevice: node name is /dev/dri/card0
[ 36.328] drmOpenDevice: open result is 8, (OK)
[ 36.328] drmOpenByBusid: drmOpenMinor returns 8
[ 36.328] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 36.328] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.328] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 36.328] (==) intel(0): RGB weight 888
[ 36.328] (==) intel(0): Default visual is TrueColor
[ 36.328] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 36.328] (--) intel(0): Chipset: "Arrandale"
[ 36.328] (**) intel(0): Tiling enabled
[ 36.328] (**) intel(0): SwapBuffers wait enabled
[ 36.328] (==) intel(0): video overlay key set to 0x101fe
[ 36.330] (II) intel(0): Output LVDS1 has no monitor section
[ 36.331] (II) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
[ 36.331] (II) intel(0): Output VGA1 has no monitor section
[ 36.454] (II) intel(0): Output HDMI1 has no monitor section
[ 36.455] (II) intel(0): Output DP1 has no monitor section
[ 36.455] (II) intel(0): EDID for output LVDS1
[ 36.455] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0
[ 36.455] (II) intel(0): Year: 2009 Week: 1
[ 36.455] (II) intel(0): EDID Version: 1.3
[ 36.455] (II) intel(0): Digital Display Input
[ 36.455] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 36.455] (II) intel(0): Gamma: 2.20
[ 36.455] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 36.455] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.455] (II) intel(0): First detailed timing is preferred mode
[ 36.455] (II) intel(0): redX: 0.560 redY: 0.350 greenX: 0.345 greenY: 0.560
[ 36.455] (II) intel(0): blueX: 0.150 blueY: 0.105 whiteX: 0.313 whiteY: 0.329
[ 36.456] (II) intel(0): Manufacturer's mask: 0
[ 36.456] (II) intel(0): Supported detailed timing:
[ 36.456] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 36.456] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1403 h_border: 0
[ 36.456] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 821 v_border: 0
[ 36.456] (II) intel(0): Supported detailed timing:
[ 36.456] (II) intel(0): clock: 57.6 MHz Image Size: 261 x 163 mm
[ 36.456] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1403 h_border: 0
[ 36.456] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 821 v_border: 0
[ 36.456] (II) intel(0): Unknown vendor-specific block f
[ 36.456] (II) intel(0): B121EW09 V3
[ 36.456] (II) intel(0): EDID (in hex):
[ 36.456] (II) intel(0): 00ffffffffffff0030ae114000000000
[ 36.456] (II) intel(0): 01130103801a1078ea65858f59588f26
[ 36.456] (II) intel(0): 1b505400000001010101010101010101
[ 36.456] (II) intel(0): 010101010101121b007b502015303020
[ 36.456] (II) intel(0): 360005a3100000187f16007b50201530
[ 36.456] (II) intel(0): 3020360005a3100000180000000f0081
[ 36.456] (II) intel(0): 0a3c810a3216090006af5633000000fe
[ 36.456] (II) intel(0): 004231323145573039205633200a009b
[ 36.456] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 36.456] (II) intel(0): Printing DDC gathered Modelines:
[ 36.456] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 36.456] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 36.457] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 36.457] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 36.457] (II) intel(0): Printing probed modes for output LVDS1
[ 36.457] (II) intel(0): Modeline "1280x800"x60.2 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 36.457] (II) intel(0): Modeline "1280x800"x50.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 36.457] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.457] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.457] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.457] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.457] (II) intel(0): EDID for output VGA1
[ 36.581] (II) intel(0): EDID for output HDMI1
[ 36.581] (II) intel(0): Manufacturer: SAM Model: 5c4 Serial#: 1162228275
[ 36.581] (II) intel(0): Year: 2009 Week: 46
[ 36.581] (II) intel(0): EDID Version: 1.3
[ 36.581] (II) intel(0): Digital Display Input
[ 36.581] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 36.581] (II) intel(0): Gamma: 2.20
[ 36.581] (II) intel(0): DPMS capabilities: Off
[ 36.581] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.581] (II) intel(0): First detailed timing is preferred mode
[ 36.581] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.150 greenY: 0.060
[ 36.581] (II) intel(0): blueX: 0.300 blueY: 0.600 whiteX: 0.312 whiteY: 0.329
[ 36.581] (II) intel(0): Supported established timings:
[ 36.581] (II) intel(0): 640x480@60Hz
[ 36.581] (II) intel(0): 800x600@56Hz
[ 36.581] (II) intel(0): 800x600@60Hz
[ 36.581] (II) intel(0): 1024x768@60Hz
[ 36.581] (II) intel(0): Manufacturer's mask: 0
[ 36.581] (II) intel(0): Supported standard timings:
[ 36.581] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 36.581] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 36.581] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 36.581] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 36.581] (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 36.581] (II) intel(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 36.581] (II) intel(0): Supported detailed timing:
[ 36.581] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 36.581] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 36.581] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 36.582] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 36.582] (II) intel(0): Monitor name: SyncMaster
[ 36.582] (II) intel(0): Serial No: H9MSB08508
[ 36.582] (II) intel(0): EDID (in hex):
[ 36.582] (II) intel(0): 00ffffffffffff004c2dc40533324645
[ 36.582] (II) intel(0): 2e13010380331d782ae9e1a354260f4c
[ 36.582] (II) intel(0): 9950542308008100814081809500a940
[ 36.582] (II) intel(0): b30001010101023a801871382d40582c
[ 36.582] (II) intel(0): 4500fe1f1100001e000000fd00383c1e
[ 36.582] (II) intel(0): 5111000a202020202020000000fc0053
[ 36.582] (II) intel(0): 796e634d61737465720a2020000000ff
[ 36.582] (II) intel(0): 0048394d534230383530380a20200041
[ 36.582] (II) intel(0): Printing probed modes for output HDMI1
[ 36.582] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 36.582] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 36.582] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 36.582] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 36.582] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 36.582] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 36.582] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 36.582] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 36.582] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.582] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.582] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.583] (II) intel(0): EDID for output DP1
[ 36.583] (II) intel(0): Output LVDS1 connected
[ 36.583] (II) intel(0): Output VGA1 disconnected
[ 36.583] (II) intel(0): Output HDMI1 connected
[ 36.583] (II) intel(0): Output DP1 disconnected
[ 36.583] (II) intel(0): Using exact sizes for initial modes
[ 36.583] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 36.583] (II) intel(0): Output HDMI1 using initial mode 1280x800
[ 36.583] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 36.583] (II) intel(0): Kernel page flipping support detected, enabling
[ 36.583] (**) intel(0): Display dimensions: (260, 160) mm
[ 36.583] (**) intel(0): DPI set to (125, 127)
[ 36.583] (II) Loading sub module "fb"
[ 36.583] (II) LoadModule: "fb"
[ 36.584] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.587] (II) Module fb: vendor="X.Org Foundation"
[ 36.587] compiled for 1.9.2, module version = 1.0.0
[ 36.587] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.587] (II) UnloadModule: "vesa"
[ 36.587] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 36.587] (==) Depth 24 pixmap format is 32 bpp
[ 36.588] (==) intel(0): VideoRam: 262144 KB
[ 36.588] (II) intel(0): [DRI2] Setup complete
[ 36.588] (II) intel(0): [DRI2] DRI driver: i965
[ 36.588] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 36.604] (II) UXA(0): Driver registered support for the following operations:
[ 36.604] (II) solid
[ 36.604] (II) copy
[ 36.604] (II) composite (RENDER acceleration)
[ 36.604] (II) put_image
[ 36.604] (II) get_image
[ 36.604] (==) intel(0): Backing store disabled
[ 36.604] (==) intel(0): Silken mouse enabled
[ 36.605] (II) intel(0): Initializing HW Cursor
[ 36.802] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 36.802] (==) intel(0): DPMS enabled
[ 36.802] (==) intel(0): Intel XvMC decoder enabled
[ 36.802] (II) intel(0): Set up textured video
[ 36.802] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 36.802] (II) intel(0): direct rendering: DRI2 Enabled
[ 36.803] (--) RandR disabled
[ 36.803] (II) Initializing built-in extension Generic Event Extension
[ 36.803] (II) Initializing built-in extension SHAPE
[ 36.803] (II) Initializing built-in extension MIT-SHM
[ 36.803] (II) Initializing built-in extension XInputExtension
[ 36.803] (II) Initializing built-in extension XTEST
[ 36.803] (II) Initializing built-in extension BIG-REQUESTS
[ 36.803] (II) Initializing built-in extension SYNC
[ 36.803] (II) Initializing built-in extension XKEYBOARD
[ 36.803] (II) Initializing built-in extension XC-MISC
[ 36.803] (II) Initializing built-in extension SECURITY
[ 36.803] (II) Initializing built-in extension XINERAMA
[ 36.803] (II) Initializing built-in extension XFIXES
[ 36.803] (II) Initializing built-in extension RENDER
[ 36.803] (II) Initializing built-in extension RANDR
[ 36.803] (II) Initializing built-in extension COMPOSITE
[ 36.803] (II) Initializing built-in extension DAMAGE
[ 36.884] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 36.884] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 36.884] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 36.884] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 36.884] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 36.885] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 36.885] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 36.885] (II) intel(0): Setting screen physical size to 338 x 211
[ 37.154] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 37.154] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 37.154] (II) LoadModule: "evdev"
[ 37.154] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 37.155] (II) Module evdev: vendor="X.Org Foundation"
[ 37.155] compiled for 1.9.0, module version = 2.5.0
[ 37.155] Module class: X.Org XInput Driver
[ 37.155] ABI class: X.Org XInput driver, version 11.0
[ 37.156] (**) Power Button: always reports core events
[ 37.156] (**) Power Button: Device: "/dev/input/event2"
[ 37.165] (--) Power Button: Found keys
[ 37.165] (II) Power Button: Configuring as keyboard
[ 37.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 37.165] (**) Option "xkb_rules" "evdev"
[ 37.165] (**) Option "xkb_model" "evdev"
[ 37.165] (**) Option "xkb_layout" "us"
[ 37.205] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 37.205] (II) No input driver/identifier specified (ignoring)
[ 37.205] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 37.205] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 37.205] (**) Sleep Button: always reports core events
[ 37.205] (**) Sleep Button: Device: "/dev/input/event1"
[ 37.210] (--) Sleep Button: Found keys
[ 37.210] (II) Sleep Button: Configuring as keyboard
[ 37.210] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 37.210] (**) Option "xkb_rules" "evdev"
[ 37.210] (**) Option "xkb_model" "evdev"
[ 37.210] (**) Option "xkb_layout" "us"
[ 37.215] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 37.215] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 37.215] (**) Integrated Camera: always reports core events
[ 37.215] (**) Integrated Camera: Device: "/dev/input/event9"
[ 37.220] (--) Integrated Camera: Found keys
[ 37.220] (II) Integrated Camera: Configuring as keyboard
[ 37.220] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 37.220] (**) Option "xkb_rules" "evdev"
[ 37.220] (**) Option "xkb_model" "evdev"
[ 37.220] (**) Option "xkb_layout" "us"
[ 37.220] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 37.220] (II) No input driver/identifier specified (ignoring)
[ 37.227] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 37.227] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 37.227] (**) AT Translated Set 2 keyboard: always reports core events
[ 37.227] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 37.233] (--) AT Translated Set 2 keyboard: Found keys
[ 37.233] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 37.233] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 37.233] (**) Option "xkb_rules" "evdev"
[ 37.233] (**) Option "xkb_model" "evdev"
[ 37.233] (**) Option "xkb_layout" "us"
[ 37.233] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 37.233] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 37.234] (II) LoadModule: "synaptics"
[ 37.234] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 37.236] (II) Module synaptics: vendor="X.Org Foundation"
[ 37.236] compiled for 1.9.2, module version = 1.3.0
[ 37.236] Module class: X.Org XInput Driver
[ 37.236] ABI class: X.Org XInput driver, version 11.0
[ 37.236] (II) Synaptics touchpad driver version 1.3.0
[ 37.236] (**) Option "Device" "/dev/input/event4"
[ 37.267] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 37.267] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 37.267] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 37.267] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 37.267] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 37.267] (**) Option "TapButton1" "1"
[ 37.267] (**) Option "TapButton2" "2"
[ 37.267] (**) Option "TapButton3" "3"
[ 37.288] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 37.288] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 37.297] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 37.297] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 37.297] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 37.297] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 37.312] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 37.312] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 37.312] (II) No input driver/identifier specified (ignoring)
[ 37.312] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[ 37.312] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 37.312] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 37.312] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5"
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 37.320] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 37.320] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 37.320] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 37.320] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37.320] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 37.320] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 37.320] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 37.320] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 37.321] (II) No input driver/identifier specified (ignoring)
[ 37.321] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 37.321] (II) No input driver/identifier specified (ignoring)
[ 37.321] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 37.321] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 37.321] (**) ThinkPad Extra Buttons: always reports core events
[ 37.321] (**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 37.325] (--) ThinkPad Extra Buttons: Found keys
[ 37.325] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 37.325] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 37.325] (**) Option "xkb_rules" "evdev"
[ 37.325] (**) Option "xkb_model" "evdev"
[ 37.325] (**) Option "xkb_layout" "us"
[ 59.626] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 59.626] (II) intel(0): Printing DDC gathered Modelines:
[ 59.626] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 59.626] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 59.752] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled
[ 10643.755] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 10649.023] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 10649.190] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 10649.190] (II) intel(0): Printing DDC gathered Modelines:
[ 10649.190] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (49.4 kHz)
[ 10649.190] (II) intel(0): Modeline "1280x800"x0.0 57.59 1280 1328 1360 1403 800 803 809 821 -hsync -vsync (41.0 kHz)
[ 10649.378] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.378] (EE) Unable to open evdev device "/dev/input/event5".
[ 10649.378] [dix] couldn't enable device 11
[ 10649.404] (II) config/udev: removing device TPPS/2 IBM TrackPoint
[ 10649.404] (II) TPPS/2 IBM TrackPoint: Close
[ 10649.404] (II) UnloadModule: "evdev"
[ 10649.406] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 10649.435] (II) UnloadModule: "synaptics"
[ 10649.443] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 10649.443] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10649.443] (II) Synaptics touchpad driver version 1.3.0
[ 10649.443] (**) Option "Device" "/dev/input/event4"
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10649.485] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 10649.485] (**) Option "TapButton1" "1"
[ 10649.485] (**) Option "TapButton2" "2"
[ 10649.485] (**) Option "TapButton3" "3"
[ 10649.522] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.522] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10649.535] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10649.535] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10649.561] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 10649.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10649.562] (II) No input driver/identifier specified (ignoring)
[ 10654.331] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 10654.331] (II) No input driver/identifier specified (ignoring)
[ 10654.331] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
[ 10654.331] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 10654.331] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 10654.331] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5"
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 10654.336] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 10654.336] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 10654.336] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 10654.336] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10654.336] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 10654.336] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 10654.336] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.

Next message: Russell King - ARM Linux: "Re: [PATCH] ARM: Fix SMP_ON_UP for non ARM ltd. implementations"
Previous message: Geert Uytterhoeven: "Re: [PATCH 2/2] s390: Fix possibly wrong size in strncmp (smsglucv)"
In reply to: Chris Wilson: "Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)"
Next in thread: Chris Wilson: "Re: More display errors in 2.6.38-rc2-00175-g6fb1b30 (was 2.6.38-rc2-00175-g6fb1b30)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]