Re: [PATCH 5/5] powerpc/5200: dts: refactor dts files

From: Grant Likely
Date: Mon Jan 03 2011 - 20:31:39 EST


On Wed, Nov 17, 2010 at 03:28:56PM -0800, John Bonesio wrote:
> This patch creates mpc5200b.dtsi containing the information for the MPC5200b
> SoC then modifies all of the dts files for MPC5200b based systems to use
> mpc5200b.dtsi.
>
> Signed-off-by: John Bonesio <bones@xxxxxxxxxxxx>

Applied, thanks. I may pull it out again before I ask Linus to pull
because this patch depends on a patch that I posted today to skip
registration of disabled devices, but for the time being it is in
next-devicetree.

g.

> ---
>
> arch/powerpc/boot/dts/cm5200.dts | 196 +++----------------------
> arch/powerpc/boot/dts/digsy_mtc.dts | 173 +++-------------------
> arch/powerpc/boot/dts/lite5200b.dts | 229 ++---------------------------
> arch/powerpc/boot/dts/media5200.dts | 212 +++------------------------
> arch/powerpc/boot/dts/motionpro.dts | 190 +++---------------------
> arch/powerpc/boot/dts/mpc5200b.dtsi | 276 +++++++++++++++++++++++++++++++++++
> arch/powerpc/boot/dts/mucmc52.dts | 176 ++++++----------------
> arch/powerpc/boot/dts/pcm030.dts | 193 ++----------------------
> arch/powerpc/boot/dts/pcm032.dts | 197 +------------------------
> arch/powerpc/boot/dts/uc101.dts | 162 ++++-----------------
> 10 files changed, 486 insertions(+), 1518 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi
>
> diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
> index 22f7233..c6d5d46 100644
> --- a/arch/powerpc/boot/dts/cm5200.dts
> +++ b/arch/powerpc/boot/dts/cm5200.dts
> @@ -10,226 +10,78 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "schindler,cm5200";
> compatible = "schindler,cm5200";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x04000000>; // 64MB
> - };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> - timer@620 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> - };
> -
> - timer@630 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> - };
> -
> - timer@640 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> - };
> -
> - timer@650 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> - };
> -
> - timer@660 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> - };
> -
> - timer@670 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> - };
> -
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> + can@900 {
> + status = "disabled";
> };
>
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + can@980 {
> + status = "disabled";
> };
>
> psc@2000 { // PSC1
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> };
>
> psc@2200 { // PSC2
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2200 0x100>;
> - interrupts = <2 2 0>;
> };
>
> psc@2400 { // PSC3
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2400 0x100>;
> - interrupts = <2 3 0>;
> };
>
> - psc@2c00 { // PSC6
> - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> + psc@2600 { // PSC4
> + status = "disabled";
> };
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> + psc@2800 { // PSC5
> + status = "disabled";
> };
>
> - mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> + psc@2c00 { // PSC6
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + };
>
> + mdio@3000 {
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> + ata@3a00 {
> + status = "disabled";
> };
>
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> + i2c@3d00 {
> + status = "disabled";
> };
> +
> };
>
> - localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> - #address-cells = <2>;
> - #size-cells = <1>;
> - ranges = <0 0 0xfc000000 0x2000000>;
> + pci@f0000d00 {
> + status = "disabled";
> + };
>
> + localbus {
> // 16-bit flash device at LocalPlus Bus CS0
> flash@0,0 {
> compatible = "cfi-flash";
> reg = <0 0 0x2000000>;
> bank-width = <2>;
> device-width = <2>;
> + #size-cells = <1>;
> + #address-cells = <1>;
> };
> };
> };
> diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
> index 3147b98..a12b587 100644
> --- a/arch/powerpc/boot/dts/digsy_mtc.dts
> +++ b/arch/powerpc/boot/dts/digsy_mtc.dts
> @@ -11,195 +11,64 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "intercontrol,digsy-mtc";
> compatible = "intercontrol,digsy-mtc";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
>
> memory {
> - device_type = "memory";
> reg = <0x00000000 0x02000000>; // 32MB
> };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> - timer@620 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> - };
> -
> - timer@630 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> - };
> -
> - timer@640 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> - };
> -
> - timer@650 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> + rtc@800 {
> + status = "disabled";
> };
>
> - timer@660 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> + can@900 {
> + status = "disabled";
> };
>
> - timer@670 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> + can@980 {
> + status = "disabled";
> };
>
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + psc@2000 { // PSC1
> + status = "disabled";
> };
>
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + psc@2200 { // PSC2
> + status = "disabled";
> };
>
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> - };
> -
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + psc@2400 { // PSC3
> + status = "disabled";
> };
>
> psc@2600 { // PSC4
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2600 0x100>;
> - interrupts = <2 11 0>;
> };
>
> psc@2800 { // PSC5
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2800 0x100>;
> - interrupts = <2 12 0>;
> };
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> + psc@2c00 { // PSC6
> + status = "disabled";
> };
>
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> - };
> -
> i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> -
> rtc@50 {
> compatible = "at,24c08";
> reg = <0x50>;
> @@ -211,16 +80,16 @@
> };
> };
>
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> + i2c@3d40 {
> + status = "disabled";
> };
> };
>
> + pci@f0000d00 {
> + status = "disabled";
> + };
> +
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> - #address-cells = <2>;
> - #size-cells = <1>;
> ranges = <0 0 0xff000000 0x1000000>;
>
> // 16-bit flash device at LocalPlus Bus CS0
> diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
> index c0a4e45..8d15dfd 100644
> --- a/arch/powerpc/boot/dts/lite5200b.dts
> +++ b/arch/powerpc/boot/dts/lite5200b.dts
> @@ -10,253 +10,71 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "fsl,lite5200b";
> compatible = "fsl,lite5200b";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
>
> memory {
> - device_type = "memory";
> reg = <0x00000000 0x10000000>; // 256MB
> };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> - timer@620 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> - };
> -
> - timer@630 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> - };
> -
> - timer@640 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> - };
> -
> - timer@650 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> - };
> -
> - timer@660 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> - };
> -
> - timer@670 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> - };
> -
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - can@900 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 17 0>;
> - reg = <0x900 0x80>;
> - };
> -
> - can@980 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 18 0>;
> - reg = <0x980 0x80>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + psc@2000 { // PSC1
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + cell-index = <0>;
> };
>
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> + psc@2200 { // PSC2
> + status = "disabled";
> };
>
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> + psc@2400 { // PSC3
> + status = "disabled";
> };
>
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> + psc@2600 { // PSC4
> + status = "disabled";
> };
>
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + psc@2800 { // PSC5
> + status = "disabled";
> };
>
> - psc@2000 { // PSC1
> - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> + psc@2c00 { // PSC6
> + status = "disabled";
> };
>
> // PSC2 in ac97 mode example
> //ac97@2200 { // PSC2
> // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
> // cell-index = <1>;
> - // reg = <0x2200 0x100>;
> - // interrupts = <2 2 0>;
> //};
>
> // PSC3 in CODEC mode example
> //i2s@2400 { // PSC3
> // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
> // cell-index = <2>;
> - // reg = <0x2400 0x100>;
> - // interrupts = <2 3 0>;
> - //};
> -
> - // PSC4 in uart mode example
> - //serial@2600 { // PSC4
> - // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - // reg = <0x2600 0x100>;
> - // interrupts = <2 11 0>;
> - //};
> -
> - // PSC5 in uart mode example
> - //serial@2800 { // PSC5
> - // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - // reg = <0x2800 0x100>;
> - // interrupts = <2 12 0>;
> //};
>
> // PSC6 in spi mode example
> //spi@2c00 { // PSC6
> // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
> // cell-index = <5>;
> - // reg = <0x2c00 0x100>;
> - // interrupts = <2 4 0>;
> //};
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> - };
> -
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> - };
> -
> - i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> - };
> -
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> -
> eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -270,12 +88,6 @@
> };
>
> pci@f0000d00 {
> - #interrupt-cells = <1>;
> - #size-cells = <2>;
> - #address-cells = <3>;
> - device_type = "pci";
> - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> - reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
> 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -295,19 +107,14 @@
> };
>
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> ranges = <0 0 0xfe000000 0x02000000>;
>
> flash@0,0 {
> compatible = "cfi-flash";
> - reg = <0 0 0x02000000>;
> - bank-width = <1>;
> - #size-cells = <1>;
> - #address-cells = <1>;
> + reg = <0 0 0x02000000>;
> + bank-width = <1>;
> + #size-cells = <1>;
> + #address-cells = <1>;
>
> partition@0 {
> label = "kernel";
> diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
> index 861f09f..84558f8 100644
> --- a/arch/powerpc/boot/dts/media5200.dts
> +++ b/arch/powerpc/boot/dts/media5200.dts
> @@ -11,14 +11,11 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "fsl,media5200";
> compatible = "fsl,media5200";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
>
> aliases {
> console = &console;
> @@ -30,16 +27,7 @@
> };
>
> cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
> bus-frequency = <132000000>; // 132 MHz
> clock-frequency = <396000000>; // 396 MHz
> @@ -47,203 +35,53 @@
> };
>
> memory {
> - device_type = "memory";
> reg = <0x00000000 0x08000000>; // 128MB RAM
> };
>
> - soc@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> + soc5200@f0000000 {
> bus-frequency = <132000000>;// 132 MHz
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
>
> timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> - timer@620 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> - };
> -
> - timer@630 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> - };
> -
> - timer@640 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> + psc@2000 { // PSC1
> + status = "disabled";
> };
>
> - timer@650 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> + psc@2200 { // PSC2
> + status = "disabled";
> };
>
> - timer@660 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> + psc@2400 { // PSC3
> + status = "disabled";
> };
>
> - timer@670 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> + psc@2600 { // PSC4
> + status = "disabled";
> };
>
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - can@900 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 17 0>;
> - reg = <0x900 0x80>;
> - };
> -
> - can@980 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 18 0>;
> - reg = <0x980 0x80>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0x100>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> - };
> -
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + psc@2800 { // PSC5
> + status = "disabled";
> };
>
> // PSC6 in uart mode
> console: psc@2c00 { // PSC6
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> - };
> -
> - eth0: ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> };
>
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> - };
> -
> - i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> - };
> -
> - i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> - };
> -
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> + usb@1000 {
> + reg = <0x1000 0x100>;
> };
> };
>
> pci@f0000d00 {
> - #interrupt-cells = <1>;
> - #size-cells = <2>;
> - #address-cells = <3>;
> - device_type = "pci";
> - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> - reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
> 0xc000 0 0 2 &media5200_fpga 0 3
> @@ -260,37 +98,29 @@
>
> 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
> >;
> - clock-frequency = <0>; // From boot loader
> - interrupts = <2 8 0 2 9 0 2 10 0>;
> - interrupt-parent = <&mpc5200_pic>;
> - bus-range = <0 0>;
> ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
> 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
> 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
> + interrupt-parent = <&mpc5200_pic>;
> };
>
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> ranges = < 0 0 0xfc000000 0x02000000
> 1 0 0xfe000000 0x02000000
> 2 0 0xf0010000 0x00010000
> 3 0 0xf0020000 0x00010000 >;
> -
> flash@0,0 {
> compatible = "amd,am29lv28ml", "cfi-flash";
> - reg = <0 0x0 0x2000000>; // 32 MB
> - bank-width = <4>; // Width in bytes of the flash bank
> - device-width = <2>; // Two devices on each bank
> + reg = <0 0x0 0x2000000>; // 32 MB
> + bank-width = <4>; // Width in bytes of the flash bank
> + device-width = <2>; // Two devices on each bank
> };
>
> flash@1,0 {
> compatible = "amd,am29lv28ml", "cfi-flash";
> - reg = <1 0 0x2000000>; // 32 MB
> - bank-width = <4>; // Width in bytes of the flash bank
> - device-width = <2>; // Two devices on each bank
> + reg = <1 0 0x2000000>; // 32 MB
> + bank-width = <4>; // Width in bytes of the flash bank
> + device-width = <2>; // Two devices on each bank
> };
>
> media5200_fpga: fpga@2,0 {
> diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
> index 97cb085..2276ccd 100644
> --- a/arch/powerpc/boot/dts/motionpro.dts
> +++ b/arch/powerpc/boot/dts/motionpro.dts
> @@ -10,219 +10,69 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "promess,motionpro";
> compatible = "promess,motionpro";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x04000000>; // 64MB
> - };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> - timer@620 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> - };
> -
> - timer@630 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> - };
> -
> - timer@640 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> - };
> -
> - timer@650 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> - };
> -
> timer@660 { // Motion-PRO status LED
> compatible = "promess,motionpro-led";
> label = "motionpro-statusled";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> blink-delay = <100>; // 100 msec
> };
>
> timer@670 { // Motion-PRO ready LED
> compatible = "promess,motionpro-led";
> label = "motionpro-readyled";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> };
>
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - can@980 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 18 0>;
> - reg = <0x980 0x80>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> - };
> -
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + can@900 {
> + status = "disabled";
> };
>
> psc@2000 { // PSC1
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> };
>
> // PSC2 in spi master mode
> psc@2200 { // PSC2
> compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
> cell-index = <1>;
> - reg = <0x2200 0x100>;
> - interrupts = <2 2 0>;
> };
>
> - // PSC5 in uart mode
> + psc@2400 { // PSC3
> + status = "disabled";
> + };
> +
> + psc@2600 { // PSC4
> + status = "disabled";
> + };
> +
> psc@2800 { // PSC5
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2800 0x100>;
> - interrupts = <2 12 0>;
> };
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> + psc@2c00 { // PSC6
> + status = "disabled";
> };
>
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@2 {
> reg = <2>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> + i2c@3d00 {
> + status = "disabled";
> };
>
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> -
> rtc@68 {
> compatible = "dallas,ds1339";
> reg = <0x68>;
> @@ -235,10 +85,11 @@
> };
> };
>
> + pci@f0000d00 {
> + status = "disabled";
> + };
> +
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> - #address-cells = <2>;
> - #size-cells = <1>;
> ranges = <0 0 0xff000000 0x01000000
> 1 0 0x50000000 0x00010000
> 2 0 0x50010000 0x00010000
> @@ -277,6 +128,9 @@
> reg = <0 0 0x01000000>;
> bank-width = <2>;
> device-width = <2>;
> + #size-cells = <1>;
> + #address-cells = <1>;
> };
> +
> };
> };
> diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
> new file mode 100644
> index 0000000..62cb4c9
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
> @@ -0,0 +1,276 @@
> +/*
> + * base MPC5200b Device Tree Source
> + *
> + * Copyright (C) 2010 SecretLab
> + * Grant Likely <grant@xxxxxxxxxxxx>
> + * John Bonesio <bones@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + model = "fsl,mpc5200b";
> + compatible = "fsl,mpc5200b";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&mpc5200_pic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + powerpc: PowerPC,5200@0 {
> + device_type = "cpu";
> + reg = <0>;
> + d-cache-line-size = <32>;
> + i-cache-line-size = <32>;
> + d-cache-size = <0x4000>; // L1, 16K
> + i-cache-size = <0x4000>; // L1, 16K
> + timebase-frequency = <0>; // from bootloader
> + bus-frequency = <0>; // from bootloader
> + clock-frequency = <0>; // from bootloader
> + };
> + };
> +
> + memory: memory {
> + device_type = "memory";
> + reg = <0x00000000 0x04000000>; // 64MB
> + };
> +
> + soc: soc5200@f0000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,mpc5200b-immr";
> + ranges = <0 0xf0000000 0x0000c000>;
> + reg = <0xf0000000 0x00000100>;
> + bus-frequency = <0>; // from bootloader
> + system-frequency = <0>; // from bootloader
> +
> + cdm@200 {
> + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> + reg = <0x200 0x38>;
> + };
> +
> + mpc5200_pic: interrupt-controller@500 {
> + // 5200 interrupts are encoded into two levels;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> + reg = <0x500 0x80>;
> + };
> +
> + timer@600 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x600 0x10>;
> + interrupts = <1 9 0>;
> + };
> +
> + timer@610 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x610 0x10>;
> + interrupts = <1 10 0>;
> + };
> +
> + timer@620 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x620 0x10>;
> + interrupts = <1 11 0>;
> + };
> +
> + timer@630 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x630 0x10>;
> + interrupts = <1 12 0>;
> + };
> +
> + timer@640 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x640 0x10>;
> + interrupts = <1 13 0>;
> + };
> +
> + timer@650 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x650 0x10>;
> + interrupts = <1 14 0>;
> + };
> +
> + timer@660 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x660 0x10>;
> + interrupts = <1 15 0>;
> + };
> +
> + timer@670 { // General Purpose Timer
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x670 0x10>;
> + interrupts = <1 16 0>;
> + };
> +
> + rtc@800 { // Real time clock
> + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> + reg = <0x800 0x100>;
> + interrupts = <1 5 0 1 6 0>;
> + };
> +
> + can@900 {
> + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> + interrupts = <2 17 0>;
> + reg = <0x900 0x80>;
> + };
> +
> + can@980 {
> + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> + interrupts = <2 18 0>;
> + reg = <0x980 0x80>;
> + };
> +
> + gpio_simple: gpio@b00 {
> + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> + reg = <0xb00 0x40>;
> + interrupts = <1 7 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpio_wkup: gpio@c00 {
> + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> + reg = <0xc00 0x40>;
> + interrupts = <1 8 0 0 3 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + spi@f00 {
> + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> + reg = <0xf00 0x20>;
> + interrupts = <2 13 0 2 14 0>;
> + };
> +
> + usb: usb@1000 {
> + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> + reg = <0x1000 0xff>;
> + interrupts = <2 6 0>;
> + };
> +
> + dma-controller@1200 {
> + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> + reg = <0x1200 0x80>;
> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> + 3 4 0 3 5 0 3 6 0 3 7 0
> + 3 8 0 3 9 0 3 10 0 3 11 0
> + 3 12 0 3 13 0 3 14 0 3 15 0>;
> + };
> +
> + xlb@1f00 {
> + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> + reg = <0x1f00 0x100>;
> + };
> +
> + psc1: psc@2000 { // PSC1
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2000 0x100>;
> + interrupts = <2 1 0>;
> + };
> +
> + psc2: psc@2200 { // PSC2
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2200 0x100>;
> + interrupts = <2 2 0>;
> + };
> +
> + psc3: psc@2400 { // PSC3
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2400 0x100>;
> + interrupts = <2 3 0>;
> + };
> +
> + psc4: psc@2600 { // PSC4
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2600 0x100>;
> + interrupts = <2 11 0>;
> + };
> +
> + psc5: psc@2800 { // PSC5
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2800 0x100>;
> + interrupts = <2 12 0>;
> + };
> +
> + psc6: psc@2c00 { // PSC6
> + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> + reg = <0x2c00 0x100>;
> + interrupts = <2 4 0>;
> + };
> +
> + eth0: ethernet@3000 {
> + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> + reg = <0x3000 0x400>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + interrupts = <2 5 0>;
> + phy-handle = <&phy0>;
> + };
> +
> + mdio@3000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> + };
> +
> + ata@3a00 {
> + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> + reg = <0x3a00 0x100>;
> + interrupts = <2 7 0>;
> + };
> +
> + i2c@3d00 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> + reg = <0x3d00 0x40>;
> + interrupts = <2 15 0>;
> + };
> +
> + i2c@3d40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> + reg = <0x3d40 0x40>;
> + interrupts = <2 16 0>;
> + };
> +
> + sram@8000 {
> + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> + reg = <0x8000 0x4000>;
> + };
> + };
> +
> + pci: pci@f0000d00 {
> + #interrupt-cells = <1>;
> + #size-cells = <2>;
> + #address-cells = <3>;
> + device_type = "pci";
> + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> + reg = <0xf0000d00 0x100>;
> + // interrupt-map-mask = need to add
> + // interrupt-map = need to add
> + clock-frequency = <0>; // From boot loader
> + interrupts = <2 8 0 2 9 0 2 10 0>;
> + bus-range = <0 0>;
> + // ranges = need to add
> + };
> +
> + localbus: localbus {
> + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0 0xfc000000 0x2000000>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
> index 8dc212d..b369db5 100644
> --- a/arch/powerpc/boot/dts/mucmc52.dts
> +++ b/arch/powerpc/boot/dts/mucmc52.dts
> @@ -11,172 +11,105 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "manroland,mucmc52";
> compatible = "manroland,mucmc52";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x04000000>; // 64MB
> - };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> gpt0: timer@600 { // GPT 0 in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt1: timer@610 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt2: timer@620 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt3: timer@630 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + timer@640 {
> + status = "disabled";
> };
>
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + timer@650 {
> + status = "disabled";
> };
>
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> + timer@660 {
> + status = "disabled";
> };
>
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + timer@670 {
> + status = "disabled";
> };
>
> - psc@2000 { /* PSC1 in UART mode */
> - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> + rtc@800 {
> + status = "disabled";
> + };
> +
> + can@900 {
> + status = "disabled";
> + };
> +
> + can@980 {
> + status = "disabled";
> + };
> +
> + spi@f00 {
> + status = "disabled";
> + };
> +
> + usb@1000 {
> + status = "disabled";
> };
>
> - psc@2200 { /* PSC2 in UART mode */
> + psc@2000 { // PSC1
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2200 0x100>;
> - interrupts = <2 2 0>;
> };
>
> - psc@2c00 { /* PSC6 in UART mode */
> + psc@2200 { // PSC2
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> };
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> + psc@2400 { // PSC3
> + status = "disabled";
> };
>
> - mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> + psc@2600 { // PSC4
> + status = "disabled";
> + };
> +
> + psc@2800 { // PSC5
> + status = "disabled";
> + };
>
> + psc@2c00 { // PSC6
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + };
> +
> + mdio@3000 {
> phy0: ethernet-phy@0 {
> compatible = "intel,lxt971";
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> + i2c@3d00 {
> + status = "disabled";
> };
>
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> hwmon@2c {
> compatible = "ad,adm9240";
> reg = <0x2c>;
> @@ -186,20 +119,9 @@
> reg = <0x51>;
> };
> };
> -
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> - };
> };
>
> pci@f0000d00 {
> - #interrupt-cells = <1>;
> - #size-cells = <2>;
> - #address-cells = <3>;
> - device_type = "pci";
> - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> - reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <
> /* IDSEL 0x10 */
> @@ -208,20 +130,12 @@
> 0x8000 0 0 3 &mpc5200_pic 0 2 3
> 0x8000 0 0 4 &mpc5200_pic 0 1 3
> >;
> - clock-frequency = <0>; // From boot loader
> - interrupts = <2 8 0 2 9 0 2 10 0>;
> - bus-range = <0 0>;
> ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
> 0x02000000 0 0x90000000 0x90000000 0 0x10000000
> 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
> };
>
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> ranges = <0 0 0xff800000 0x00800000
> 1 0 0x80000000 0x00800000
> 3 0 0x80000000 0x00800000>;
> diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
> index f3e30bb..b2ee689 100644
> --- a/arch/powerpc/boot/dts/pcm030.dts
> +++ b/arch/powerpc/boot/dts/pcm030.dts
> @@ -12,244 +12,88 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "phytec,pcm030";
> compatible = "phytec,pcm030";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x04000000>; // 64MB
> - };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> - timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> + timer@600 { // General Purpose Timer
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> gpt2: timer@620 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt3: timer@630 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt4: timer@640 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt5: timer@650 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt6: timer@660 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt7: timer@670 { // General Purpose Timer in GPIO mode
> compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - can@900 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 17 0>;
> - reg = <0x900 0x80>;
> - };
> -
> - can@980 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 18 0>;
> - reg = <0x980 0x80>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> - };
> -
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> - };
> -
> psc@2000 { /* PSC1 in ac97 mode */
> compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
> cell-index = <0>;
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> };
>
> /* PSC2 port is used by CAN1/2 */
> + psc@2200 {
> + status = "disabled";
> + };
>
> psc@2400 { /* PSC3 in UART mode */
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2400 0x100>;
> - interrupts = <2 3 0>;
> };
>
> /* PSC4 is ??? */
> -
> + psc@2600 {
> + status = "disabled";
> + };
> +
> /* PSC5 is ??? */
> + psc@2800 {
> + status = "disabled";
> + };
>
> psc@2c00 { /* PSC6 in UART mode */
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> - };
> -
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> };
>
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> - };
> -
> - i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> - };
> -
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> rtc@51 {
> compatible = "nxp,pcf8563";
> reg = <0x51>;
> @@ -267,12 +111,6 @@
> };
>
> pci@f0000d00 {
> - #interrupt-cells = <1>;
> - #size-cells = <2>;
> - #address-cells = <3>;
> - device_type = "pci";
> - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> - reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
> 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -283,11 +121,12 @@
> 0xc800 0 0 2 &mpc5200_pic 1 2 3
> 0xc800 0 0 3 &mpc5200_pic 1 3 3
> 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
> - clock-frequency = <0>; // From boot loader
> - interrupts = <2 8 0 2 9 0 2 10 0>;
> - bus-range = <0 0>;
> ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
> 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
> 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
> };
> +
> + localbus {
> + status = "disabled";
> + };
> };
> diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
> index e0f2702..184e194 100644
> --- a/arch/powerpc/boot/dts/pcm032.dts
> +++ b/arch/powerpc/boot/dts/pcm032.dts
> @@ -12,99 +12,37 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "phytec,pcm032";
> compatible = "phytec,pcm032";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
>
> memory {
> - device_type = "memory";
> reg = <0x00000000 0x08000000>; // 128MB
> };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> - timer@600 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> + timer@600 { // General Purpose Timer
> fsl,has-wdt;
> };
>
> - timer@610 { // General Purpose Timer
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> - };
> -
> gpt2: timer@620 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt3: timer@630 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x630 0x10>;
> - interrupts = <1 12 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt4: timer@640 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt5: timer@650 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
> @@ -118,138 +56,45 @@
> };
>
> gpt7: timer@670 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - rtc@800 { // Real time clock
> - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> - reg = <0x800 0x100>;
> - interrupts = <1 5 0 1 6 0>;
> - };
> -
> - can@900 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 17 0>;
> - reg = <0x900 0x80>;
> - };
> -
> - can@980 {
> - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> - interrupts = <2 18 0>;
> - reg = <0x980 0x80>;
> - };
> -
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> - spi@f00 {
> - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> - reg = <0xf00 0x20>;
> - interrupts = <2 13 0 2 14 0>;
> - };
> -
> - usb@1000 {
> - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> - reg = <0x1000 0xff>;
> - interrupts = <2 6 0>;
> - };
> -
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> - };
> -
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> - };
> -
> psc@2000 { /* PSC1 is ac97 */
> compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
> cell-index = <0>;
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> };
>
> /* PSC2 port is used by CAN1/2 */
> + psc@2200 {
> + status = "disabled";
> + };
>
> psc@2400 { /* PSC3 in UART mode */
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2400 0x100>;
> - interrupts = <2 3 0>;
> };
>
> /* PSC4 is ??? */
> + psc@2600 {
> + status = "disabled";
> + };
>
> /* PSC5 is ??? */
> + psc@2800 {
> + status = "disabled";
> + };
>
> psc@2c00 { /* PSC6 in UART mode */
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> - };
> -
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> };
>
> mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> -
> phy0: ethernet-phy@0 {
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> - };
> -
> - i2c@3d00 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d00 0x40>;
> - interrupts = <2 15 0>;
> - };
> -
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> rtc@51 {
> compatible = "nxp,pcf8563";
> reg = <0x51>;
> @@ -259,20 +104,9 @@
> reg = <0x52>;
> };
> };
> -
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> - };
> };
>
> pci@f0000d00 {
> - #interrupt-cells = <1>;
> - #size-cells = <2>;
> - #address-cells = <3>;
> - device_type = "pci";
> - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> - reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
> 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -283,20 +117,12 @@
> 0xc800 0 0 2 &mpc5200_pic 1 2 3
> 0xc800 0 0 3 &mpc5200_pic 1 3 3
> 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
> - clock-frequency = <0>; // From boot loader
> - interrupts = <2 8 0 2 9 0 2 10 0>;
> - bus-range = <0 0>;
> ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
> 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
> 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
> };
>
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> ranges = <0 0 0xfe000000 0x02000000
> 1 0 0xfc000000 0x02000000
> 2 0 0xfbe00000 0x00200000
> @@ -385,4 +211,3 @@
> */
> };
> };
> -
> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
> index e00441a..49be562 100644
> --- a/arch/powerpc/boot/dts/uc101.dts
> +++ b/arch/powerpc/boot/dts/uc101.dts
> @@ -11,79 +11,24 @@
> * option) any later version.
> */
>
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>
> / {
> model = "manroland,uc101";
> compatible = "manroland,uc101";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - interrupt-parent = <&mpc5200_pic>;
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - PowerPC,5200@0 {
> - device_type = "cpu";
> - reg = <0>;
> - d-cache-line-size = <32>;
> - i-cache-line-size = <32>;
> - d-cache-size = <0x4000>; // L1, 16K
> - i-cache-size = <0x4000>; // L1, 16K
> - timebase-frequency = <0>; // from bootloader
> - bus-frequency = <0>; // from bootloader
> - clock-frequency = <0>; // from bootloader
> - };
> - };
> -
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x04000000>; // 64MB
> - };
>
> soc5200@f0000000 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,mpc5200b-immr";
> - ranges = <0 0xf0000000 0x0000c000>;
> - reg = <0xf0000000 0x00000100>;
> - bus-frequency = <0>; // from bootloader
> - system-frequency = <0>; // from bootloader
> -
> - cdm@200 {
> - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> - reg = <0x200 0x38>;
> - };
> -
> - mpc5200_pic: interrupt-controller@500 {
> - // 5200 interrupts are encoded into two levels;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> - reg = <0x500 0x80>;
> - };
> -
> gpt0: timer@600 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x600 0x10>;
> - interrupts = <1 9 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt1: timer@610 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x610 0x10>;
> - interrupts = <1 10 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt2: timer@620 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x620 0x10>;
> - interrupts = <1 11 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
> @@ -97,118 +42,81 @@
> };
>
> gpt4: timer@640 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x640 0x10>;
> - interrupts = <1 13 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt5: timer@650 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x650 0x10>;
> - interrupts = <1 14 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt6: timer@660 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x660 0x10>;
> - interrupts = <1 15 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> gpt7: timer@670 { // General Purpose Timer in GPIO mode
> - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> - reg = <0x670 0x10>;
> - interrupts = <1 16 0>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> - gpio_simple: gpio@b00 {
> - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> - reg = <0xb00 0x40>;
> - interrupts = <1 7 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + rtc@800 {
> + status = "disabled";
> };
>
> - gpio_wkup: gpio@c00 {
> - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> - reg = <0xc00 0x40>;
> - interrupts = <1 8 0 0 3 0>;
> - gpio-controller;
> - #gpio-cells = <2>;
> + can@900 {
> + status = "disabled";
> };
>
> - dma-controller@1200 {
> - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> - reg = <0x1200 0x80>;
> - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> - 3 4 0 3 5 0 3 6 0 3 7 0
> - 3 8 0 3 9 0 3 10 0 3 11 0
> - 3 12 0 3 13 0 3 14 0 3 15 0>;
> + can@980 {
> + status = "disabled";
> };
>
> - xlb@1f00 {
> - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> - reg = <0x1f00 0x100>;
> + spi@f00 {
> + status = "disabled";
> };
>
> - psc@2000 { /* PSC1 in UART mode */
> - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2000 0x100>;
> - interrupts = <2 1 0>;
> + usb@1000 {
> + status = "disabled";
> };
>
> - psc@2200 { /* PSC2 in UART mode */
> + psc@2000 { // PSC1
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2200 0x100>;
> - interrupts = <2 2 0>;
> };
>
> - psc@2c00 { /* PSC6 in UART mode */
> + psc@2200 { // PSC2
> compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> - reg = <0x2c00 0x100>;
> - interrupts = <2 4 0>;
> };
>
> - ethernet@3000 {
> - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> - reg = <0x3000 0x400>;
> - local-mac-address = [ 00 00 00 00 00 00 ];
> - interrupts = <2 5 0>;
> - phy-handle = <&phy0>;
> + psc@2400 { // PSC3
> + status = "disabled";
> };
>
> - mdio@3000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
> - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
> + psc@2600 { // PSC4
> + status = "disabled";
> + };
> +
> + psc@2800 { // PSC5
> + status = "disabled";
> + };
>
> + psc@2c00 { // PSC6
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + };
> +
> + mdio@3000 {
> phy0: ethernet-phy@0 {
> compatible = "intel,lxt971";
> reg = <0>;
> };
> };
>
> - ata@3a00 {
> - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> - reg = <0x3a00 0x100>;
> - interrupts = <2 7 0>;
> + i2c@3d00 {
> + status = "disabled";
> };
>
> i2c@3d40 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> - reg = <0x3d40 0x40>;
> - interrupts = <2 16 0>;
> fsl,preserve-clocking;
> clock-frequency = <400000>;
>
> @@ -221,19 +129,13 @@
> reg = <0x51>;
> };
> };
> + };
>
> - sram@8000 {
> - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> - reg = <0x8000 0x4000>;
> - };
> + pci@f0000d00 {
> + status = "disabled";
> };
>
> localbus {
> - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> - #address-cells = <2>;
> - #size-cells = <1>;
> -
> ranges = <0 0 0xff800000 0x00800000
> 1 0 0x80000000 0x00800000
> 3 0 0x80000000 0x00800000>;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/