Re: intelfb refuses to load

[Bruno PrÃmont]

Hi,

Looks like you are using the wrong intel driver.

For intel modesetting you need
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

# CONFIG_FB_I810 is not set

That will give you inteldrmfb.
                        ^^^

Not sure what dependency is missing in your config that DRM_I915 does
not show up... (it might be CONFIG_AGP_INTEL)

intelfb (CONFIG_FB_I810) is obsolete and only supports a pretty limited
part of intel GPU features, modesetting only for VGA output (and not
sure it works at all with recent GPUs).

Bruno


On Sat, 11 December 2010 Pavel Machek <pavel@xxxxxx> wrote:
> Hi!
> 
> I'm trying to fix up my kernel setup so that X is happy... currently
> it fails to start with:
> 
> FATAL: Could not load /lib/modules/2.6.37-rc5+/modules.dep: No such
> file or directory
> (EE) intel(0): No kernel modesetting driver detected.
> (EE) Screen(s) found, but none have a usable configuration.
> 
> So far I have:
> 
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_STUB_POULSBO is not set
> CONFIG_VGASTATE=y
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> CONFIG_FB=y
> CONFIG_FB_I810=y
> # CONFIG_FB_I810_GTF is not set
> # CONFIG_FB_LE80578 is not set
> CONFIG_FB_INTEL=y
> CONFIG_FB_INTEL_DEBUG=y
> CONFIG_FB_INTEL_I2C=y
> # CONFIG_FB_MATROX is not set
> 
> And on the command line:
> 
> BOOT_IMAGE=(hd0,2)/l/linux-good/arch/i386/boot/bzImage root=/dev/sda4
> resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps
> psmouse.proto=imps vga=791 init=/tmp/swsusp-init
> acpi_sleep=s3_bios,s3_mode no_console_suspend i915.modeset=1
> video=intelfb:mode=1024x768 fbcon=scrollback:64k
> 
> ...but intelfb fails with:
> 
> [drm] Initialized drm 1.1.0 20060810
> intelfb: intelfb_init
> intelfb: Framebuffer driver for Intel(R)
> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM
> chipsets
> intelfb: Version 0.9.6
> intelfb: intelfb_setup
> intelfb: options: mode=1024x768
> intelfb: intelfb_pci_register
> intelfb 0000:00:02.0: power state changed by ACPI to D0
> intelfb 0000:00:02.0: power state changed by ACPI to D0
> intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> intelfb: fb aperture: 0xd0000000/0x10000000, MMIO region:
> 0xee100000/0x80000
> intelfb: Cannot reserve FB region.
> intelfb: cleanup
> 
> Any hints? If I'm doing some trivial mistake, perhaps "cannot reserve
> FB region" message could be improved?
> 									Pavel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/