Re: [PATCH 12/20] mfd/tc3589x: undo gpio module reset during chipinit

From: Samuel Ortiz
Date: Thu Dec 09 2010 - 10:50:33 EST


Hi Sundar,

On Fri, Dec 03, 2010 at 08:35:45PM +0530, Sundar Iyer wrote:
> Skip putting the GPIO module into a reset during the chip init. This makes
> sure to preserve any existing GPIO configurations done by pre-kernel boot code.
>

Acked-by: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>

Cheers,
Samuel.

> Signed-off-by: Sundar Iyer <sundar.iyer@xxxxxxxxxxxxxx>
> ---
> drivers/mfd/tc3589x.c | 9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
> index e173f33..fd206fd 100644
> --- a/drivers/mfd/tc3589x.c
> +++ b/drivers/mfd/tc3589x.c
> @@ -247,12 +247,15 @@ static int tc3589x_chip_init(struct tc3589x *tc3589x)
>
> dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
>
> - /* Put everything except the IRQ module into reset */
> + /*
> + * Put everything except the IRQ module into reset;
> + * also spare the GPIO module for any pin initialization
> + * done during pre-kernel boot
> + */
> ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL,
> TC3589x_RSTCTRL_TIMRST
> | TC3589x_RSTCTRL_ROTRST
> - | TC3589x_RSTCTRL_KBDRST
> - | TC3589x_RSTCTRL_GPIRST);
> + | TC3589x_RSTCTRL_KBDRST);
> if (ret < 0)
> return ret;
>
> --
> 1.7.2.dirty
>

--
Intel Open Source Technology Centre
http://oss.intel.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/