[PATCH -v4 1/3] Add CPER PCIe error section structure and constants definition

From: Huang Ying
Date: Mon Dec 06 2010 - 21:22:45 EST


On some machine, PCIe error is reported via APEI (ACPI Platform Error
Interface). The error data is passed from firmware to Linux via CPER
PCIe error section structure.

This patch adds CPER PCIe error section structure and constants
definition.

Signed-off-by: Huang Ying <ying.huang@xxxxxxxxx>
---
include/linux/cper.h | 86 ++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 82 insertions(+), 4 deletions(-)

--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -39,10 +39,12 @@
* Severity difinition for error_severity in struct cper_record_header
* and section_severity in struct cper_section_descriptor
*/
-#define CPER_SEV_RECOVERABLE 0x0
-#define CPER_SEV_FATAL 0x1
-#define CPER_SEV_CORRECTED 0x2
-#define CPER_SEV_INFORMATIONAL 0x3
+enum {
+ CPER_SEV_RECOVERABLE,
+ CPER_SEV_FATAL,
+ CPER_SEV_CORRECTED,
+ CPER_SEV_INFORMATIONAL,
+};

/*
* Validation bits difinition for validation_bits in struct
@@ -201,6 +203,47 @@
UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F, \
0xDF, 0xAA, 0x84, 0xEC)

+#define CPER_PROC_VALID_TYPE 0x0001
+#define CPER_PROC_VALID_ISA 0x0002
+#define CPER_PROC_VALID_ERROR_TYPE 0x0004
+#define CPER_PROC_VALID_OPERATION 0x0008
+#define CPER_PROC_VALID_FLAGS 0x0010
+#define CPER_PROC_VALID_LEVEL 0x0020
+#define CPER_PROC_VALID_VERSION 0x0040
+#define CPER_PROC_VALID_BRAND_INFO 0x0080
+#define CPER_PROC_VALID_ID 0x0100
+#define CPER_PROC_VALID_TARGET_ADDRESS 0x0200
+#define CPER_PROC_VALID_REQUESTOR_ID 0x0400
+#define CPER_PROC_VALID_RESPONDER_ID 0x0800
+#define CPER_PROC_VALID_IP 0x1000
+
+#define CPER_MEM_VALID_ERROR_STATUS 0x0001
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS 0x0002
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK 0x0004
+#define CPER_MEM_VALID_NODE 0x0008
+#define CPER_MEM_VALID_CARD 0x0010
+#define CPER_MEM_VALID_MODULE 0x0020
+#define CPER_MEM_VALID_BANK 0x0040
+#define CPER_MEM_VALID_DEVICE 0x0080
+#define CPER_MEM_VALID_ROW 0x0100
+#define CPER_MEM_VALID_COLUMN 0x0200
+#define CPER_MEM_VALID_BIT_POSITION 0x0400
+#define CPER_MEM_VALID_REQUESTOR_ID 0x0800
+#define CPER_MEM_VALID_RESPONDER_ID 0x1000
+#define CPER_MEM_VALID_TARGET_ID 0x2000
+#define CPER_MEM_VALID_ERROR_TYPE 0x4000
+
+#define CPER_PCIE_VALID_PORT_TYPE 0x0001
+#define CPER_PCIE_VALID_VERSION 0x0002
+#define CPER_PCIE_VALID_COMMAND_STATUS 0x0004
+#define CPER_PCIE_VALID_DEVICE_ID 0x0008
+#define CPER_PCIE_VALID_SERIAL_NUMBER 0x0010
+#define CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS 0x0020
+#define CPER_PCIE_VALID_CAPABILITY 0x0040
+#define CPER_PCIE_VALID_AER_INFO 0x0080
+
+#define CPER_PCIE_SLOT_SHIFT 3
+
/*
* All tables and structs must be byte-packed to match CPER
* specification, since the tables are provided by the system BIOS
@@ -306,6 +349,41 @@ struct cper_sec_mem_err {
__u8 error_type;
};

+struct cper_sec_pcie {
+ __u64 validation_bits;
+ __u32 port_type;
+ struct {
+ __u8 minor;
+ __u8 major;
+ __u8 reserved[2];
+ } version;
+ __u16 command;
+ __u16 status;
+ __u32 reserved;
+ struct {
+ __u16 vendor_id;
+ __u16 device_id;
+ __u8 class_code[3];
+ __u8 function;
+ __u8 device;
+ __u16 segment;
+ __u8 bus;
+ __u8 secondary_bus;
+ __u16 slot;
+ __u8 reserved;
+ } device_id;
+ struct {
+ __u32 lower;
+ __u32 upper;
+ } serial_number;
+ struct {
+ __u16 secondary_status;
+ __u16 control;
+ } bridge;
+ __u8 capability[60];
+ __u8 aer_info[96];
+};
+
/* Reset to default packing */
#pragma pack()

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/