[PATCH 10/20] input/tc3589x: add tc3589x keypad support
From: Sundar Iyer
Date: Fri Dec 03 2010 - 10:32:44 EST
Add support for the keypad controller module found on the
TC3589X devices. This driver default adds the support for
TC35893 device.
Signed-off-by: Sundar Iyer <sundar.iyer@xxxxxxxxxxxxxx>
---
drivers/input/keyboard/Kconfig | 10 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/tc3589x-keypad.c | 440 +++++++++++++++++++++++++++++++
drivers/mfd/tc3589x.c | 28 ++-
include/linux/mfd/tc3589x.h | 52 ++++
5 files changed, 530 insertions(+), 1 deletions(-)
create mode 100644 drivers/input/keyboard/tc3589x-keypad.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ee85e5b..0231ad3 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -452,6 +452,16 @@ config KEYBOARD_SPEAR
To compile this driver as a module, choose M here: the
module will be called spear-keboard.
+config KEYBOARD_TC3589X
+ tristate "TC3589X Keypad support"
+ depends on MFD_TC3589X
+ help
+ Say Y here if you want to use the keypad controller on
+ TC35892/3 I/O expander
+
+ To compile this driver as a module, choose M here: the
+ module will be called tc3589x-keypad
+
config KEYBOARD_TNETV107X
tristate "TI TNETV107X keypad support"
depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 8449c73..8ff1455 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 0000000..1bfd49a
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@xxxxxxxxxxxxxx>
+ * Author: Sundar Iyer <sundar.iyer@xxxxxxxxxxxxxx>
+ *
+ * License Terms: GNU General Public License, version 2
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW 8
+#define TC3589x_MAX_KPCOL 12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE 0xFF
+#define DEDICATED_KEY_VAL 0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK 0x0
+#define TC3589x_PULL_DOWN_MASK 0x1
+#define TC3589x_PULL_UP_MASK 0x2
+#define TC3589x_PULLUP_ALL_MASK 0xAA
+#define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2))
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG 0x01
+#define IOCFG_IG 0x08
+
+#define KP_EVCODE_COL_MASK 0x0F
+#define KP_EVCODE_ROW_MASK 0x70
+#define KP_RELEASE_EVT_MASK 0x80
+
+#define KP_ROW_SHIFT 4
+
+#define KP_NO_VALID_KEY_MASK 0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST 0x2
+#define TC3589x_IRQRST 0x10
+#define TC3589x_RESET_ALL 0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN 0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN 0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR 0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT 0x8
+#define TC3589x_EVT_INT 0x4
+#define TC3589x_KBD_LOSS_INT 0x2
+#define TC3589x_KBD_INT 0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR 0x2
+#define TC3589x_KBD_INT_CLR 0x1
+
+#define TC3589x_KBD_KEYMAP_SIZE 64
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @input: pointer to input device object
+ * @board: keypad platform device
+ * @krow: number of rows
+ * @kcol: number of coloumns
+ * @keymap: matrix scan code table for keycodes
+ */
+struct tc_keypad {
+ struct tc3589x *tc3589x;
+ struct input_dev *input;
+ const struct tc3589x_keypad_platform_data *board;
+ unsigned int krow;
+ unsigned int kcol;
+ unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+};
+
+static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+ int ret;
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ u8 settle_time = keypad->board->settle_time;
+ u8 dbounce_period = keypad->board->debounce_period;
+ u8 rows = keypad->board->krow & 0xf; /* mask out the nibble */
+ u8 column = keypad->board->kcol & 0xf; /* mask out the nibble */
+
+ /* validate platform configurations */
+ if ((keypad->board->kcol > TC3589x_MAX_KPCOL) ||
+ (keypad->board->krow > TC3589x_MAX_KPROW) ||
+ (keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE) ||
+ (keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE))
+ return -EINVAL;
+
+ /* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDSIZE, 0x0,
+ (rows << KP_ROW_SHIFT) | column);
+ if (ret < 0)
+ return ret;
+
+ /* configure dedicated key config, no dedicated key selected */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBCFG_LSB,
+ 0x0, DEDICATED_KEY_VAL);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBCFG_MSB,
+ 0x0, DEDICATED_KEY_VAL);
+ if (ret < 0)
+ return ret;
+
+ /* Configure settle time */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDSETTLE_REG,
+ 0x0, settle_time);
+ if (ret < 0)
+ return ret;
+
+ /* Configure debounce time */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDBOUNCE, 0x0, dbounce_period);
+ if (ret < 0)
+ return ret;
+
+ /* Start of initialise keypad GPIOs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+ if (ret < 0)
+ return ret;
+
+ /* Configure pull-up resistors for all row GPIOs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOPULLCFG0_LSB, 0x0,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOPULLCFG0_MSB, 0x0,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ /* Configure pull-up resistors for all column GPIOs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOPULLCFG1_LSB, 0x0,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOPULLCFG1_MSB, 0x0,
+ TC3589x_PULLUP_ALL_MASK);
+ if (ret < 0)
+ return ret;
+
+ ret = tc3589x_set_bits(tc3589x, TC3589x_IOPULLCFG2_LSB, 0x0,
+ TC3589x_PULLUP_ALL_MASK);
+
+ return ret;
+}
+
+#define TC35893_DATA_REGS 4
+#define TC35893_KEYCODE_FIFO_EMPTY 0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR 0xff
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+ struct tc_keypad *keypad = (struct tc_keypad *)dev;
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ u8 i, row_index, col_index, kbd_code, up;
+ u8 code;
+
+ for (i = 0; i < (TC35893_DATA_REGS * 2); i++) {
+ kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+ /* loop till fifo is empty and no more keys are pressed */
+ if ((kbd_code == TC35893_KEYCODE_FIFO_EMPTY) ||
+ (kbd_code == TC35893_KEYCODE_FIFO_CLEAR))
+ continue;
+
+ /* valid key is found */
+ col_index = kbd_code & KP_EVCODE_COL_MASK;
+ row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+ code = MATRIX_SCAN_CODE(row_index, col_index, 0x3);
+ up = kbd_code & KP_RELEASE_EVT_MASK;
+
+ input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+ input_report_key(keypad->input, keypad->keymap[code], !up);
+ input_sync(keypad->input);
+ }
+
+ /* clear IRQ */
+ tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+ 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+ /* enable IRQ */
+ tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+ 0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+ return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc3589x *tc3589x)
+{
+ int ret;
+
+ /* pull the keypad module out of reset */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* configure KBDMFS */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+ if (ret < 0)
+ return ret;
+
+ /* enable the keypad clock */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+ if (ret < 0)
+ return ret;
+
+ /* clear pending IRQs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* enable the IRQs */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+ TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+ return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc3589x *tc3589x)
+{
+ int ret;
+
+ /* clear IRQ */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+ 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+ if (ret < 0)
+ return ret;
+
+ /* disable all interrupts */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+ ~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* disable the keypad module */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+ if (ret < 0)
+ return ret;
+
+ /* put the keypad module into reset */
+ ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+ return ret;
+}
+
+static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
+{
+ struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+ struct tc_keypad *keypad;
+ struct input_dev *input;
+ const struct tc3589x_keypad_platform_data *plat;
+ int error, irq;
+
+ plat = tc3589x->pdata->keypad;
+ if (!plat) {
+ dev_err(&pdev->dev, "invalid keypad platform data\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!keypad || !input) {
+ dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->board = plat;
+ keypad->input = input;
+ keypad->tc3589x = tc3589x;
+
+ /* enable the keypad module */
+ error = tc3589x_keypad_enable(tc3589x);
+ if (error < 0) {
+ dev_err(&pdev->dev, "failed to enable keypad module\n");
+ goto err_free_mem;
+ }
+
+ error = tc3589x_keypad_init_key_hardware(keypad);
+ if (error < 0) {
+ dev_err(&pdev->dev, "failed to configure keypad module\n");
+ goto err_free_mem;
+ }
+
+ input->id.bustype = BUS_HOST;
+ input->name = pdev->name;
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = keypad->keymap;
+ input->keycodesize = sizeof(keypad->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ __set_bit(EV_KEY, input->evbit);
+ if (!plat->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ matrix_keypad_build_keymap(plat->keymap_data, 0x3,
+ input->keycode, input->keybit);
+
+ error = request_threaded_irq(irq, NULL,
+ tc3589x_keypad_irq, plat->irqtype,
+ "tc3589x-keypad", keypad);
+ if (error < 0) {
+ dev_err(&pdev->dev,
+ "Could not allocate irq %d,error %d\n",
+ irq, error);
+ goto err_free_mem;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev, "Could not register input device\n");
+ goto err_free_irq;
+ }
+
+ device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+ device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_irq:
+ free_irq(irq, keypad);
+err_free_mem:
+ input_free_device(input);
+ kfree(keypad);
+ return error;
+}
+
+static int __devexit tc3589x_keypad_remove(struct platform_device *pdev)
+{
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ int irq = platform_get_irq(pdev, 0);
+
+ free_irq(irq, keypad);
+
+ input_unregister_device(keypad->input);
+
+ tc3589x_keypad_disable(tc3589x);
+
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ int irq = platform_get_irq(pdev, 0);
+
+ /* disable the IRQ */
+ if (!device_may_wakeup(&pdev->dev))
+ tc3589x_keypad_disable(tc3589x);
+ else
+ enable_irq_wake(irq);
+
+ return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tc_keypad *keypad = platform_get_drvdata(pdev);
+ struct tc3589x *tc3589x = keypad->tc3589x;
+ int irq = platform_get_irq(pdev, 0);
+
+ /* enable the IRQ */
+ if (!device_may_wakeup(&pdev->dev))
+ tc3589x_keypad_enable(tc3589x);
+ else
+ disable_irq_wake(irq);
+
+ return 0;
+}
+
+static const struct dev_pm_ops tc3589x_keypad_dev_pm_ops = {
+ .suspend = tc3589x_keypad_suspend,
+ .resume = tc3589x_keypad_resume,
+};
+#endif
+
+static struct platform_driver tc3589x_keypad_driver = {
+ .driver.name = "tc3589x-keypad",
+ .driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .driver.pm = &tc3589x_keypad_dev_pm_ops,
+#endif
+ .probe = tc3589x_keypad_probe,
+ .remove = __devexit_p(tc3589x_keypad_remove),
+};
+
+static int __init tc3589x_keypad_init(void)
+{
+ return platform_driver_register(&tc3589x_keypad_driver);
+}
+
+static void __exit tc3589x_keypad_exit(void)
+{
+ return platform_driver_unregister(&tc3589x_keypad_driver);
+}
+
+module_init(tc3589x_keypad_init);
+module_exit(tc3589x_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 0ed9669..5672d56 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -129,6 +129,14 @@ static struct resource gpio_resources[] = {
},
};
+static struct resource keypad_resources[] = {
+ {
+ .start = TC3589x_INT_KBDIRQ,
+ .end = TC3589x_INT_KBDIRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct mfd_cell tc3589x_dev_gpio[] = {
{
.name = "tc3589x-gpio",
@@ -137,6 +145,14 @@ static struct mfd_cell tc3589x_dev_gpio[] = {
},
};
+static struct mfd_cell tc3589x_dev_keypad[] = {
+ {
+ .name = "tc3589x-keypad",
+ .num_resources = ARRAY_SIZE(keypad_resources),
+ .resources = &keypad_resources[0],
+ },
+};
+
static irqreturn_t tc3589x_irq(int irq, void *data)
{
struct tc3589x *tc3589x = data;
@@ -256,8 +272,18 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x)
dev_info(tc3589x->dev, "added gpio block\n");
}
- return ret;
+ if (blocks & TC3589x_BLOCK_KEYPAD) {
+ ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
+ ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+ tc3589x->irq_base);
+ if (ret) {
+ dev_err(tc3589x->dev, "failed to keypad child\n");
+ return ret;
+ }
+ dev_info(tc3589x->dev, "added keypad block\n");
+ }
+ return ret;
}
static int __devinit tc3589x_probe(struct i2c_client *i2c,
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
index da00958..8550e00 100644
--- a/include/linux/mfd/tc3589x.h
+++ b/include/linux/mfd/tc3589x.h
@@ -20,6 +20,17 @@ enum tx3589x_block {
#define TC3589x_RSTCTRL_KBDRST (1 << 1)
#define TC3589x_RSTCTRL_GPIRST (1 << 0)
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG 0x01
+#define TC3589x_KBDBOUNCE 0x02
+#define TC3589x_KBDSIZE 0x03
+#define TC3589x_KBCFG_LSB 0x04
+#define TC3589x_KBCFG_MSB 0x05
+#define TC3589x_KBDIC 0x08
+#define TC3589x_KBDMSK 0x09
+#define TC3589x_EVTCODE_FIFO 0x10
+#define TC3589x_KBDMFS 0x8F
+
#define TC3589x_IRQST 0x91
#define TC3589x_MANFCODE_MAGIC 0x03
@@ -35,6 +46,14 @@ enum tx3589x_block {
#define TC3589x_EXTRSTN 0x83
#define TC3589x_RSTINTCLR 0x84
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG 0xA7
+#define TC3589x_IOPULLCFG0_LSB 0xAA
+#define TC3589x_IOPULLCFG0_MSB 0xAB
+#define TC3589x_IOPULLCFG1_LSB 0xAC
+#define TC3589x_IOPULLCFG1_MSB 0xAD
+#define TC3589x_IOPULLCFG2_LSB 0xAE
+
#define TC3589x_GPIOIS0 0xC9
#define TC3589x_GPIOIS1 0xCA
#define TC3589x_GPIOIS2 0xCB
@@ -112,6 +131,37 @@ extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
const u8 *values);
extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS 0x8
+#define TC_KPD_COLUMNS 0x8
+#define TC_KPD_DEBOUNCE_PERIOD 0xA3
+#define TC_KPD_SETTLE_TIME 0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow: mask for available rows, value is 0xFF
+ * @kcol: mask for available columns, value is 0xFF
+ * @debounce_period: platform specific debounce time
+ * @settle_time: platform specific settle down time
+ * @irqtype: type of interrupt, falling or rising edge
+ * @enable_wakeup: specifies if keypad event can wake up system from sleep
+ * @no_autorepeat: flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+ struct matrix_keymap_data *keymap_data;
+ u8 krow;
+ u8 kcol;
+ u8 debounce_period;
+ u8 settle_time;
+ unsigned long irqtype;
+ bool enable_wakeup;
+ bool no_autorepeat;
+};
+
/**
* struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
* @gpio_base: first gpio number assigned to TC3589x. A maximum of
@@ -130,11 +180,13 @@ struct tc3589x_gpio_platform_data {
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
* @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
* @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
int irq_base;
struct tc3589x_gpio_platform_data *gpio;
+ struct tc3589x_keypad_platform_data *keypad;
};
#define TC3589x_NR_GPIOS 24
--
1.7.2.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/