[PATCH 3/4] implement hardware_reset callback for sdhci host

[Chuanxiao Dong]

hardware_reset callback will be used for host to trigger
RST_n signal. So a new callback reset_emmc was added to use
GPIO lines or something else to trigger reset signal.
This patch implement hardware_reset callback for sdhci host
controller.

reset_emmc: new callback. sdhci host controller can use GPIO
lines or something else to trigger reset signal by this callback.
Different sdhci host controller should implement this separately.
So this patch only add definition in head file for this callback.

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
---
 drivers/mmc/host/sdhci.c |   23 +++++++++++++++++++++++
 drivers/mmc/host/sdhci.h |   12 ++++++++++++
 2 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8a74fcb..d40b16c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1283,11 +1283,34 @@ out:
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
+/*
+ *  HW reset callback for eMMC4.4 card
+ *  In this function, HC will do the real HW reset
+ *  for eMMC4.4 card
+ *
+ *  RETURN VALUE:
+ *  0: reset emmc successfully
+ *  -ENODEV: no valid hardware to do so
+ */
+static int sdhci_hardware_reset(struct mmc_host *mmc)
+{
+	int err = 1;
+	struct sdhci_host *host;
+
+	host = mmc_priv(mmc);
+
+	if (host->ops && host->ops->reset_emmc)
+		err = host->ops->reset_emmc(host);
+
+	return err;
+}
+
 static const struct mmc_host_ops sdhci_ops = {
 	.request	= sdhci_request,
 	.set_ios	= sdhci_set_ios,
 	.get_ro		= sdhci_get_ro,
 	.enable_sdio_irq = sdhci_enable_sdio_irq,
+	.hardware_reset = sdhci_hardware_reset,
 };
 
 /*****************************************************************************\
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 1efe7dc..2a9b20c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -221,6 +221,18 @@ struct sdhci_ops {
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
+
+	/*
+	 * eMMC card reset callback.
+	 * This callback can be used by sdhci layer to support eMMC4.4
+	 * hardware reset feature. In this function, should trigger a
+	 * RST_n signal to reset eMMC card.
+	 *
+	 * return value:
+	 * 0: successfully reset eMMC card.
+	 * -ENODEV: no valid hardware to reset eMMC card.
+	 */
+	int		(*reset_emmc)(struct sdhci_host *host);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
-- 
1.6.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/