Re: ide boot failure 2.6.36/2.6.28 - 2.6.27 works
From: Andries E. Brouwer
Date: Sat Nov 20 2010 - 20:29:55 EST
Hi Alan,
> On a PCI box however you should always have a matching PCI driver,
True - in this case PIIX4, and selecting it makes things work
(but was not required earlier).
> If you have a PCI ATA driver which is not handled by any of the libata
> drivers and is not known by ata_generic then please let me know.
Also libata needs the additional selection of PIIX4,
but then works fine. (Of course all devices are renamed.)
Andries
> if its hitting a lot of people
Maybe a few hundred visible via Google.
One in every hundred thousand users?
---
Post by Thomas Ingerslev 2009-09-02
I have been struggling with error this fore quite a while,
and have finally found a solution.
... I ended up with just adding ide_generic.probe_mask=0x03 ...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/