Re: [PATCH 6/6] ce4100: Add support for CE4100 EHCI IP block to EHCIdriver

From: Dirk Brandewie
Date: Tue Nov 16 2010 - 18:25:01 EST


On 11/16/2010 01:46 PM, Greg KH wrote:
On Wed, Nov 10, 2010 at 01:51:17PM +0300, Sergei Shtylyov wrote:
Hello.

On 10-11-2010 5:36, Alan Stern wrote:

In a previous patch in this series GregKH asked that the PCI ID not be added
to pci_ids.h for ID's that are only used by a single file.
Here is an updated version of the EHCI controller patch.

Subject: [PATCH] ce4100: Add support for CE4100 EHCI IP block to EHCI driver

This patch adds support for the EHCI IP block present on the Intel
CE4100.

Signed-off-by: Dirk Brandewie<dirk.brandewie@xxxxxxxxx>
CC: linux-usb@xxxxxxxxxxxxxxx
CC: David Brownell<dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/usb/host/ehci-pci.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d27..da2b196 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -124,6 +124,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci_info(ehci, "disable lpm for langwell/penwell\n");
ehci->has_lpm = 0;
}
+ if (pdev->device == 0x2e70) {
+ hcd->has_tt = 1;
+ tdi_reset(ehci);
+ }

I think Greg meant that it's okay to use a symbolic constant for the
PCI ID (it helps tell people what hardware is being handled). Just
don't add that constant to the pci_ids.h file.

Or at least you need a comment naming the hardware that this ID belongs to.

I agree, something a bit better than just the device id might be nice
here.

Dirk, care to redo this one and your serial one, with that idea?

Yes, sorry for slow turn around been pulled in other random directions the last few days

--Dirk
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/