RE: [PATCH 4/4][v2] rapidio, powerpc/85xx: Error interrupt handler for sRIO.

[Bounine, Alexandre]

> From: Shaohui Xie [mailto:b21989@xxxxxxxxxxxxx]
> 
> The sRIO controller reports errors to the core with one signal, it
uses
> register EPWISR to provides the core quick access to where the error
occurred.
> The EPWISR indicates that there are 4 interrupts sources, port1,
port2, message
> unit and port write receive, but the sRIO driver does not support
port2
> for now, still the handler takes care of port2.
> Currently the handler only clear error status without any recovery.
>

Do these dual-RIO controllers have only one port-write interrupt?
(sorry, user manuals are not available for download from FSL).   
 
> @@ -1082,14 +1142,24 @@ fsl_rio_port_write_handler(int irq, void
*dev_instance)
>  	ipwsr = in_be32(&priv->msg_regs->pwsr);
> 
>  	epwisr = in_be32(priv->regs_win + RIO_EPWISR);
> -	if (epwisr & 0x80000000) {
> +	if (epwisr & EPWISR_ERR_PINT1) {
>  		tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
>  		pr_info("RIO_LTLEDCSR = 0x%x\n", tmp);
> -		out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
> +		port_error_handler(port, 0);
> +	}
> +
> +	if (epwisr & EPWISR_ERR_PINT2) {
> +		pr_info("RIO: port2 error\n");
> +		port_error_handler(port, 1);
> +	}
> +
> +	if (epwisr & EPWISR_ERR_MU) {
> +		pr_info("RIO: message unit error\n");
> +		msg_unit_error_handler(port);
>  	}
> 
> -	if (!(epwisr & 0x00000001))
> -		return IRQ_HANDLED;
> +	if (!(epwisr & EPWISR_ERR_PW))
> +		return IRQ_NONE;
> 
>  #ifdef DEBUG_PW
>  	pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);

This part is out of sync with mainline code tree (37-rc1). Probably it
should be updated to make it easier to apply your patch. Besides that,
works as expected on my RIO setup.

Regards,

Alex.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/