Re: [PATCH] mxcmmc: Add the ability to bind a regulator to managethe MMC card voltage

[Alberto Panizzo]

On mar, 2010-11-02 at 08:39 +0100, Sascha Hauer wrote:
> On Tue, Nov 02, 2010 at 01:05:37AM +0100, Alberto Panizzo wrote:
> > This implementation is based on the pxamci.c driver and it will
> > be used to support the mx31_3ds machine.
> > 
> > Signed-off-by: Alberto Panizzo <maramaopercheseimorto@xxxxxxxxx>
> 
> Looks good to me
> 
> Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> 

Sascha, must this one go to the Chris Ball mmc tree? or can you pick it
up directly?
Is there any chance to have it on one of .37-rcN?

(Adding Chris to cc.)

Thanks,
Alberto!

> > ---
> > 
> > This patch is based on the pengutronix for-rmk branch and apply to the
> > linus tre, version:2.6.37-rc1
> > 
> > ..cc the lists, sorry for the double mail.
> > 
> >  drivers/mmc/host/mxcmmc.c |   48 +++++++++++++++++++++++++++++++++++++++-----
> >  1 files changed, 42 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> > index 350f78e..e4637fc 100644
> > --- a/drivers/mmc/host/mxcmmc.c
> > +++ b/drivers/mmc/host/mxcmmc.c
> > @@ -31,6 +31,7 @@
> >  #include <linux/clk.h>
> >  #include <linux/io.h>
> >  #include <linux/gpio.h>
> > +#include <linux/regulator/consumer.h>
> >  
> >  #include <asm/dma.h>
> >  #include <asm/irq.h>
> > @@ -141,10 +142,45 @@ struct mxcmci_host {
> >  
> >  	struct work_struct	datawork;
> >  	spinlock_t		lock;
> > +
> > +	struct regulator	*vcc;
> >  };
> >  
> >  static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
> >  
> > +static inline void mxcmci_init_ocr(struct mxcmci_host *host)
> > +{
> > +#ifdef CONFIG_REGULATOR
> > +	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
> > +
> > +	if (IS_ERR(host->vcc)) {
> > +		host->vcc = NULL;
> > +	} else {
> > +		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
> > +		if (host->pdata && host->pdata->ocr_avail)
> > +			dev_warn(mmc_dev(host->mmc),
> > +				"pdata->ocr_avail will not be used\n");
> > +	}
> > +#endif
> > +	if (host->vcc == NULL) {
> > +		/* fall-back to platform data */
> > +		if (host->pdata && host->pdata->ocr_avail)
> > +			host->mmc->ocr_avail = host->pdata->ocr_avail;
> > +		else
> > +			host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> > +	}
> > +}
> > +
> > +static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
> > +{
> > +#ifdef CONFIG_REGULATOR
> > +	if (host->vcc)
> > +		mmc_regulator_set_ocr(host->vcc, vdd);
> > +#endif
> > +	if (host->pdata && host->pdata->setpower)
> > +		host->pdata->setpower(mmc_dev(host->mmc), vdd);
> > +}
> > +
> >  static inline int mxcmci_use_dma(struct mxcmci_host *host)
> >  {
> >  	return host->do_dma;
> > @@ -680,9 +716,9 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> >  		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
> >  
> >  	if (host->power_mode != ios->power_mode) {
> > -		if (host->pdata && host->pdata->setpower)
> > -			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
> > +		mxcmci_set_power(host, ios->vdd);
> >  		host->power_mode = ios->power_mode;
> > +
> >  		if (ios->power_mode == MMC_POWER_ON)
> >  			host->cmdat |= CMD_DAT_CONT_INIT;
> >  	}
> > @@ -808,10 +844,7 @@ static int mxcmci_probe(struct platform_device *pdev)
> >  	host->pdata = pdev->dev.platform_data;
> >  	spin_lock_init(&host->lock);
> >  
> > -	if (host->pdata && host->pdata->ocr_avail)
> > -		mmc->ocr_avail = host->pdata->ocr_avail;
> > -	else
> > -		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> > +	mxcmci_init_ocr(host);
> >  
> >  	if (host->pdata && host->pdata->dat3_card_detect)
> >  		host->default_irq_mask =
> > @@ -916,6 +949,9 @@ static int mxcmci_remove(struct platform_device *pdev)
> >  
> >  	mmc_remove_host(mmc);
> >  
> > +	if (host->vcc)
> > +		regulator_put(host->vcc);
> > +
> >  	if (host->pdata && host->pdata->exit)
> >  		host->pdata->exit(&pdev->dev, mmc);
> >  
> > -- 
> > 1.6.3.3
> > 
> > 
> > 
> > 
> > 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/