[PATCH] async_tx: make async_tx channel switching opt-in

From: Dan Williams
Date: Thu Oct 07 2010 - 20:08:20 EST


The majority of drivers in drivers/dma/ will never establish cross
channel operation chains and do not need the extra overhead in struct
dma_async_tx_descriptor. Make channel switching opt-in by default.

Cc: Anatolij Gustschin <agust@xxxxxxx>
Cc: Ira Snyder <iws@xxxxxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
Cc: Saeed Bishara <saeed@xxxxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
drivers/dma/Kconfig | 7 +++++--
drivers/dma/dmaengine.c | 4 ++--
include/linux/dmaengine.h | 8 ++++----
3 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ab28f60..79d1542 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -46,7 +46,7 @@ config INTEL_MID_DMAC

If unsure, say N.

-config ASYNC_TX_DISABLE_CHANNEL_SWITCH
+config ASYNC_TX_ENABLE_CHANNEL_SWITCH
bool

config AMBA_PL08X
@@ -62,7 +62,6 @@ config INTEL_IOATDMA
depends on PCI && X86
select DMA_ENGINE
select DCA
- select ASYNC_TX_DISABLE_CHANNEL_SWITCH
select ASYNC_TX_DISABLE_PQ_VAL_DMA
select ASYNC_TX_DISABLE_XOR_VAL_DMA
help
@@ -77,6 +76,7 @@ config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
select DMA_ENGINE
+ select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the Intel(R) IOP Series RAID engines.

@@ -101,6 +101,7 @@ config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
select DMA_ENGINE
+ select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Freescale Elo and Elo Plus DMA controllers.
The Elo is the DMA controller on some 82xx and 83xx parts, and the
@@ -117,6 +118,7 @@ config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
select DMA_ENGINE
+ select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Marvell XOR engine.

@@ -174,6 +176,7 @@ config AMCC_PPC440SPE_ADMA
depends on 440SPe || 440SP
select DMA_ENGINE
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+ select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the AMCC PPC440SPe RAID engines.

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 235153c..8bcb15f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -706,7 +706,7 @@ int dma_async_device_register(struct dma_device *device)
BUG_ON(!device->dev);

/* note: this only matters in the
- * CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y case
+ * CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=n case
*/
if (device_has_all_tx_types(device))
dma_cap_set(DMA_ASYNC_TX, device->cap_mask);
@@ -980,7 +980,7 @@ void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
struct dma_chan *chan)
{
tx->chan = chan;
- #ifndef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ #ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
spin_lock_init(&tx->lock);
#endif
}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 3934ebd..9d8688b 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -321,14 +321,14 @@ struct dma_async_tx_descriptor {
dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
dma_async_tx_callback callback;
void *callback_param;
-#ifndef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
struct dma_async_tx_descriptor *next;
struct dma_async_tx_descriptor *parent;
spinlock_t lock;
#endif
};

-#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
static inline void txd_lock(struct dma_async_tx_descriptor *txd)
{
}
@@ -656,11 +656,11 @@ static inline void net_dmaengine_put(void)
#ifdef CONFIG_ASYNC_TX_DMA
#define async_dmaengine_get() dmaengine_get()
#define async_dmaengine_put() dmaengine_put()
-#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
#else
#define async_dma_find_channel(type) dma_find_channel(type)
-#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */
+#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */
#else
static inline void async_dmaengine_get(void)
{

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/