[PATCH 20/28] Staging: comedi: drivers: adl_pci9118.c: Edit file so that checkpatch.pl has 0 errors and warnings

From: Tracey Dent
Date: Tue Oct 05 2010 - 21:02:53 EST


Changed a few lines that made checkpatch.pl complain. All warnings were
WARNING: please, no space for starting a line, ERROR: trailing whitespace,
WARNING: line over 80 characters, WARNING: unnecessary whitespace before a quoted newline,
and WARNING: please, no space before tabs.

Signed-off-by: Tracey Dent <tdent48227@xxxxxxxxx>
---
drivers/staging/comedi/drivers/adl_pci9118.c | 118 +++++++++++++-------------
1 files changed, 60 insertions(+), 58 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index b0e39cb..cdd2461 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -13,53 +13,55 @@ Driver: adl_pci9118
Description: Adlink PCI-9118DG, PCI-9118HG, PCI-9118HR
Author: Michal Dobes <dobes@xxxxxxxxx>
Devices: [ADLink] PCI-9118DG (pci9118dg), PCI-9118HG (pci9118hg),
- PCI-9118HR (pci9118hr)
+ PCI-9118HR (pci9118hr)
Status: works

This driver supports AI, AO, DI and DO subdevices.
AI subdevice supports cmd and insn interface,
other subdevices support only insn interface.
For AI:
-- If cmd->scan_begin_src=TRIG_EXT then trigger input is TGIN (pin 46).
-- If cmd->convert_src=TRIG_EXT then trigger input is EXTTRG (pin 44).
-- If cmd->start_src/stop_src=TRIG_EXT then trigger input is TGIN (pin 46).
-- It is not neccessary to have cmd.scan_end_arg=cmd.chanlist_len but
- cmd.scan_end_arg modulo cmd.chanlist_len must by 0.
-- If return value of cmdtest is 5 then you've bad channel list
- (it isn't possible mixture S.E. and DIFF inputs or bipolar and unipolar
- ranges).
+- If cmd->scan_begin_src=TRIG_EXT then trigger input is TGIN (pin 46).
+- If cmd->convert_src=TRIG_EXT then trigger input is EXTTRG (pin 44).
+- If cmd->start_src/stop_src=TRIG_EXT then trigger input is TGIN (pin 46).
+- It is not neccessary to have cmd.scan_end_arg=cmd.chanlist_len but
+ cmd.scan_end_arg modulo cmd.chanlist_len must by 0.
+- If return value of cmdtest is 5 then you've bad channel list
+ (it isn't possible mixture S.E. and DIFF inputs or bipolar and unipolar
+ ranges).

There are some hardware limitations:
-a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
- ended inputs.
-b) DMA transfers must have the length aligned to two samples (32 bit),
- so there is some problems if cmd->chanlist_len is odd. This driver tries
- bypass this with adding one sample to the end of the every scan and discard
- it on output but this cann't be used if cmd->scan_begin_src=TRIG_FOLLOW
- and is used flag TRIG_WAKE_EOS, then driver switch to interrupt driven mode
- with interrupt after every sample.
-c) If isn't used DMA then you can use only mode where
- cmd->scan_begin_src=TRIG_FOLLOW.
+a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
+ ended inputs.
+b DMA transfers must have the length aligned to two samples (32 bit),
+ so there is some problems if cmd->chanlist_len is odd. This driver
+ tries bypass this with adding one sample to the end of the every
+ scan and discard it on output but this cann't be used if
+ cmd->scan_begin_src=TRIG_FOLLOW and is used flag TRIG_WAKE_EOS, then
+ driver switch to interrupt driven mode with interrupt after every
+ sample.
+c) If isn't used DMA then you can use only mode where
+ cmd->scan_begin_src=TRIG_FOLLOW.

Configuration options:
- [0] - PCI bus of device (optional)
- [1] - PCI slot of device (optional)
- If bus/slot is not specified, then first available PCI
- card will be used.
- [2] - 0= standard 8 DIFF/16 SE channels configuration
- n = external multiplexer connected, 1 <= n <= 256
- [3] - 0=autoselect DMA or EOC interrupts operation
- 1 = disable DMA mode
- 3 = disable DMA and INT, only insn interface will work
- [4] - sample&hold signal - card can generate signal for external S&H board
- 0 = use SSHO(pin 45) signal is generated in onboard hardware S&H logic
- 0 != use ADCHN7(pin 23) signal is generated from driver, number say how
- long delay is requested in ns and sign polarity of the hold
- (in this case external multiplexor can serve only 128 channels)
- [5] - 0=stop measure on all hardware errors
- 2 | = ignore ADOR - A/D Overrun status
- 8|=ignore Bover - A/D Burst Mode Overrun status
- 256|=ignore nFull - A/D FIFO Full status
+ [0] - PCI bus of device (optional)
+ [1] - PCI slot of device (optional)
+ If bus/slot is not specified, then first available PCI
+ card will be used.
+ [2] - 0= standard 8 DIFF/16 SE channels configuration
+ n = external multiplexer connected, 1 <= n <= 256
+ [3] - 0=autoselect DMA or EOC interrupts operation
+ 1 = disable DMA mode
+ 3 = disable DMA and INT, only insn interface will work
+ [4] - sample&hold signal - card can generate signal for external
+ S&H board 0 = use SSHO(pin 45) signal is generated in onboard
+ hardware S&H logic 0 != use ADCHN7(pin 23) signal is generated
+ from driver, number say how long delay is requested in ns and
+ sign polarity of the hold (in this case external multiplexor
+ can serve only 128 channels)
+ [5] - 0=stop measure on all hardware errors
+ 2 | = ignore ADOR - A/D Overrun status
+ 8|=ignore Bover - A/D Burst Mode Overrun status
+ 256|=ignore nFull - A/D FIFO Full status

*/
#include "../comedidev.h"
@@ -93,7 +95,7 @@ Configuration options:
#define DPRINTK(fmt, args...)
#endif

-#define IORANGE_9118 64 /* I hope */
+#define IORANGE_9118 64 /* I hope */
#define PCI9118_CHANLEN 255 /*
* len of chanlist, some source say 256,
* but reality looks like 255 :-(
@@ -1235,7 +1237,7 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
* align to 32bit down
*/
}
- DPRINTK("2 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
+ DPRINTK("2 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

/* we want wake up every scan? */
if (devpriv->ai_flags & TRIG_WAKE_EOS) {
@@ -1295,7 +1297,7 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
}
}

- DPRINTK("3 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
+ DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
/* transfer without TRIG_WAKE_EOS */
if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
/* if it's possible then allign DMA buffers to length of scan */
@@ -1323,13 +1325,13 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
((devpriv->ai_n_realscanlen << 1) *
devpriv->ai_scans)) {
DPRINTK
- ("3.0 ai_n_realscanlen=%d ai_scans=%d \n",
+ ("3.0 ai_n_realscanlen=%d ai_scans=%d\n",
devpriv->ai_n_realscanlen,
devpriv->ai_scans);
dmalen0 =
(devpriv->ai_n_realscanlen << 1) *
devpriv->ai_scans;
- DPRINTK("3.1 dmalen0=%d dmalen1=%d \n", dmalen0,
+ DPRINTK("3.1 dmalen0=%d dmalen1=%d\n", dmalen0,
dmalen1);
dmalen0 &= ~3L;
} else { /*
@@ -1342,21 +1344,21 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
dmalen1 =
(devpriv->ai_n_realscanlen << 1) *
devpriv->ai_scans - dmalen0;
- DPRINTK("3.2 dmalen0=%d dmalen1=%d \n", dmalen0,
+ DPRINTK("3.2 dmalen0=%d dmalen1=%d\n", dmalen0,
dmalen1);
dmalen1 &= ~3L;
}
}
}

- DPRINTK("4 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
+ DPRINTK("4 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

/* these DMA buffer size will be used */
devpriv->dma_actbuf = 0;
devpriv->dmabuf_use_size[0] = dmalen0;
devpriv->dmabuf_use_size[1] = dmalen1;

- DPRINTK("5 dmalen0=%d dmalen1=%d \n", dmalen0, dmalen1);
+ DPRINTK("5 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
#if 0
if (devpriv->ai_n_scanlen < this_board->half_fifo_size) {
devpriv->dmabuf_panic_size[0] =
@@ -1576,12 +1578,12 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
}

/* use sample&hold signal? */
- if (cmd->convert_src == TRIG_NOW) {
+ if (cmd->convert_src == TRIG_NOW)
devpriv->usessh = 1;
- } /* yes */
- else {
+ /* yes */
+ else
devpriv->usessh = 0;
- } /* no */
+ /* no */

DPRINTK("1 neverending=%d scans=%u usessh=%d ai_startstop=0x%2x\n",
devpriv->ai_neverending, devpriv->ai_scans, devpriv->usessh,
@@ -1598,9 +1600,9 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->usedma = 1;
if ((cmd->flags & TRIG_WAKE_EOS) &&
(devpriv->ai_n_scanlen == 1)) {
- if (cmd->convert_src == TRIG_NOW) {
+ if (cmd->convert_src == TRIG_NOW)
devpriv->ai_add_back = 1;
- }
+
if (cmd->convert_src == TRIG_TIMER) {
devpriv->usedma = 0;
/*
@@ -1695,11 +1697,11 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
(cmd->scan_begin_src == TRIG_INT)) &&
(cmd->convert_src == TRIG_TIMER)) {
/* both timer is used for one time */
- if (cmd->scan_begin_src == TRIG_EXT) {
+ if (cmd->scan_begin_src == TRIG_EXT)
devpriv->ai_do = 4;
- } else {
+ else
devpriv->ai_do = 1;
- }
+
pci9118_calc_divisors(devpriv->ai_do, dev, s,
&cmd->scan_begin_arg, &cmd->convert_arg,
devpriv->ai_flags,
@@ -1961,7 +1963,7 @@ static int setup_channel_list(struct comedi_device *dev,

/*
==============================================================================
- calculate 8254 divisors if they are used for dual timing
+ calculate 8254 divisors if they are used for dual timing
*/
static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -2213,11 +2215,11 @@ static int pci9118_attach(struct comedi_device *dev,

opt_bus = it->options[0];
opt_slot = it->options[1];
- if (it->options[3] & 1) {
+ if (it->options[3] & 1)
master = 0; /* user don't want use bus master */
- } else {
+ else
master = 1;
- }
+

ret = alloc_private(dev, sizeof(struct pci9118_private));
if (ret < 0) {
--
1.7.3.1.50.g1e633

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/