[PATCH 1/7] w35und: Kill dead HAL macros in wbhal_f.h

From: Pekka Enberg
Date: Sun Sep 19 2010 - 05:29:32 EST


Fixes an uninitialized variable access in _rx_iq_calibration_loop_winbond():

CC [M] drivers/staging/winbond/phy_calibration.o
drivers/staging/winbond/phy_calibration.c: In function â_rx_iq_calibration_loop_winbondâ:
drivers/staging/winbond/phy_calibration.c:1138: warning: âvalâ is used uninitialized in this function

Cc: Lars Lindley <lindley@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Ruslan Pisarev <ruslan@xxxxxxxxxxxxxxx>
Signed-off-by: Pekka Enberg <penberg@xxxxxxxxxx>
---
drivers/staging/winbond/phy_calibration.c | 20 --------------------
drivers/staging/winbond/wbhal_f.h | 10 ----------
2 files changed, 0 insertions(+), 30 deletions(-)

diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 5c1f053..2b375ba 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -1132,18 +1132,6 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration_loop()\n"));
PHY_DEBUG(("[CAL] ** factor = %d\n", factor));

-
-/* RF Control Override */
- hw_get_cxx_reg(phw_data, 0x80, &val);
- val |= BIT(19);
- hw_set_cxx_reg(phw_data, 0x80, val);
-
-/* RF_Ctrl */
- hw_get_cxx_reg(phw_data, 0xE4, &val);
- val |= BIT(0);
- hw_set_cxx_reg(phw_data, 0xE4, val);
- PHY_DEBUG(("[CAL] ** RF_CTRL(0xE4) = 0x%08X", val));
-
hw_set_dxx_reg(phw_data, 0x58, 0x44444444); /* IQ_Alpha */

/* b. */
@@ -1461,13 +1449,8 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)

PHY_DEBUG(("[CAL] -> phy_calibration_winbond()\n"));

- /* 20040701 1.1.25.1000 kevin */
- hw_get_cxx_reg(phw_data, 0x80, &mac_ctrl);
- hw_get_cxx_reg(phw_data, 0xE4, &rf_ctrl);
hw_get_dxx_reg(phw_data, 0x58, &iq_alpha);

-
-
_rxadc_dc_offset_cancellation_winbond(phw_data, frequency);
/* _txidac_dc_offset_cancellation_winbond(phw_data); */
/* _txqdac_dc_offset_cacellation_winbond(phw_data); */
@@ -1482,11 +1465,8 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));

/* i. Set RFIC to "Normal mode" */
- hw_set_cxx_reg(phw_data, 0x80, mac_ctrl);
- hw_set_cxx_reg(phw_data, 0xE4, rf_ctrl);
hw_set_dxx_reg(phw_data, 0x58, iq_alpha);

-
/*********************************************************************/
phy_init_rf(phw_data);

diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
index 401c024..fc78c14 100644
--- a/drivers/staging/winbond/wbhal_f.h
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -78,14 +78,4 @@ u32 hal_get_bss_pk_cnt(struct hw_data *hw_data);
#define hal_get_time_count(_P) (_P->time_count / 10)
#define hal_detect_error(_P) (_P->WbUsb.DetectCount)

-/* The follow function is unused for IS89C35 */
-#define hal_disable_interrupt(_A)
-#define hal_enable_interrupt(_A)
-#define hal_get_interrupt_type(_A)
-#define hal_get_clear_interrupt(_A)
#define hal_ibss_disconnect(_A) (hal_stop_sync_bss(_A))
-#define hal_join_request_stop(_A)
-#define hw_get_cxx_reg(_A, _B, _C)
-#define hw_set_cxx_reg(_A, _B, _C)
-
-
--
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/