Re: System time drifts when processor idle.
From: jean-philippe francois
Date: Thu Sep 02 2010 - 07:45:26 EST
2010/8/28 Venkatesh Pallipadi <venki@xxxxxxxxxx>:
>
> OK. So, the problem seems to be limited to HPET and 5 min multiples.
>
>> john stultz <johnstul@xxxxxxxxxx>:
>> Huh. So you're thinking the timer tick scheduler is pushing way past the
>> HPET wrap length, and then we're missing an accumulation point and
>> things wrap under us?
>
> John: I don't think it is that we are going tickless beyond HPET wrap
> length. HPET max delta should be preventing that.
> We probably need to read out HPET hardware counter to see whether
> things are OK there. Even if we miss the interrupt, time update should
> notice that. One potential problem may be that HPET hardware can only
> do 32 bit mode, but advertising 64 bit mode and we are getting
> confused when we update time?
>
> jean-philippe: What does hpet section of "cat /proc/timer_list" look
> like?
Tick Device: mode: 1
Broadcast device
Clock Event Device: hpet
max_delta_ns: 2147483647
min_delta_ns: 7500
mult: 61496114
shift: 32
mode: 3
next_event: 11289189000000 nsecs
set_next_event: hpet_legacy_next_event
set_mode: hpet_legacy_set_mode
event_handler: tick_handle_oneshot_broadcast
tick_broadcast_mask: 00000003
tick_broadcast_oneshot_mask: 00000002
> Also, can you boot with "hpet=verbose" option and send the
> dmesg.
>
Please find attached, and quoted below with the hpet section only :
[ 0.000000] Kernel command line:
root=UUID=d6f01bdd-8503-4992-bc4e-a511f74318fb ro quiet splash
hpet=verbose
[ 0.000000] hpet: hpet_enable(895):
[ 0.000000] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.000000] hpet: CFG: 0x0, STATUS: 0x0
[ 0.000000] hpet: COUNTER_l: 0x0, COUNTER_h: 0x0
[ 0.000000] hpet: T0: CFG_l: 0x30, CFG_h: 0xf00000
[ 0.000000] hpet: T0: CMP_l: 0xffffffff, CMP_h: 0xffffffff
[ 0.000000] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.000000] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.000000] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: hpet_set_mode(348):
[ 0.000000] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.000000] hpet: CFG: 0x3, STATUS: 0x0
[ 0.000000] hpet: COUNTER_l: 0x577, COUNTER_h: 0x0
[ 0.000000] hpet: T0: CFG_l: 0x13c, CFG_h: 0xf00000
[ 0.000000] hpet: T0: CMP_l: 0xe4c0, CMP_h: 0x0
[ 0.000000] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.000000] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.000000] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet clockevent registered
[ 0.320995] hpet: hpet_msi_capability_lookup(621):
[ 0.320995] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.320995] hpet: CFG: 0x3, STATUS: 0x0
[ 0.320995] hpet: COUNTER_l: 0x63fff5, COUNTER_h: 0x0
[ 0.320995] hpet: T0: CFG_l: 0x138, CFG_h: 0xf00000
[ 0.320995] hpet: T0: CMP_l: 0x6484b0, CMP_h: 0x0
[ 0.320995] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.320995] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.320995] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.320995] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.320995] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.320995] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.322438] hpet: hpet_late_init(951):
[ 0.322441] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.322444] hpet: CFG: 0x3, STATUS: 0x0
[ 0.322447] hpet: COUNTER_l: 0x647301, COUNTER_h: 0x0
[ 0.322450] hpet: T0: CFG_l: 0x138, CFG_h: 0xf00000
[ 0.322454] hpet: T0: CMP_l: 0x6484b0, CMP_h: 0x0
[ 0.322457] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.322460] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.322463] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.322466] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.322470] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.322473] hpet: T2: CMP_l: 0xc8ad01, CMP_h: 0x0
[ 0.322476] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610087] hpet: hpet_set_mode(348):
[ 0.610090] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.610093] hpet: CFG: 0x3, STATUS: 0x0
[ 0.610097] hpet: COUNTER_l: 0xa30ae4, COUNTER_h: 0x0
[ 0.610100] hpet: T0: CFG_l: 0x13c, CFG_h: 0xf00000
[ 0.610104] hpet: T0: CMP_l: 0xa3ea17, CMP_h: 0x0
[ 0.610107] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610110] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.610114] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.610117] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610120] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.610124] hpet: T2: CMP_l: 0xc8ad01, CMP_h: 0x0
[ 0.610127] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610154] Switching to clocksource hpet
[ 1.034733] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> Thanks,
> Venki
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-020636rc1-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #201008171306 SMP Tue Aug 17 14:16:28 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b400 (usable)
[ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d6000 - 00000000000d8000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] modified: 00000000bfed0000 - 00000000bfedc000 (ACPI NVS)
[ 0.000000] modified: 00000000bfedc000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f8030] f8030
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 7f76a000 - 7fff0000
[ 0.000000] Allocated new RAMDISK: 009d1000 - 01256eff
[ 0.000000] Move RAMDISK from 000000007f76a000 - 000000007ffefefe to 009d1000 - 01256efe
[ 0.000000] ACPI: RSDP 000f8000 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT bfed24d6 0007C (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bfed8c6c 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT bfed3ae1 05117 (v02 ECS F44 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS bfedbfc0 00040
[ 0.000000] ACPI: HPET bfed8d60 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG bfed8d98 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR bfed8dd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC bfed8dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT bfed8e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC bfed8e8a 00176 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT bfed3804 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT bfed2b0e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT bfed2a68 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT bfed2552 00516 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfed0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] On node 0 totalpages: 786012
[ 0.000000] free_area_init_node: node 0, pgdat c081c580, node_mem_map c1258020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3948 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4366 pages used for memmap
[ 0.000000] HighMem zone: 554436 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000
[ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s32832 r0 d24512 u2097152
[ 0.000000] pcpu-alloc: s32832 r0 d24512 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779870
[ 0.000000] Kernel command line: root=UUID=d6f01bdd-8503-4992-bc4e-a511f74318fb ro quiet splash hpet=verbose
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15722540 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (54 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009cc864] TEXT DATA BSS
[ 0.000000] #3 [00009cd000 - 00009d0140] BRK
[ 0.000000] #4 [00000f8040 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f8030 - 00000f8040] MP-table mpf
[ 0.000000] #6 [000009b400 - 000009b971] BIOS reserved
[ 0.000000] #7 [000009bb65 - 00000f8030] BIOS reserved
[ 0.000000] #8 [000009b971 - 000009bb65] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009d1000 - 0001257000] NEW RAMDISK
[ 0.000000] #13 [0001257000 - 0001258000] BOOTMEM
[ 0.000000] #14 [0001258000 - 0002a58000] BOOTMEM
[ 0.000000] #15 [0002a58000 - 0002a58004] BOOTMEM
[ 0.000000] #16 [0002a58040 - 0002a58100] BOOTMEM
[ 0.000000] #17 [0002a58100 - 0002a58154] BOOTMEM
[ 0.000000] #18 [0002a58180 - 0002a5b180] BOOTMEM
[ 0.000000] #19 [0002a5b180 - 0002a5b250] BOOTMEM
[ 0.000000] #20 [0002a5b280 - 0002a67280] BOOTMEM
[ 0.000000] #21 [0002a67280 - 0002a672a5] BOOTMEM
[ 0.000000] #22 [0002a672c0 - 0002a672e7] BOOTMEM
[ 0.000000] #23 [0002a67300 - 0002a674dc] BOOTMEM
[ 0.000000] #24 [0002a67500 - 0002a67540] BOOTMEM
[ 0.000000] #25 [0002a67540 - 0002a67580] BOOTMEM
[ 0.000000] #26 [0002a67580 - 0002a675c0] BOOTMEM
[ 0.000000] #27 [0002a675c0 - 0002a67600] BOOTMEM
[ 0.000000] #28 [0002a67600 - 0002a67640] BOOTMEM
[ 0.000000] #29 [0002a67640 - 0002a67680] BOOTMEM
[ 0.000000] #30 [0002a67680 - 0002a676c0] BOOTMEM
[ 0.000000] #31 [0002a676c0 - 0002a67700] BOOTMEM
[ 0.000000] #32 [0002a67700 - 0002a67740] BOOTMEM
[ 0.000000] #33 [0002a67740 - 0002a67780] BOOTMEM
[ 0.000000] #34 [0002a67780 - 0002a677c0] BOOTMEM
[ 0.000000] #35 [0002a677c0 - 0002a67800] BOOTMEM
[ 0.000000] #36 [0002a67800 - 0002a67840] BOOTMEM
[ 0.000000] #37 [0002a67840 - 0002a67880] BOOTMEM
[ 0.000000] #38 [0002a67880 - 0002a67890] BOOTMEM
[ 0.000000] #39 [0002a678c0 - 0002a678d0] BOOTMEM
[ 0.000000] #40 [0002a67900 - 0002a6794c] BOOTMEM
[ 0.000000] #41 [0002a67980 - 0002a679cc] BOOTMEM
[ 0.000000] #42 [0002c00000 - 0002c0e000] BOOTMEM
[ 0.000000] #43 [0002e00000 - 0002e0e000] BOOTMEM
[ 0.000000] #44 [0002a69a00 - 0002a69a04] BOOTMEM
[ 0.000000] #45 [0002a69a40 - 0002a69a44] BOOTMEM
[ 0.000000] #46 [0002a69a80 - 0002a69a88] BOOTMEM
[ 0.000000] #47 [0002a69ac0 - 0002a69ac8] BOOTMEM
[ 0.000000] #48 [0002a69b00 - 0002a69ba8] BOOTMEM
[ 0.000000] #49 [0002a69bc0 - 0002a69c28] BOOTMEM
[ 0.000000] #50 [0002a69c40 - 0002a6dc40] BOOTMEM
[ 0.000000] #51 [0002a6dc40 - 0002aedc40] BOOTMEM
[ 0.000000] #52 [0002aedc40 - 0002b2dc40] BOOTMEM
[ 0.000000] #53 [0002e0e000 - 0003d0c82c] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfed0)
[ 0.000000] Memory: 3085364k/3144512k available (4980k kernel code, 58684k reserved, 2400k data, 732k init, 2235208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0836000 - 0xc08ed000 ( 732 kB)
[ 0.000000] .data : 0xc05dd1af - 0xc0835568 (2400 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05dd1af (4980 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet: hpet_enable(895):
[ 0.000000] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.000000] hpet: CFG: 0x0, STATUS: 0x0
[ 0.000000] hpet: COUNTER_l: 0x0, COUNTER_h: 0x0
[ 0.000000] hpet: T0: CFG_l: 0x30, CFG_h: 0xf00000
[ 0.000000] hpet: T0: CMP_l: 0xffffffff, CMP_h: 0xffffffff
[ 0.000000] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.000000] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.000000] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: hpet_set_mode(348):
[ 0.000000] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.000000] hpet: CFG: 0x3, STATUS: 0x0
[ 0.000000] hpet: COUNTER_l: 0x577, COUNTER_h: 0x0
[ 0.000000] hpet: T0: CFG_l: 0x13c, CFG_h: 0xf00000
[ 0.000000] hpet: T0: CMP_l: 0xe4c0, CMP_h: 0x0
[ 0.000000] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.000000] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.000000] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.000000] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2493.418 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4986.83 BogoMIPS (lpj=9973672)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004026] Security Framework initialized
[ 0.004044] AppArmor: AppArmor initialized
[ 0.004084] Mount-cache hash table entries: 512
[ 0.004202] Initializing cgroup subsys ns
[ 0.004206] Initializing cgroup subsys cpuacct
[ 0.004210] Initializing cgroup subsys memory
[ 0.004219] Initializing cgroup subsys devices
[ 0.004220] Initializing cgroup subsys freezer
[ 0.004222] Initializing cgroup subsys net_cls
[ 0.004252] CPU: Physical Processor ID: 0
[ 0.004253] CPU: Processor Core ID: 0
[ 0.004256] mce: CPU supports 6 MCE banks
[ 0.004264] CPU0: Thermal monitoring enabled (TM2)
[ 0.004267] using mwait in idle threads.
[ 0.004274] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.004284] ... version: 2
[ 0.004285] ... bit width: 40
[ 0.004286] ... generic registers: 2
[ 0.004288] ... value mask: 000000ffffffffff
[ 0.004289] ... max period: 000000007fffffff
[ 0.004290] ... fixed-purpose events: 3
[ 0.004292] ... event mask: 0000000700000003
[ 0.007259] ACPI: Core revision 20100702
[ 0.015645] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.015651] ftrace: allocating 25958 entries in 51 pages
[ 0.020037] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020382] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061582] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.064000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.152016] Brought up 2 CPUs
[ 0.152018] Total of 2 processors activated (9974.27 BogoMIPS).
[ 0.153032] devtmpfs: initialized
[ 0.153032] regulator: core version 0.5
[ 0.153032] Time: 16:38:09 Date: 09/01/10
[ 0.153032] NET: Registered protocol family 16
[ 0.153032] EISA bus registered
[ 0.153032] ACPI: bus type pci registered
[ 0.153068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153072] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.153073] PCI: Using MMCONFIG for extended config space
[ 0.153075] PCI: Using configuration type 1 for base access
[ 0.153818] bio: create slab <bio-0> at 0
[ 0.156443] ACPI: EC: Look up EC in DSDT
[ 0.158751] ACPI: BIOS _OSI(Linux) query ignored
[ 0.159823] ACPI: SSDT bfed33fe 0033E (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.160105] ACPI: Dynamic OEM Table Load:
[ 0.160108] ACPI: SSDT (null) 0033E (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.160401] ACPI: SSDT bfed2d6d 0060C (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.160655] ACPI: Dynamic OEM Table Load:
[ 0.160658] ACPI: SSDT (null) 0060C (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.161010] ACPI: SSDT bfed373c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.161273] ACPI: Dynamic OEM Table Load:
[ 0.161276] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.161407] ACPI: SSDT bfed3379 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.161661] ACPI: Dynamic OEM Table Load:
[ 0.161664] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.240031] ACPI: Interpreter enabled
[ 0.240035] ACPI: (supports S0 S3 S4 S5)
[ 0.240054] ACPI: Using IOAPIC for interrupt routing
[ 0.284859] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.285140] ACPI: No dock devices found.
[ 0.285144] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.285712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.286827] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.286830] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.286832] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.286835] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.286838] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.286841] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.286843] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.286926] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.286929] pci 0000:00:01.0: PME# disabled
[ 0.287038] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.287132] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.287210] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.287304] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.287309] pci 0000:00:1a.7: PME# disabled
[ 0.287358] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.287443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.287448] pci 0000:00:1b.0: PME# disabled
[ 0.287561] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.287566] pci 0000:00:1c.0: PME# disabled
[ 0.287682] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.287686] pci 0000:00:1c.1: PME# disabled
[ 0.287803] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.287808] pci 0000:00:1c.2: PME# disabled
[ 0.287924] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.287928] pci 0000:00:1c.3: PME# disabled
[ 0.288053] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.288058] pci 0000:00:1c.4: PME# disabled
[ 0.288172] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.288176] pci 0000:00:1c.5: PME# disabled
[ 0.288263] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.288358] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.288453] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.288531] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.288625] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.288631] pci 0000:00:1d.7: PME# disabled
[ 0.288842] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.288846] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.288851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007)
[ 0.288855] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0260 (mask 0003)
[ 0.288913] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.288925] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.288938] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.288950] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.288963] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.289040] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.289052] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.289065] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.289077] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.289089] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.289101] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.289148] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.289153] pci 0000:00:1f.2: PME# disabled
[ 0.289188] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.289231] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.289331] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.289349] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff 64bit]
[ 0.289360] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
[ 0.289382] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.289412] pci 0000:01:00.0: supports D1 D2
[ 0.289462] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff 64bit]
[ 0.289543] pci 0000:01:00.1: supports D1 D2
[ 0.289592] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.289595] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.289599] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.289603] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.289665] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.289670] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.289675] pci 0000:00:1c.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.289683] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.289791] pci 0000:04:00.0: reg 10: [mem 0xf0300000-0xf03003ff]
[ 0.289823] pci 0000:04:00.0: reg 18: [io 0x3000-0x307f]
[ 0.289885] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.296017] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.296022] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.296027] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.296035] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.296169] pci 0000:05:00.0: reg 10: [mem 0xf0200000-0xf0201fff 64bit]
[ 0.296333] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.296340] pci 0000:05:00.0: PME# disabled
[ 0.304022] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.304028] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.304032] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.304040] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.304154] pci 0000:06:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.304196] pci 0000:06:00.0: reg 18: [mem 0xf0500000-0xf0500fff 64bit]
[ 0.304243] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.304304] pci 0000:06:00.0: supports D1 D2
[ 0.304306] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.304312] pci 0000:06:00.0: PME# disabled
[ 0.304341] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.304354] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.304359] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.304363] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.304371] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.304490] pci 0000:07:00.0: reg 10: [mem 0xf0402000-0xf040207f 64bit]
[ 0.304517] pci 0000:07:00.0: reg 18: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.304534] pci 0000:07:00.0: reg 20: [io 0x5000-0x507f]
[ 0.304614] pci 0000:07:00.0: supports D1 D2
[ 0.312017] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.312022] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 0.312027] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.312034] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.312234] pci 0000:08:00.0: reg 24: [mem 0xf0600000-0xf0601fff]
[ 0.312290] pci 0000:08:00.0: PME# supported from D3hot
[ 0.312296] pci 0000:08:00.0: PME# disabled
[ 0.312361] pci 0000:08:00.1: reg 10: [io 0x6020-0x6027]
[ 0.312378] pci 0000:08:00.1: reg 14: [io 0x6014-0x6017]
[ 0.312396] pci 0000:08:00.1: reg 18: [io 0x6018-0x601f]
[ 0.312413] pci 0000:08:00.1: reg 1c: [io 0x6010-0x6013]
[ 0.312431] pci 0000:08:00.1: reg 20: [io 0x6000-0x600f]
[ 0.312522] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.312539] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.312544] pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
[ 0.312549] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.312557] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.312628] pci 0000:09:04.0: reg 10: [mem 0xf0701000-0xf0701fff]
[ 0.312641] pci 0000:09:04.0: reg 14: [mem 0xf0700000-0xf07007ff]
[ 0.312718] pci 0000:09:04.0: supports D1 D2
[ 0.312720] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312725] pci 0000:09:04.0: PME# disabled
[ 0.312790] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.312795] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.312799] pci 0000:00:1e.0: bridge window [mem 0xf0700000-0xf07fffff]
[ 0.312807] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.312809] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.312812] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.312814] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.312817] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.312819] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.312821] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.312824] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.312871] pci_bus 0000:00: on NUMA node 0
[ 0.312874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.313097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.313162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.313222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.313283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.313344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.313404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.313465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.313549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.313594] Unable to assume PCIe control: Disabling ASPM
[ 0.320310] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.320374] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.320437] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.320499] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.320562] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.320625] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.320687] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.320750] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.320778] HEST: Table is not found!
[ 0.320847] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.320853] vgaarb: loaded
[ 0.320988] SCSI subsystem initialized
[ 0.320995] libata version 3.00 loaded.
[ 0.320995] usbcore: registered new interface driver usbfs
[ 0.320995] usbcore: registered new interface driver hub
[ 0.320995] usbcore: registered new device driver usb
[ 0.320995] ACPI: WMI: Mapper loaded
[ 0.320995] PCI: Using ACPI for IRQ routing
[ 0.320995] PCI: pci_cache_line_size set to 64 bytes
[ 0.320995] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.320995] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 0.320995] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.320995] NetLabel: Initializing
[ 0.320995] NetLabel: domain hash size = 128
[ 0.320995] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.320995] NetLabel: unlabeled traffic allowed by default
[ 0.320995] hpet: hpet_msi_capability_lookup(621):
[ 0.320995] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.320995] hpet: CFG: 0x3, STATUS: 0x0
[ 0.320995] hpet: COUNTER_l: 0x63fff5, COUNTER_h: 0x0
[ 0.320995] hpet: T0: CFG_l: 0x138, CFG_h: 0xf00000
[ 0.320995] hpet: T0: CMP_l: 0x6484b0, CMP_h: 0x0
[ 0.320995] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.320995] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.320995] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.320995] hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.320995] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.320995] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.320995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.320995] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.322438] hpet: hpet_late_init(951):
[ 0.322441] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.322444] hpet: CFG: 0x3, STATUS: 0x0
[ 0.322447] hpet: COUNTER_l: 0x647301, COUNTER_h: 0x0
[ 0.322450] hpet: T0: CFG_l: 0x138, CFG_h: 0xf00000
[ 0.322454] hpet: T0: CMP_l: 0x6484b0, CMP_h: 0x0
[ 0.322457] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.322460] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.322463] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.322466] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.322470] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.322473] hpet: T2: CMP_l: 0xc8ad01, CMP_h: 0x0
[ 0.322476] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.324020] Switching to clocksource tsc
[ 0.330612] AppArmor: AppArmor Filesystem Enabled
[ 0.330619] pnp: PnP ACPI init
[ 0.330628] ACPI: bus type pnp registered
[ 0.349362] pnp 00:07: disabling [io 0xfe00] because it overlaps 0000:00:1c.0 BAR 13 [io 0xf000-0xffff]
[ 0.349667] pnp: PnP ACPI: found 11 devices
[ 0.349669] ACPI: ACPI bus type pnp unregistered
[ 0.349672] PnPBIOS: Disabled by ACPI PNP
[ 0.349680] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.349683] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.349685] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.349688] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.349690] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.349693] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.349695] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.349698] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.349704] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.349710] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.349712] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.349715] system 00:07: [io 0x1000-0x107f] has been reserved
[ 0.349717] system 00:07: [io 0x1180-0x11bf] has been reserved
[ 0.349720] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.385608] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.385612] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff pref]
[ 0.385615] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.385618] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0600000-0xc07fffff pref]
[ 0.385622] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.385625] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
[ 0.385628] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.385631] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0c00000-0xc0c000ff]
[ 0.385637] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0c00000-0xc0c000ff] (PCI address [0xc0c00000-0xc0c000ff]
[ 0.385640] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.385643] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.385646] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.385650] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.385653] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.385658] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.385661] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.385668] pci 0000:00:1c.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.385672] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.385681] pci 0000:04:00.0: BAR 6: assigned [mem 0xc0200000-0xc020ffff pref]
[ 0.385683] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.385686] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.385693] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.385697] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff pref]
[ 0.385705] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.385708] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.385715] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.385720] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.385728] pci 0000:06:00.0: BAR 6: assigned [mem 0xc0600000-0xc061ffff pref]
[ 0.385730] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.385733] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.385740] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.385745] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc07fffff pref]
[ 0.385752] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.385756] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 0.385762] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.385767] pci 0000:00:1c.4: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.385775] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.385778] pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
[ 0.385784] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.385789] pci 0000:00:1c.5: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
[ 0.385797] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 0.385799] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.385805] pci 0000:00:1e.0: bridge window [mem 0xf0700000-0xf07fffff]
[ 0.385809] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.385824] alloc irq_desc for 16 on node -1
[ 0.385826] alloc kstat_irqs on node -1
[ 0.385831] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385835] pci 0000:00:01.0: setting latency timer to 64
[ 0.385844] alloc irq_desc for 17 on node -1
[ 0.385845] alloc kstat_irqs on node -1
[ 0.385849] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.385854] pci 0000:00:1c.0: setting latency timer to 64
[ 0.385864] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.385869] pci 0000:00:1c.1: setting latency timer to 64
[ 0.385879] alloc irq_desc for 18 on node -1
[ 0.385880] alloc kstat_irqs on node -1
[ 0.385884] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.385889] pci 0000:00:1c.2: setting latency timer to 64
[ 0.385898] alloc irq_desc for 19 on node -1
[ 0.385900] alloc kstat_irqs on node -1
[ 0.385903] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.385908] pci 0000:00:1c.3: setting latency timer to 64
[ 0.385919] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.385924] pci 0000:00:1c.4: setting latency timer to 64
[ 0.385933] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.385938] pci 0000:00:1c.5: setting latency timer to 64
[ 0.385946] pci 0000:00:1e.0: setting latency timer to 64
[ 0.385950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.385952] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.385955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.385957] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
[ 0.385959] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff]
[ 0.385962] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff]
[ 0.385964] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.385966] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.385968] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.385971] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.385973] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.385976] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.385978] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.385980] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.385983] pci_bus 0000:04: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.385985] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff pref]
[ 0.385987] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.385990] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.385992] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.385994] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.385997] pci_bus 0000:06: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.385999] pci_bus 0000:06: resource 2 [mem 0xc0600000-0xc07fffff pref]
[ 0.386001] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.386003] pci_bus 0000:07: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.386006] pci_bus 0000:07: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.386008] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
[ 0.386010] pci_bus 0000:08: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.386013] pci_bus 0000:08: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
[ 0.386015] pci_bus 0000:09: resource 1 [mem 0xf0700000-0xf07fffff]
[ 0.386018] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.386020] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.386022] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.386024] pci_bus 0000:09: resource 7 [mem 0x000d8000-0x000dbfff]
[ 0.386027] pci_bus 0000:09: resource 8 [mem 0x000dc000-0x000dffff]
[ 0.386029] pci_bus 0000:09: resource 9 [mem 0xc0000000-0xdfffffff]
[ 0.386031] pci_bus 0000:09: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.386058] NET: Registered protocol family 2
[ 0.386106] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.386302] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.386614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.386773] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.386775] TCP reno registered
[ 0.386777] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.386784] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.386841] NET: Registered protocol family 1
[ 0.387004] pci 0000:01:00.0: Boot video device
[ 0.387031] PCI: CLS 64 bytes, default 64
[ 0.387067] Trying to unpack rootfs image as initramfs...
[ 0.587671] Freeing initrd memory: 8728k freed
[ 0.592011] Simple Boot Flag at 0x36 set to 0x1
[ 0.592200] cpufreq-nforce2: No nForce2 chipset.
[ 0.592228] Scanning for low memory corruption every 60 seconds
[ 0.592384] audit: initializing netlink socket (disabled)
[ 0.592398] type=2000 audit(1283359089.588:1): initialized
[ 0.601120] highmem bounce pool size: 64 pages
[ 0.601126] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.602428] VFS: Disk quotas dquot_6.5.2
[ 0.602482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.602996] fuse init (API version 7.15)
[ 0.603076] msgmni has been set to 1677
[ 0.605480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.605483] io scheduler noop registered
[ 0.605485] io scheduler deadline registered
[ 0.605496] io scheduler cfq registered (default)
[ 0.605629] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.605655] alloc irq_desc for 40 on node -1
[ 0.605658] alloc kstat_irqs on node -1
[ 0.605666] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.605736] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.605781] alloc irq_desc for 41 on node -1
[ 0.605783] alloc kstat_irqs on node -1
[ 0.605791] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.605891] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.605936] alloc irq_desc for 42 on node -1
[ 0.605938] alloc kstat_irqs on node -1
[ 0.605946] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.606046] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.606091] alloc irq_desc for 43 on node -1
[ 0.606092] alloc kstat_irqs on node -1
[ 0.606101] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.606203] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.606249] alloc irq_desc for 44 on node -1
[ 0.606250] alloc kstat_irqs on node -1
[ 0.606259] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.606361] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.606406] alloc irq_desc for 45 on node -1
[ 0.606407] alloc kstat_irqs on node -1
[ 0.606416] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 0.606513] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.606559] alloc irq_desc for 46 on node -1
[ 0.606560] alloc kstat_irqs on node -1
[ 0.606568] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[ 0.606684] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.606796] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.607192] ACPI: AC Adapter [AC0] (on-line)
[ 0.607266] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.607286] ACPI: Lid Switch [LID0]
[ 0.607323] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.607328] ACPI: Power Button [PWRB]
[ 0.607366] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.607370] ACPI: Sleep Button [SLPB]
[ 0.607420] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.607423] ACPI: Power Button [PWRF]
[ 0.607612] ACPI: acpi_idle registered with cpuidle
[ 0.610043] Monitor-Mwait will be used to enter C-1 state
[ 0.610063] Monitor-Mwait will be used to enter C-3 state
[ 0.610067] Marking TSC unstable due to TSC halts in idle
[ 0.610087] hpet: hpet_set_mode(348):
[ 0.610090] hpet: ID: 0x8086a201, PERIOD: 0x429b17f
[ 0.610093] hpet: CFG: 0x3, STATUS: 0x0
[ 0.610097] hpet: COUNTER_l: 0xa30ae4, COUNTER_h: 0x0
[ 0.610100] hpet: T0: CFG_l: 0x13c, CFG_h: 0xf00000
[ 0.610104] hpet: T0: CMP_l: 0xa3ea17, CMP_h: 0x0
[ 0.610107] hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610110] hpet: T1: CFG_l: 0x0, CFG_h: 0xf00000
[ 0.610114] hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
[ 0.610117] hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610120] hpet: T2: CFG_l: 0x0, CFG_h: 0xf00800
[ 0.610124] hpet: T2: CMP_l: 0xc8ad01, CMP_h: 0x0
[ 0.610127] hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
[ 0.610154] Switching to clocksource hpet
[ 0.634087] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.634094] ACPI: Thermal Zone [THRM] (72 C)
[ 0.634144] ERST: Table is not found!
[ 0.634154] isapnp: Scanning for PnP cards...
[ 0.679376] ACPI: Battery Slot [BAT0] (battery present)
[ 0.988159] isapnp: No Plug & Play device found
[ 0.988345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.989681] brd: module loaded
[ 0.990170] loop: module loaded
[ 0.990315] ata_piix 0000:00:1f.1: version 2.13
[ 0.990327] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.990367] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.990449] scsi0 : ata_piix
[ 0.990523] scsi1 : ata_piix
[ 0.991008] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.991011] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.991091] pata_acpi 0000:08:00.1: enabling device (0000 -> 0001)
[ 0.991099] pata_acpi 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.991133] pata_acpi 0000:08:00.1: setting latency timer to 64
[ 0.991148] pata_acpi 0000:08:00.1: PCI INT B disabled
[ 0.991435] Fixed MDIO Bus: probed
[ 0.991465] PPP generic driver version 2.4.2
[ 0.991495] tun: Universal TUN/TAP device driver, 1.6
[ 0.991497] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.991567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.991584] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.991596] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.991600] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.991628] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.991658] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.995541] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.995556] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0804800
[ 1.008017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.008118] hub 1-0:1.0: USB hub found
[ 1.008124] hub 1-0:1.0: 4 ports detected
[ 1.008196] alloc irq_desc for 23 on node -1
[ 1.008198] alloc kstat_irqs on node -1
[ 1.008202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.008213] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.008216] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.008244] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.008272] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.012148] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.012164] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.028017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.028123] hub 2-0:1.0: USB hub found
[ 1.028128] hub 2-0:1.0: 6 ports detected
[ 1.028200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.028214] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.028231] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.028237] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.028240] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.028271] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.028307] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.028421] hub 3-0:1.0: USB hub found
[ 1.028425] hub 3-0:1.0: 2 ports detected
[ 1.028489] alloc irq_desc for 21 on node -1
[ 1.028491] alloc kstat_irqs on node -1
[ 1.028496] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.028502] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.028506] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.028533] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.028569] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.028677] hub 4-0:1.0: USB hub found
[ 1.028680] hub 4-0:1.0: 2 ports detected
[ 1.028743] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.028749] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.028753] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.028781] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.028807] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.028916] hub 5-0:1.0: USB hub found
[ 1.028920] hub 5-0:1.0: 2 ports detected
[ 1.028980] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.028987] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.028990] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.029019] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.029055] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.029159] hub 6-0:1.0: USB hub found
[ 1.029162] hub 6-0:1.0: 2 ports detected
[ 1.029225] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.029232] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.029235] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.029266] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.029291] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.029397] hub 7-0:1.0: USB hub found
[ 1.029401] hub 7-0:1.0: 2 ports detected
[ 1.029520] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.033044] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.034481] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.034487] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.034489] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.034492] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.034494] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.034544] mice: PS/2 mouse device common for all mice
[ 1.034703] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.034733] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.034816] device-mapper: uevent: version 1.0.3
[ 1.034914] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
[ 1.034968] device-mapper: multipath: version 1.1.1 loaded
[ 1.034971] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.035074] EISA: Probing bus 0 at eisa.0
[ 1.035076] EISA: Cannot allocate resource for mainboard
[ 1.035078] Cannot allocate resource for EISA slot 1
[ 1.035080] Cannot allocate resource for EISA slot 2
[ 1.035081] Cannot allocate resource for EISA slot 3
[ 1.035083] Cannot allocate resource for EISA slot 4
[ 1.035084] Cannot allocate resource for EISA slot 5
[ 1.035086] Cannot allocate resource for EISA slot 6
[ 1.035088] Cannot allocate resource for EISA slot 7
[ 1.035089] Cannot allocate resource for EISA slot 8
[ 1.035091] EISA: Detected 0 cards.
[ 1.035202] cpuidle: using governor ladder
[ 1.035296] cpuidle: using governor menu
[ 1.035566] TCP cubic registered
[ 1.035677] NET: Registered protocol family 10
[ 1.035997] lo: Disabled Privacy Extensions
[ 1.036229] NET: Registered protocol family 17
[ 1.036243] Registering the dns_resolver key type
[ 1.071719] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.076117] Using IPI No-Shortcut mode
[ 1.076184] PM: Resume from disk failed.
[ 1.076192] registered taskstats version 1
[ 1.076679] Magic number: 10:370:640
[ 1.076769] rtc_cmos 00:08: setting system clock to 2010-09-01 16:38:10 UTC (1283359090)
[ 1.076772] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.076774] EDD information not available.
[ 1.155734] ata1.00: ATAPI: Optiarc BD ROM BC-5500A, 1.41, max UDMA/33
[ 1.168312] ata1.00: configured for UDMA/33
[ 1.169650] scsi 0:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.41 PQ: 0 ANSI: 5
[ 1.172862] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.172864] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.172934] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.172977] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.173088] Freeing unused kernel memory: 732k freed
[ 1.173495] Write protecting the kernel text: 4984k
[ 1.173548] Write protecting the kernel read-only data: 2044k
[ 1.186605] udev: starting version 151
[ 1.186637] udevd (74): /proc/74/oom_adj is deprecated, please use /proc/74/oom_score_adj instead.
[ 1.238069] pata_jmicron 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.238111] pata_jmicron 0000:08:00.1: setting latency timer to 64
[ 1.259219] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.259246] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.259301] r8169 0000:06:00.0: setting latency timer to 64
[ 1.259379] alloc irq_desc for 47 on node -1
[ 1.259381] alloc kstat_irqs on node -1
[ 1.259398] r8169 0000:06:00.0: irq 47 for MSI/MSI-X
[ 1.259992] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xf80bc000, 00:03:0d:8c:20:33, XID 18000000 IRQ 47
[ 1.273477] scsi2 : pata_jmicron
[ 1.273726] sata_sil24 0000:07:00.0: version 1.1
[ 1.273748] sata_sil24 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.273802] sata_sil24 0000:07:00.0: setting latency timer to 64
[ 1.276574] ahci 0000:00:1f.2: version 3.0
[ 1.276589] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.276628] alloc irq_desc for 48 on node -1
[ 1.276630] alloc kstat_irqs on node -1
[ 1.276642] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[ 1.276714] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.276717] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.276722] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.292790] scsi3 : pata_jmicron
[ 1.292849] ata3: PATA max UDMA/100 cmd 0x6020 ctl 0x6014 bmdma 0x6000 irq 18
[ 1.292852] ata4: PATA max UDMA/100 cmd 0x6018 ctl 0x6010 bmdma 0x6008 irq 18
[ 1.294043] scsi4 : sata_sil24
[ 1.294089] ata5: SATA max UDMA/100 host m128@0xf0402000 port 0xf0400000 irq 16
[ 1.295569] scsi5 : ahci
[ 1.312405] scsi6 : ahci
[ 1.323488] scsi7 : ahci
[ 1.323631] ata6: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 48
[ 1.323635] ata7: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 48
[ 1.323639] ata8: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804200 irq 48
[ 1.323677] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.336094] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.336098] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.336105] ahci 0000:08:00.0: setting latency timer to 64
[ 1.336322] scsi8 : ahci
[ 1.336403] scsi9 : ahci
[ 1.336447] ata9: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600100 irq 17
[ 1.336452] ata10: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600180 irq 17
[ 1.396055] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.640085] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.644047] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.644074] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.772049] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.820074] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.828068] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.854339] ata9.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.854342] ata9.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.855428] ata9.00: configured for UDMA/133
[ 1.869165] ata10.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.869168] ata10.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.870202] ata10.00: configured for UDMA/133
[ 1.967431] usbcore: registered new interface driver hiddev
[ 1.982258] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[ 1.982327] generic-usb 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.0-1/input0
[ 2.010666] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input6
[ 2.010781] generic-usb 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.0-1/input1
[ 2.010794] usbcore: registered new interface driver usbhid
[ 2.010795] usbhid: USB HID core driver
[ 3.372098] ata5: SATA link down (SStatus 0 SControl 0)
[ 3.372308] scsi 8:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 3.372423] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 3.372560] scsi 9:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 3.372679] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 3.372739] sd 8:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.372748] sd 9:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.372798] sd 8:0:0:0: [sda] Write Protect is off
[ 3.372800] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.372804] sd 9:0:0:0: [sdb] Write Protect is off
[ 3.372807] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.372823] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.372829] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.411102] sda: sda1 sda2 sda4
[ 3.411364] sd 8:0:0:0: [sda] Attached SCSI disk
[ 3.434554] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.434835] sd 9:0:0:0: [sdb] Attached SCSI disk
[ 3.438378] ohci1394 0000:09:04.0: enabling device (0195 -> 0197)
[ 3.438385] alloc irq_desc for 20 on node -1
[ 3.438387] alloc kstat_irqs on node -1
[ 3.438394] ohci1394 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.493092] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.926518] EXT3-fs: barriers not enabled
[ 3.931983] kjournald starting. Commit interval 5 seconds
[ 3.932066] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 4.764515] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d0055014b3c]
[ 16.286419] udev: starting version 151
[ 16.450374] apparmor_parser[596]: segfault at 0 ip b775e24b sp bfa912bc error 4 in libc-2.11.1.so[b7646000+153000]
[ 16.451312] apparmor_parser[597]: segfault at 0 ip b76c324b sp bfbde61c error 4 in libc-2.11.1.so[b75ab000+153000]
[ 16.470988] Adding 3903788k swap on /dev/sdb3. Priority:-1 extents:1 across:3903788k
[ 16.575521] Linux agpgart interface v0.103
[ 16.590161] lp: driver loaded but no devices found
[ 16.714476] [drm] Initialized drm 1.1.0 20060810
[ 16.738957] acpi device:03: registered as cooling_device2
[ 16.739002] ACPI: Cant attach device
[ 16.739059] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 16.739105] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 16.770613] cfg80211: Calling CRDA to update world regulatory domain
[ 16.812934] cfg80211: World regulatory domain updated:
[ 16.812936] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.812939] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.812941] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.812943] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.812945] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.812947] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.093835] alloc irq_desc for 22 on node -1
[ 17.093838] alloc kstat_irqs on node -1
[ 17.093846] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.093898] alloc irq_desc for 49 on node -1
[ 17.093899] alloc kstat_irqs on node -1
[ 17.093911] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 17.093941] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.104710] [drm] radeon defaulting to kernel modesetting.
[ 17.104712] [drm] radeon kernel modesetting enabled.
[ 17.104759] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.104764] radeon 0000:01:00.0: setting latency timer to 64
[ 17.105611] [drm] initializing kernel modesetting (RV630 0x1002:0x9583).
[ 17.105712] [drm] register mmio base: 0xCFEF0000
[ 17.105714] [drm] register mmio size: 65536
[ 17.105847] ATOM BIOS: ECS_P75IM0_M76XT
[ 17.105857] [drm] Clocks initialized !
[ 17.105869] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 17.105871] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 17.107631] [drm] Detected VRAM RAM=256M, BAR=256M
[ 17.107634] [drm] RAM width 128bits DDR
[ 17.107729] [TTM] Zone kernel: Available graphics memory: 429808 kiB.
[ 17.107731] [TTM] Zone highmem: Available graphics memory: 1547412 kiB.
[ 17.107733] [TTM] Initializing pool allocator.
[ 17.107751] [drm] radeon: 256M of VRAM memory ready
[ 17.107753] [drm] radeon: 512M of GTT memory ready.
[ 17.107813] alloc irq_desc for 50 on node -1
[ 17.107815] alloc kstat_irqs on node -1
[ 17.107828] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[ 17.107835] [drm] radeon: using MSI.
[ 17.107868] [drm] radeon: irq initialized.
[ 17.107871] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 17.108405] [drm] Loading RV630 Microcode
[ 17.341955] hda_codec: ALC883: SKU not ready 0x598301f0
[ 17.477051] [drm] ring test succeeded in 1 usecs
[ 17.477197] [drm] radeon: ib pool ready.
[ 17.477264] [drm] ib test succeeded in 0 usecs
[ 17.477266] [drm] Enabling audio support
[ 17.478556] [drm] Default TV standard: NTSC
[ 17.478559] [drm] Default TV standard: NTSC
[ 17.478753] [drm] Default TV standard: NTSC
[ 17.478827] [drm] Radeon Display Connectors
[ 17.478829] [drm] Connector 0:
[ 17.478830] [drm] LVDS
[ 17.478832] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[ 17.478833] [drm] Encoders:
[ 17.478835] [drm] LCD1: INTERNAL_LVTM1
[ 17.478836] [drm] Connector 1:
[ 17.478838] [drm] DIN
[ 17.478839] [drm] Encoders:
[ 17.478840] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 17.478841] [drm] Connector 2:
[ 17.478842] [drm] HDMI-A
[ 17.478844] [drm] HPD1
[ 17.478846] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 17.478847] [drm] Encoders:
[ 17.478848] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 17.478850] [drm] Connector 3:
[ 17.478851] [drm] VGA
[ 17.478853] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 17.478854] [drm] Encoders:
[ 17.478856] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.521103] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 17.521105] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 17.521171] iwlagn 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.521179] iwlagn 0000:05:00.0: setting latency timer to 64
[ 17.521203] iwlagn 0000:05:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 17.538872] [drm] Internal thermal controller without fan control
[ 17.538948] [drm] radeon: power management initialized
[ 17.559969] iwlagn 0000:05:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 17.559984] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 17.560071] alloc irq_desc for 51 on node -1
[ 17.560074] alloc kstat_irqs on node -1
[ 17.560093] iwlagn 0000:05:00.0: irq 51 for MSI/MSI-X
[ 17.659492] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a/0x0
[ 17.698267] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 17.734157] iwlagn 0000:05:00.0: loaded firmware version 228.61.2.24
[ 17.852761] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.048272] EXT3-fs (sdb1): using internal journal
[ 18.264369] EXT3-fs: barriers not enabled
[ 18.264760] kjournald starting. Commit interval 5 seconds
[ 18.265142] EXT3-fs (sdb2): using internal journal
[ 18.265146] EXT3-fs (sdb2): mounted filesystem with ordered data mode
[ 18.425028] [drm] fb mappable at 0xD0141000
[ 18.425030] [drm] vram apper at 0xD0000000
[ 18.425031] [drm] size 9216000
[ 18.425033] [drm] fb depth is 24
[ 18.425034] [drm] pitch is 7680
[ 19.649707] Console: switching to colour frame buffer device 240x75
[ 19.658424] fb0: radeondrmfb frame buffer device
[ 19.658426] drm: registered panic notifier
[ 19.658438] [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0
[ 19.658707] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 19.658769] alloc irq_desc for 52 on node -1
[ 19.658771] alloc kstat_irqs on node -1
[ 19.658783] HDA Intel 0000:01:00.1: irq 52 for MSI/MSI-X
[ 19.658814] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 19.693382] apparmor_parser[955]: segfault at 0 ip b784e24b sp bfbfd69c error 4 in libc-2.11.1.so[b7736000+153000]
[ 19.718601] r8169 0000:06:00.0: eth0: link up
[ 19.718608] r8169 0000:06:00.0: eth0: link up
[ 19.813142] apparmor_parser[1066]: segfault at 0 ip 08050ce1 sp bfbb7a40 error 4 in apparmor_parser[8048000+bd000]
[ 20.111769] apm: BIOS not found.
[ 20.482485] ppdev: user-space parallel port driver
[ 21.597738] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 29.968064] eth0: no IPv6 routers present