[patch 103/164] clocksource: sh_tmu: compute mult and shift before registration

From: Greg KH
Date: Thu Jul 01 2010 - 17:09:42 EST


2.6.33-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aurelien Jarno <aurelien@xxxxxxxxxxx>

commit 66f49121ffa41a19c59965b31b046d8368fec3c7 upstream.

Since commit 98962465ed9e6ea99c38e0af63fe1dcb5a79dc25 ("nohz: Prevent
clocksource wrapping during idle"), the CPU of an R2D board never goes
to idle. This commit assumes that mult and shift are assigned before
the clocksource is registered. As a consequence the safe maximum sleep
time is negative and the CPU never goes into idle.

This patch fixes the problem by moving mult and shift initialization
from sh_tmu_clocksource_enable() to sh_tmu_register_clocksource().

Signed-off-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>
Signed-off-by: Paul Mundt <lethal@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/clocksource/sh_tmu.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)

--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -199,16 +199,8 @@ static cycle_t sh_tmu_clocksource_read(s
static int sh_tmu_clocksource_enable(struct clocksource *cs)
{
struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
- int ret;

- ret = sh_tmu_enable(p);
- if (ret)
- return ret;
-
- /* TODO: calculate good shift from rate and counter bit width */
- cs->shift = 10;
- cs->mult = clocksource_hz2mult(p->rate, cs->shift);
- return 0;
+ return sh_tmu_enable(p);
}

static void sh_tmu_clocksource_disable(struct clocksource *cs)
@@ -228,6 +220,16 @@ static int sh_tmu_register_clocksource(s
cs->disable = sh_tmu_clocksource_disable;
cs->mask = CLOCKSOURCE_MASK(32);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /* clk_get_rate() needs an enabled clock */
+ clk_enable(p->clk);
+ /* channel will be configured at parent clock / 4 */
+ p->rate = clk_get_rate(p->clk) / 4;
+ clk_disable(p->clk);
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 10;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+
pr_info("sh_tmu: %s used as clock source\n", cs->name);
clocksource_register(cs);
return 0;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/